[Wed Oct 26 13:16:45 2011] Detection parameters:
  Position = (242.7, 516.2) = 18 19 28.57 -13 46 4.0
  Extent = 0.9" x 0.5", rotation angle = 108 degrees
  Source counts = 12.1 +/- 3.6
  Background counts = 0.9
  Rate = 0.0005 +/- 0.0002

[Wed Oct 26 13:16:48 2011] Off-axis axis estimate = 1.76'
[Wed Oct 26 13:17:40 2011] Using EEF radius (= 0.41 ")to estimate initial spatial extent for simple fitting
[Wed Oct 26 13:17:40 2011] Initial guess for spatial extent in simple fitting = 0.41"
[Wed Oct 26 13:17:40 2011] source mask rpix=0.8, npix_max = 7, mask sum = 9, frac = 1.270
[Wed Oct 26 13:17:40 2011] Giving source the simple spatial ID 28 for pass 0, mean size = 0.41"
[Wed Oct 26 13:17:42 2011] fullrun_ccd2_acisf09864_pi14-548_cl_pass0_src28.ximg exists
[Wed Oct 26 13:17:42 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf09864_pi14-548_cl_pass0_src28.csv
[Wed Oct 26 13:17:42 2011] fullrun_ccd2_acisf09864_pi14-548_cl_pass0_src28_1.ximg exists
[Wed Oct 26 13:17:42 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf09864_pi14-548_cl_pass0_src28.csv
[Wed Oct 26 13:17:42 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf09864_pi14-548_cl_pass0_src28_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf09864_pi14-548_cl_pass0_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 26 13:17:42 2011] fullrun_ccd2_acisf09864_pi14-548_cl_pass0_tfrozen_src28.ximg exists
[Wed Oct 26 13:17:42 2011] fullrun_ccd2_acisf09864_pi14-548_cl_pass0_tfrozen_src28_1.ximg exists
[Wed Oct 26 13:17:42 2011] Fit fullrun_ccd2_acisf09864_pi14-548_cl_pass0_tfrozen_src28 appears to have run properly
[Wed Oct 26 13:17:55 2011] Spatial fit model total counts = 13.716900, observed total counts = 14.000000
[Wed Oct 26 13:17:55 2011] Offset between fit and detection position for source 31 = 0.891214 pixels
[Wed Oct 26 13:17:55 2011] 13.348150 total counts/ 2.697650 bgd. counts: snr = 6.484510
Spatial fit parameters:
  Offset between fit and detection position for source 31 = 0.891214 pixels
  Position = (243.5, 516.5) = 18 19 28.56 -13 46 4.1
  Extent = 0.7 (0.4-0.9)", rotation angle = 0
  Source counts = 10.7 +/- 3.7
  Background counts = 2.7
  Rate = 0.0004 +/- 0.0002
[Wed Oct 26 13:17:55 2011] Vigneting correction estimate = 1.000000
[Wed Oct 26 13:17:55 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 26 13:17:55 2011] Assessing source extent using major axis lower bound
[Wed Oct 26 13:17:55 2011] Source does appear to be extended
[Wed Oct 26 13:17:55 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct 26 13:18:22 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Oct 26 13:18:22 2011] Initial guess for spatial extent in simple fitting = 0.67"
[Wed Oct 26 13:18:22 2011] source mask rpix=1.4, npix_max = 13, mask sum = 9, frac = 0.647
[Wed Oct 26 13:18:22 2011] Giving source the simple spatial ID 28 for pass 1, mean size = 0.67"
[Wed Oct 26 13:18:23 2011] fullrun_ccd2_acisf09864_pi14-548_cl_pass1_src28.ximg exists
[Wed Oct 26 13:18:23 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf09864_pi14-548_cl_pass1_src28.csv
[Wed Oct 26 13:18:23 2011] fullrun_ccd2_acisf09864_pi14-548_cl_pass1_src28_1.ximg exists
[Wed Oct 26 13:18:23 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf09864_pi14-548_cl_pass1_src28.csv
[Wed Oct 26 13:18:23 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf09864_pi14-548_cl_pass1_src28_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf09864_pi14-548_cl_pass1_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 26 13:18:23 2011] fullrun_ccd2_acisf09864_pi14-548_cl_pass1_tfrozen_src28.ximg exists
[Wed Oct 26 13:18:23 2011] fullrun_ccd2_acisf09864_pi14-548_cl_pass1_tfrozen_src28_1.ximg exists
[Wed Oct 26 13:18:23 2011] Fit fullrun_ccd2_acisf09864_pi14-548_cl_pass1_tfrozen_src28 appears to have run properly
[Wed Oct 26 13:18:36 2011] Spatial fit model total counts = 12.561900, observed total counts = 14.000000
[Wed Oct 26 13:18:36 2011] Offset between fit and detection position for source 31 = 0.423337 pixels
[Wed Oct 26 13:18:36 2011] 12.316480 total counts/ 1.098680 bgd. counts: snr = 10.702176
Spatial fit parameters:
  Offset between fit and detection position for source 31 = 0.423337 pixels
  Position = (243.6, 516.1) = 18 19 28.56 -13 46 4.3
  Extent = 1.0 (0.6-1.5)" x 0.4 (0.3-0.7)", rotation angle = 95 (75-120) degrees
  Source counts = 11.2 +/- 3.5
  Background counts = 1.1
  Rate = 0.0005 +/- 0.0001
[Wed Oct 26 13:18:36 2011] Vigneting correction estimate = 1.000000
[Wed Oct 26 13:18:36 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 26 13:18:36 2011] Assessing source extent using major axis lower bound
[Wed Oct 26 13:18:36 2011] Source does appear to be extended
[Wed Oct 26 13:18:36 2011] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.95
[Wed Oct 26 13:20:31 2011] Not overwriting source region fullrun_ccd2_acisf09864_pi14-548_pass1_cl_src31_src.reg
[Wed Oct 26 13:20:31 2011] Extracting stamp from image fullrun_ccd2_acisf09864_pi14-548_cl_sm2.00.img.gz, (199, 471) - (289, 561)
[Wed Oct 26 13:20:31 2011] Writing fullrun_ccd2_acisf09864_pi14-548_pass1_cl_src31.gif
[Wed Oct 26 13:21:50 2011] ../../acisf09864/products/events/fullrun_ccd2_acisf09864_pi14-548_pass1_cl_src31_src.evt and ../../acisf09864/products/events/fullrun_ccd2_acisf09864_pi14-548_pass1_cl_src31_bgd.evt exist, delete to re-create
[Wed Oct 26 13:21:50 2011] Size of ../../acisf09864/products/events/fullrun_ccd2_acisf09864_pi14-548_pass1_cl_src31_src.evt.gz[events] = 12 counts
[Wed Oct 26 13:21:50 2011] Mean chipx,y = (178.33, 854.25)
[Wed Oct 26 13:21:50 2011] Mean tdetx,y = (3915.25, 3907.67)
[Wed Oct 26 13:21:50 2011] chipx,y range = (164.00-198.00, 842.00-874.00)
[Wed Oct 26 13:21:50 2011] Size of ../../acisf09864/products/events/fullrun_ccd2_acisf09864_pi14-548_pass1_cl_src31_bgd.evt.gz[events] = 29 counts
[Wed Oct 26 13:21:50 2011] ../../acisf09864/products/images/fullrun_ccd2_acisf09864_pi14-548_pass1_cl_src31_src.img and ../../acisf09864/products/images/fullrun_ccd2_acisf09864_pi14-548_pass1_cl_src31_bgd.img exist, delete to re-create
[Wed Oct 26 13:21:50 2011] ../../acisf09864/products/spectra/fullrun_ccd2_acisf09864_pi14-548_pass1_cl_src31_src.pi and ../../acisf09864/products/spectra/fullrun_ccd2_acisf09864_pi14-548_pass1_cl_src31_bgd.pi exist, delete to re-create
[Wed Oct 26 13:21:50 2011] Not generating rmf since there are only 11 counts
[Wed Oct 26 13:21:52 2011] ../../acisf09864/products/lightcurves/fullrun_ccd2_acisf09864_pi14-548_pass1_cl_src31_src.lc and ../../acisf09864/products/lightcurves/fullrun_ccd2_acisf09864_pi14-548_pass1_cl_src31_bgd.lc exist, delete to re-create
[Wed Oct 26 13:23:06 2011] 189.281
[Wed Oct 26 13:25:18 2011] Updating aperture counts using extracted products
[Wed Oct 26 13:25:18 2011] Error reading totcts from fullrun_ccd2_acisf09864_pi14-548_pass1_cl_src31_src.pi.gz
[Wed Oct 26 13:25:19 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct 26 13:25:19 2011] Using photon index=1.80, rate=0.000471, arf fullrun_ccd2_acisf09864_pi14-548_pass1_cl_src31.arf
[Wed Oct 26 13:25:19 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Oct 26 13:25:19 2011] Updating source flux to 7.3e-15
[Wed Oct 26 13:25:26 2011] Source 31 has fewer than 100.000000 counts, skipping spectral fitting