[Mon Oct 10 00:22:44 2011] Detection parameters:
  Position = (521.7, 493.6) = 19 24 10.26 50 16 5.7
  Extent = 0.8" x 0.5", rotation angle = 76 degrees
  Source counts = 58.9 +/- 7.8
  Background counts = 2.1
  Rate = 0.002 +/- 0.0003

[Mon Oct 10 00:22:46 2011] Off-axis axis estimate = 3.71'
[Mon Oct 10 00:23:24 2011] Using EEF radius (= 0.75 ")to estimate initial spatial extent for simple fitting
[Mon Oct 10 00:23:24 2011] Initial guess for spatial extent in simple fitting = 0.75"
[Mon Oct 10 00:23:24 2011] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.981
[Mon Oct 10 00:23:24 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 0.75"
[Mon Oct 10 00:23:24 2011] fullrun_ccd6_acisf09867_pi14-548_cl_pass0_src3.ximg exists
[Mon Oct 10 00:23:24 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf09867_pi14-548_cl_pass0_src3.csv
[Mon Oct 10 00:23:24 2011] fullrun_ccd6_acisf09867_pi14-548_cl_pass0_src3_1.ximg exists
[Mon Oct 10 00:23:24 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf09867_pi14-548_cl_pass0_src3.csv
[Mon Oct 10 00:23:24 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf09867_pi14-548_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf09867_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 10 00:23:25 2011] fullrun_ccd6_acisf09867_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Mon Oct 10 00:23:25 2011] fullrun_ccd6_acisf09867_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Mon Oct 10 00:23:25 2011] Fit fullrun_ccd6_acisf09867_pi14-548_cl_pass0_tfrozen_src3 appears to have run properly
[Mon Oct 10 00:23:31 2011] Spatial fit model total counts = 62.061700, observed total counts = 63.000000
[Mon Oct 10 00:23:31 2011] Offset between fit and detection position for source 2 = 0.633324 pixels
[Mon Oct 10 00:23:31 2011] 61.669248 total counts/ 0.914048 bgd. counts: snr = 63.547571
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.633324 pixels
  Position = (522.2, 494.0) = 19 24 10.26 50 16 5.7
  Extent = 1.0 (0.9-1.3)", rotation angle = 0
  Source counts = 60.8 +/- 7.9
  Background counts = 0.9
  Rate = 0.002 +/- 0.0003
[Mon Oct 10 00:23:31 2011] Vigneting correction estimate = 1.000000
[Mon Oct 10 00:23:31 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 10 00:23:31 2011] Assessing source extent using major axis lower bound
[Mon Oct 10 00:23:31 2011] Source does appear to be extended
[Mon Oct 10 00:23:31 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 10 00:23:50 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Oct 10 00:23:50 2011] Initial guess for spatial extent in simple fitting = 1.04"
[Mon Oct 10 00:23:50 2011] source mask rpix=2.1, npix_max = 27, mask sum = 30, frac = 1.099
[Mon Oct 10 00:23:50 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 1.04"
[Mon Oct 10 00:23:51 2011] fullrun_ccd6_acisf09867_pi14-548_cl_pass1_src3.ximg exists
[Mon Oct 10 00:23:51 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf09867_pi14-548_cl_pass1_src3.csv
[Mon Oct 10 00:23:51 2011] fullrun_ccd6_acisf09867_pi14-548_cl_pass1_src3_1.ximg exists
[Mon Oct 10 00:23:51 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf09867_pi14-548_cl_pass1_src3.csv
[Mon Oct 10 00:23:51 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf09867_pi14-548_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf09867_pi14-548_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 10 00:23:51 2011] fullrun_ccd6_acisf09867_pi14-548_cl_pass1_tfrozen_src3.ximg exists
[Mon Oct 10 00:23:51 2011] fullrun_ccd6_acisf09867_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists
[Mon Oct 10 00:23:51 2011] Fit fullrun_ccd6_acisf09867_pi14-548_cl_pass1_tfrozen_src3 appears to have run properly
[Mon Oct 10 00:24:00 2011] Spatial fit model total counts = 61.620600, observed total counts = 63.000000
[Mon Oct 10 00:24:00 2011] Offset between fit and detection position for source 2 = 0.063350 pixels
[Mon Oct 10 00:24:00 2011] 61.353457 total counts/ 0.566157 bgd. counts: snr = 80.787545
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.063350 pixels
  Position = (522.2, 494.0) = 19 24 10.26 50 16 5.6
  Extent = 1.1 (0.9-1.2)", rotation angle = 0
  Source counts = 60.8 +/- 7.8
  Background counts = 0.6
  Rate = 0.002 +/- 0.0003
[Mon Oct 10 00:24:00 2011] Vigneting correction estimate = 1.000000
[Mon Oct 10 00:24:00 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 10 00:24:00 2011] Assessing source extent using major axis lower bound
[Mon Oct 10 00:24:00 2011] Source does appear to be extended
[Mon Oct 10 00:24:00 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 10 00:25:03 2011] Not overwriting source region fullrun_ccd6_acisf09867_pi14-548_pass1_cl_src2_src.reg
[Mon Oct 10 00:25:03 2011] Extracting stamp from image fullrun_ccd6_acisf09867_pi14-548_cl_sm2.00.img.gz, (473, 445) - (571, 543)
[Mon Oct 10 00:25:03 2011] Writing fullrun_ccd6_acisf09867_pi14-548_pass1_cl_src2.gif
[Mon Oct 10 00:25:10 2011] ../../acisf09867/products/events/fullrun_ccd6_acisf09867_pi14-548_pass1_cl_src2_src.evt and ../../acisf09867/products/events/fullrun_ccd6_acisf09867_pi14-548_pass1_cl_src2_bgd.evt exist, delete to re-create
[Mon Oct 10 00:25:10 2011] Size of ../../acisf09867/products/events/fullrun_ccd6_acisf09867_pi14-548_pass1_cl_src2_src.evt.gz[events] = 62 counts
[Mon Oct 10 00:25:10 2011] Mean chipx,y = (788.21, 432.73)
[Mon Oct 10 00:25:10 2011] Mean tdetx,y = (3663.21, 2134.73)
[Mon Oct 10 00:25:10 2011] chipx,y range = (770.00-807.00, 414.00-454.00)
[Mon Oct 10 00:25:10 2011] Size of ../../acisf09867/products/events/fullrun_ccd6_acisf09867_pi14-548_pass1_cl_src2_bgd.evt.gz[events] = 40 counts
[Mon Oct 10 00:25:10 2011] ../../acisf09867/products/images/fullrun_ccd6_acisf09867_pi14-548_pass1_cl_src2_src.img and ../../acisf09867/products/images/fullrun_ccd6_acisf09867_pi14-548_pass1_cl_src2_bgd.img exist, delete to re-create
[Mon Oct 10 00:25:10 2011] ../../acisf09867/products/spectra/fullrun_ccd6_acisf09867_pi14-548_pass1_cl_src2_src.pi and ../../acisf09867/products/spectra/fullrun_ccd6_acisf09867_pi14-548_pass1_cl_src2_bgd.pi exist, delete to re-create
[Mon Oct 10 00:25:10 2011] Not generating rmf since there are only 60 counts
[Mon Oct 10 00:25:12 2011] ../../acisf09867/products/lightcurves/fullrun_ccd6_acisf09867_pi14-548_pass1_cl_src2_src.lc and ../../acisf09867/products/lightcurves/fullrun_ccd6_acisf09867_pi14-548_pass1_cl_src2_bgd.lc exist, delete to re-create
[Mon Oct 10 00:25:48 2011] 199.232
[Mon Oct 10 00:26:58 2011] Updating aperture counts using extracted products
[Mon Oct 10 00:26:58 2011] Error reading totcts from fullrun_ccd6_acisf09867_pi14-548_pass1_cl_src2_src.pi.gz
[Mon Oct 10 00:26:59 2011] Calculating source flux in energy range 0.30-8.00
[Mon Oct 10 00:26:59 2011] Using photon index=1.80, rate=0.00245, arf fullrun_ccd6_acisf09867_pi14-548_pass1_cl_src2.arf
[Mon Oct 10 00:26:59 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Oct 10 00:26:59 2011] Updating source flux to 2.6e-14
[Mon Oct 10 00:27:03 2011] Source 2 has fewer than 100.000000 counts, skipping spectral fitting