[Mon Oct 10 00:22:43 2011] Detection parameters:
  Position = (875.4, 363.1) = 19 25 23.34 50 18 43.3
  Extent = 4.0" x 2.0", rotation angle = 134 degrees
  Source counts = 27.1 +/- 6.2
  Background counts = 11.9
  Rate = 0.001 +/- 0.0003

[Mon Oct 10 00:22:44 2011] Off-axis axis estimate = 9.33'
[Mon Oct 10 00:23:22 2011] Using EEF radius (= 3.85 ")to estimate initial spatial extent for simple fitting
[Mon Oct 10 00:23:22 2011] Initial guess for spatial extent in simple fitting = 3.85"
[Mon Oct 10 00:23:22 2011] source mask rpix=7.8, npix_max = 277, mask sum = 272, frac = 0.980
[Mon Oct 10 00:23:22 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 3.85"
[Mon Oct 10 00:23:23 2011] fullrun_ccd3_acisf09867_pi14-548_cl_pass0_src3.ximg exists
[Mon Oct 10 00:23:23 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf09867_pi14-548_cl_pass0_src3.csv
[Mon Oct 10 00:23:23 2011] fullrun_ccd3_acisf09867_pi14-548_cl_pass0_src3_1.ximg exists
[Mon Oct 10 00:23:23 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf09867_pi14-548_cl_pass0_src3.csv
[Mon Oct 10 00:23:23 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf09867_pi14-548_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf09867_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 10 00:23:24 2011] fullrun_ccd3_acisf09867_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Mon Oct 10 00:23:24 2011] fullrun_ccd3_acisf09867_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Mon Oct 10 00:23:24 2011] Fit fullrun_ccd3_acisf09867_pi14-548_cl_pass0_tfrozen_src3 appears to have run properly
[Mon Oct 10 00:23:29 2011] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 45.209354 pixels away
[Mon Oct 10 00:23:29 2011] Vigneting correction estimate = 1.000000
[Mon Oct 10 00:23:29 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 10 00:23:29 2011] Assessing source extent using major
[Mon Oct 10 00:23:29 2011] Source does appear to be extended
[Mon Oct 10 00:23:29 2011] Computing asymmetry using major and minor axis, asym = 2.02
[Mon Oct 10 00:23:29 2011] Source is asymmetric
[Mon Oct 10 00:23:48 2011] Using EEF radius (= 3.85 ")to estimate initial spatial extent for simple fitting
[Mon Oct 10 00:23:48 2011] Initial guess for spatial extent in simple fitting = 3.85"
[Mon Oct 10 00:23:48 2011] source mask rpix=7.8, npix_max = 277, mask sum = 272, frac = 0.980
[Mon Oct 10 00:23:48 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 3.85"
[Mon Oct 10 00:23:49 2011] fullrun_ccd3_acisf09867_pi14-548_cl_pass1_src3.ximg exists
[Mon Oct 10 00:23:49 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf09867_pi14-548_cl_pass1_src3.csv
[Mon Oct 10 00:23:49 2011] fullrun_ccd3_acisf09867_pi14-548_cl_pass1_src3_1.ximg exists
[Mon Oct 10 00:23:49 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf09867_pi14-548_cl_pass1_src3.csv
[Mon Oct 10 00:23:49 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf09867_pi14-548_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf09867_pi14-548_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 10 00:23:49 2011] fullrun_ccd3_acisf09867_pi14-548_cl_pass1_tfrozen_src3.ximg exists
[Mon Oct 10 00:23:50 2011] fullrun_ccd3_acisf09867_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists
[Mon Oct 10 00:23:50 2011] Fit fullrun_ccd3_acisf09867_pi14-548_cl_pass1_tfrozen_src3 appears to have run properly
[Mon Oct 10 00:23:59 2011] Spatial fit model total counts = 51.219500, observed total counts = 52.000000
[Mon Oct 10 00:23:59 2011] Offset between fit and detection position for source 2 = 2.753362 pixels
[Mon Oct 10 00:23:59 2011] 52.168100 total counts/ 32.004500 bgd. counts: snr = 3.564204
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 2.753362 pixels
  Position = (877.9, 361.9) = 19 25 23.24 50 18 42.4
  Extent = 2.4 (1.0-3.8)", rotation angle = 0
  Source counts = 20.2 +/- 7.2
  Background counts = 32.0
  Rate = 0.0008 +/- 0.0003
[Mon Oct 10 00:23:59 2011] Vigneting correction estimate = 1.000000
[Mon Oct 10 00:23:59 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 10 00:23:59 2011] Assessing source extent using major axis lower bound
[Mon Oct 10 00:23:59 2011] Source does appear to be extended
[Mon Oct 10 00:23:59 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 10 00:24:28 2011] Not overwriting source region fullrun_ccd3_acisf09867_pi14-548_pass1_cl_src2_src.reg
[Mon Oct 10 00:24:28 2011] Extracting stamp from image fullrun_ccd3_acisf09867_pi14-548_cl_sm2.00.img.gz, (768, 252) - (988, 472)
[Mon Oct 10 00:24:28 2011] Writing fullrun_ccd3_acisf09867_pi14-548_pass1_cl_src2.gif
[Mon Oct 10 00:24:35 2011] ../../acisf09867/products/events/fullrun_ccd3_acisf09867_pi14-548_pass1_cl_src2_src.evt and ../../acisf09867/products/events/fullrun_ccd3_acisf09867_pi14-548_pass1_cl_src2_bgd.evt exist, delete to re-create
[Mon Oct 10 00:24:35 2011] Size of ../../acisf09867/products/events/fullrun_ccd3_acisf09867_pi14-548_pass1_cl_src2_src.evt.gz[events] = 38 counts
[Mon Oct 10 00:24:35 2011] Mean chipx,y = (130.68, 466.82)
[Mon Oct 10 00:24:35 2011] Mean tdetx,y = (4665.18, 3191.68)
[Mon Oct 10 00:24:35 2011] chipx,y range = (100.00-159.00, 434.00-497.00)
[Mon Oct 10 00:24:35 2011] Size of ../../acisf09867/products/events/fullrun_ccd3_acisf09867_pi14-548_pass1_cl_src2_bgd.evt.gz[events] = 101 counts
[Mon Oct 10 00:24:36 2011] ../../acisf09867/products/images/fullrun_ccd3_acisf09867_pi14-548_pass1_cl_src2_src.img and ../../acisf09867/products/images/fullrun_ccd3_acisf09867_pi14-548_pass1_cl_src2_bgd.img exist, delete to re-create
[Mon Oct 10 00:24:36 2011] ../../acisf09867/products/spectra/fullrun_ccd3_acisf09867_pi14-548_pass1_cl_src2_src.pi and ../../acisf09867/products/spectra/fullrun_ccd3_acisf09867_pi14-548_pass1_cl_src2_bgd.pi exist, delete to re-create
[Mon Oct 10 00:24:36 2011] Not generating rmf since there are only 20 counts
[Mon Oct 10 00:24:38 2011] ../../acisf09867/products/lightcurves/fullrun_ccd3_acisf09867_pi14-548_pass1_cl_src2_src.lc and ../../acisf09867/products/lightcurves/fullrun_ccd3_acisf09867_pi14-548_pass1_cl_src2_bgd.lc exist, delete to re-create
[Mon Oct 10 00:25:03 2011] 168.073
[Mon Oct 10 00:26:58 2011] Updating aperture counts using extracted products
[Mon Oct 10 00:26:58 2011] Error reading totcts from fullrun_ccd3_acisf09867_pi14-548_pass1_cl_src2_src.pi.gz
[Mon Oct 10 00:26:58 2011] Calculating source flux in energy range 0.30-8.00
[Mon Oct 10 00:26:58 2011] Using photon index=1.80, rate=0.000811, arf fullrun_ccd3_acisf09867_pi14-548_pass1_cl_src2.arf
[Mon Oct 10 00:26:58 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Oct 10 00:26:58 2011] Updating source flux to 1.1e-14
[Mon Oct 10 00:27:02 2011] Source 2 has fewer than 100.000000 counts, skipping spectral fitting
[Mon Oct 10 00:27:03 2011] acisf09867/analysis//spectral/fullrun_ccd3_acisf09867_pi14-548_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete