[Wed Oct 26 13:16:49 2011] Detection parameters:
  Position = (950.0, 1073.1) = 18 19 20.05 -13 49 12.9
  Extent = 1.0" x 0.5", rotation angle = 77 degrees
  Source counts = 33.8 +/- 5.9
  Background counts = 1.2
  Rate = 0.001 +/- 0.0002

[Wed Oct 26 13:16:51 2011] Off-axis axis estimate = 4.15'
[Wed Oct 26 13:17:42 2011] Using EEF radius (= 0.88 ")to estimate initial spatial extent for simple fitting
[Wed Oct 26 13:17:42 2011] Initial guess for spatial extent in simple fitting = 0.88"
[Wed Oct 26 13:17:42 2011] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.770
[Wed Oct 26 13:17:42 2011] Giving source the simple spatial ID 7 for pass 0, mean size = 0.88"
[Wed Oct 26 13:17:43 2011] fullrun_ccd3_acisf09864_pi14-548_cl_pass0_src7.ximg exists
[Wed Oct 26 13:17:43 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf09864_pi14-548_cl_pass0_src7.csv
[Wed Oct 26 13:17:43 2011] fullrun_ccd3_acisf09864_pi14-548_cl_pass0_src7_1.ximg exists
[Wed Oct 26 13:17:43 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf09864_pi14-548_cl_pass0_src7.csv
[Wed Oct 26 13:17:43 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf09864_pi14-548_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf09864_pi14-548_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 26 13:17:44 2011] fullrun_ccd3_acisf09864_pi14-548_cl_pass0_tfrozen_src7.ximg exists
[Wed Oct 26 13:17:44 2011] fullrun_ccd3_acisf09864_pi14-548_cl_pass0_tfrozen_src7_1.ximg exists
[Wed Oct 26 13:17:44 2011] Fit fullrun_ccd3_acisf09864_pi14-548_cl_pass0_tfrozen_src7 appears to have run properly
[Wed Oct 26 13:17:58 2011] Spatial fit model total counts = 39.384500, observed total counts = 40.000000
[Wed Oct 26 13:17:58 2011] Offset between fit and detection position for source 10 = 0.770595 pixels
[Wed Oct 26 13:17:58 2011] 39.872500 total counts/ 16.981700 bgd. counts: snr = 5.554825
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.770595 pixels
  Position = (950.6, 1073.5) = 18 19 20.04 -13 49 13.0
  Extent = 0.5 (0.4-0.9)", rotation angle = 0
  Source counts = 22.9 +/- 6.3
  Background counts = 17.0
  Rate = 0.001 +/- 0.0003
[Wed Oct 26 13:17:58 2011] Vigneting correction estimate = 1.000000
[Wed Oct 26 13:17:58 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 26 13:17:58 2011] Assessing source extent using major axis lower bound
[Wed Oct 26 13:17:58 2011] Source does appear to be extended
[Wed Oct 26 13:17:58 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct 26 13:18:23 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Oct 26 13:18:23 2011] Initial guess for spatial extent in simple fitting = 0.55"
[Wed Oct 26 13:18:23 2011] source mask rpix=1.1, npix_max = 10, mask sum = 9, frac = 0.860
[Wed Oct 26 13:18:23 2011] Giving source the simple spatial ID 7 for pass 1, mean size = 0.55"
[Wed Oct 26 13:18:24 2011] fullrun_ccd3_acisf09864_pi14-548_cl_pass1_src7.ximg exists
[Wed Oct 26 13:18:24 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf09864_pi14-548_cl_pass1_src7.csv
[Wed Oct 26 13:18:24 2011] fullrun_ccd3_acisf09864_pi14-548_cl_pass1_src7_1.ximg exists
[Wed Oct 26 13:18:24 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf09864_pi14-548_cl_pass1_src7.csv
[Wed Oct 26 13:18:24 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf09864_pi14-548_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf09864_pi14-548_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 26 13:18:25 2011] fullrun_ccd3_acisf09864_pi14-548_cl_pass1_tfrozen_src7.ximg exists
[Wed Oct 26 13:18:25 2011] fullrun_ccd3_acisf09864_pi14-548_cl_pass1_tfrozen_src7_1.ximg exists
[Wed Oct 26 13:18:25 2011] Fit fullrun_ccd3_acisf09864_pi14-548_cl_pass1_tfrozen_src7 appears to have run properly
[Wed Oct 26 13:18:39 2011] Spatial fit model total counts = 39.813100, observed total counts = 40.000000
[Wed Oct 26 13:18:39 2011] Offset between fit and detection position for source 10 = 0.034037 pixels
[Wed Oct 26 13:18:39 2011] 40.312900 total counts/ 17.138400 bgd. counts: snr = 5.597901
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.034037 pixels
  Position = (950.6, 1073.5) = 18 19 20.04 -13 49 13.0
  Extent = 0.6 (0.4-0.9)", rotation angle = 0
  Source counts = 23.2 +/- 6.3
  Background counts = 17.1
  Rate = 0.001 +/- 0.0003
[Wed Oct 26 13:18:39 2011] Vigneting correction estimate = 1.000000
[Wed Oct 26 13:18:39 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 26 13:18:39 2011] Assessing source extent using major axis lower bound
[Wed Oct 26 13:18:39 2011] Source does appear to be extended
[Wed Oct 26 13:18:39 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct 26 13:23:07 2011] Not overwriting source region fullrun_ccd3_acisf09864_pi14-548_pass1_cl_src10_src.reg
[Wed Oct 26 13:23:07 2011] Extracting stamp from image fullrun_ccd3_acisf09864_pi14-548_cl_sm2.00.img.gz, (925, 1047) - (977, 1100)
[Wed Oct 26 13:23:07 2011] Writing fullrun_ccd3_acisf09864_pi14-548_pass1_cl_src10.gif
[Wed Oct 26 13:23:27 2011] ../../acisf09864/products/events/fullrun_ccd3_acisf09864_pi14-548_pass1_cl_src10_src.evt and ../../acisf09864/products/events/fullrun_ccd3_acisf09864_pi14-548_pass1_cl_src10_bgd.evt exist, delete to re-create
[Wed Oct 26 13:23:27 2011] Size of ../../acisf09864/products/events/fullrun_ccd3_acisf09864_pi14-548_pass1_cl_src10_src.evt.gz[events] = 29 counts
[Wed Oct 26 13:23:27 2011] Mean chipx,y = (451.14, 978.07)
[Wed Oct 26 13:23:27 2011] Mean tdetx,y = (4153.93, 3512.14)
[Wed Oct 26 13:23:27 2011] chipx,y range = (429.00-464.00, 958.00-996.00)
[Wed Oct 26 13:23:27 2011] Size of ../../acisf09864/products/events/fullrun_ccd3_acisf09864_pi14-548_pass1_cl_src10_bgd.evt.gz[events] = 9 counts
[Wed Oct 26 13:23:27 2011] ../../acisf09864/products/images/fullrun_ccd3_acisf09864_pi14-548_pass1_cl_src10_src.img and ../../acisf09864/products/images/fullrun_ccd3_acisf09864_pi14-548_pass1_cl_src10_bgd.img exist, delete to re-create
[Wed Oct 26 13:23:27 2011] ../../acisf09864/products/spectra/fullrun_ccd3_acisf09864_pi14-548_pass1_cl_src10_src.pi and ../../acisf09864/products/spectra/fullrun_ccd3_acisf09864_pi14-548_pass1_cl_src10_bgd.pi exist, delete to re-create
[Wed Oct 26 13:23:27 2011] Not generating rmf since there are only 23 counts
[Wed Oct 26 13:23:30 2011] ../../acisf09864/products/lightcurves/fullrun_ccd3_acisf09864_pi14-548_pass1_cl_src10_src.lc and ../../acisf09864/products/lightcurves/fullrun_ccd3_acisf09864_pi14-548_pass1_cl_src10_bgd.lc exist, delete to re-create
[Wed Oct 26 13:25:12 2011] 184.117
[Wed Oct 26 13:25:19 2011] Updating aperture counts using extracted products
[Wed Oct 26 13:25:19 2011] Error reading totcts from fullrun_ccd3_acisf09864_pi14-548_pass1_cl_src10_src.pi.gz
[Wed Oct 26 13:25:19 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct 26 13:25:19 2011] Using photon index=1.80, rate=0.000974, arf fullrun_ccd3_acisf09864_pi14-548_pass1_cl_src10.arf
[Wed Oct 26 13:25:19 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Oct 26 13:25:19 2011] Updating source flux to 1.5e-14
[Wed Oct 26 13:25:30 2011] Source 10 has fewer than 100.000000 counts, skipping spectral fitting
[Wed Oct 26 13:25:31 2011] acisf09864/analysis//spectral/fullrun_ccd3_acisf09864_pi14-548_pass1_cl_src10_pl.csv not found, spectral fit skipped or did not complete