[Thu Oct 27 13:49:05 2011] Detection parameters:
  Position = (441.3, 952.8) = 10 42 58.11 -59 26 37.3
  Extent = 0.9" x 0.5", rotation angle = 121 degrees
  Source counts = 56.3 +/- 7.6
  Background counts = 1.7
  Rate = 0.002 +/- 0.0003

[Thu Oct 27 13:49:08 2011] Off-axis axis estimate = 4.64'
[Thu Oct 27 13:50:27 2011] Using EEF radius (= 1.04 ")to estimate initial spatial extent for simple fitting
[Thu Oct 27 13:50:27 2011] Initial guess for spatial extent in simple fitting = 1.04"
[Thu Oct 27 13:50:27 2011] source mask rpix=2.1, npix_max = 27, mask sum = 25, frac = 0.913
[Thu Oct 27 13:50:27 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 1.04"
[Thu Oct 27 13:50:28 2011] fullrun_ccd2_acisf09861_pi14-548_cl_pass0_src3.ximg exists
[Thu Oct 27 13:50:28 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf09861_pi14-548_cl_pass0_src3.csv
[Thu Oct 27 13:50:28 2011] fullrun_ccd2_acisf09861_pi14-548_cl_pass0_src3_1.ximg exists
[Thu Oct 27 13:50:28 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf09861_pi14-548_cl_pass0_src3.csv
[Thu Oct 27 13:50:28 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf09861_pi14-548_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf09861_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct 27 13:50:28 2011] fullrun_ccd2_acisf09861_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Thu Oct 27 13:50:28 2011] fullrun_ccd2_acisf09861_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Thu Oct 27 13:50:28 2011] Fit fullrun_ccd2_acisf09861_pi14-548_cl_pass0_tfrozen_src3 appears to have run properly
[Thu Oct 27 13:50:43 2011] Spatial fit model total counts = 56.500100, observed total counts = 59.000000
[Thu Oct 27 13:50:43 2011] Offset between fit and detection position for source 2 = 0.846788 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.846788 pixels
  Position = (442.2, 952.9) = 10 42 58.09 -59 26 37.5
  Extent = 0.9 (0.8-1.1)", rotation angle = 0
  Source counts = 56.5 +/- 7.5
  Background counts = 0.0
  Rate = 0.002 +/- 0.0003
[Thu Oct 27 13:50:43 2011] Vigneting correction estimate = 1.000000
[Thu Oct 27 13:50:43 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct 27 13:50:43 2011] Assessing source extent using major axis lower bound
[Thu Oct 27 13:50:43 2011] Source does appear to be extended
[Thu Oct 27 13:50:43 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct 27 13:51:15 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Oct 27 13:51:15 2011] Initial guess for spatial extent in simple fitting = 0.91"
[Thu Oct 27 13:51:15 2011] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.899
[Thu Oct 27 13:51:15 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 0.91"
[Thu Oct 27 13:51:15 2011] fullrun_ccd2_acisf09861_pi14-548_cl_pass1_src3.ximg exists
[Thu Oct 27 13:51:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf09861_pi14-548_cl_pass1_src3.csv
[Thu Oct 27 13:51:15 2011] fullrun_ccd2_acisf09861_pi14-548_cl_pass1_src3_1.ximg exists
[Thu Oct 27 13:51:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf09861_pi14-548_cl_pass1_src3.csv
[Thu Oct 27 13:51:15 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf09861_pi14-548_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf09861_pi14-548_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct 27 13:51:15 2011] fullrun_ccd2_acisf09861_pi14-548_cl_pass1_tfrozen_src3.ximg exists
[Thu Oct 27 13:51:15 2011] fullrun_ccd2_acisf09861_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists
[Thu Oct 27 13:51:15 2011] Fit fullrun_ccd2_acisf09861_pi14-548_cl_pass1_tfrozen_src3 appears to have run properly
[Thu Oct 27 13:51:28 2011] Spatial fit model total counts = 55.315000, observed total counts = 59.000000
[Thu Oct 27 13:51:28 2011] Offset between fit and detection position for source 2 = 0.145156 pixels
[Thu Oct 27 13:51:28 2011] 57.076956 total counts/ 0.004856 bgd. counts: snr = 819.028141
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.145156 pixels
  Position = (442.1, 952.8) = 10 42 58.09 -59 26 37.6
  Extent = 0.9 (0.7-1.0)", rotation angle = 0
  Source counts = 57.1 +/- 7.6
  Background counts = 0.0
  Rate = 0.002 +/- 0.0003
[Thu Oct 27 13:51:28 2011] Vigneting correction estimate = 1.000000
[Thu Oct 27 13:51:28 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct 27 13:51:28 2011] Assessing source extent using major axis lower bound
[Thu Oct 27 13:51:28 2011] Source does appear to be extended
[Thu Oct 27 13:51:28 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct 27 13:54:05 2011] Not overwriting source region fullrun_ccd2_acisf09861_pi14-548_pass1_cl_src2_src.reg
[Thu Oct 27 13:54:05 2011] Extracting stamp from image fullrun_ccd2_acisf09861_pi14-548_cl_sm2.00.img.gz, (400, 911) - (484, 994)
[Thu Oct 27 13:54:05 2011] Writing fullrun_ccd2_acisf09861_pi14-548_pass1_cl_src2.gif
[Thu Oct 27 13:54:12 2011] ../../acisf09861/products/events/fullrun_ccd2_acisf09861_pi14-548_pass1_cl_src2_src.evt and ../../acisf09861/products/events/fullrun_ccd2_acisf09861_pi14-548_pass1_cl_src2_bgd.evt exist, delete to re-create
[Thu Oct 27 13:54:12 2011] Size of ../../acisf09861/products/events/fullrun_ccd2_acisf09861_pi14-548_pass1_cl_src2_src.evt.gz[events] = 58 counts
[Thu Oct 27 13:54:12 2011] Mean chipx,y = (605.67, 866.21)
[Thu Oct 27 13:54:12 2011] Mean tdetx,y = (3927.21, 3480.33)
[Thu Oct 27 13:54:12 2011] chipx,y range = (588.00-623.00, 845.00-886.00)
[Thu Oct 27 13:54:12 2011] Size of ../../acisf09861/products/events/fullrun_ccd2_acisf09861_pi14-548_pass1_cl_src2_bgd.evt.gz[events] = 27 counts
[Thu Oct 27 13:54:12 2011] ../../acisf09861/products/images/fullrun_ccd2_acisf09861_pi14-548_pass1_cl_src2_src.img and ../../acisf09861/products/images/fullrun_ccd2_acisf09861_pi14-548_pass1_cl_src2_bgd.img exist, delete to re-create
[Thu Oct 27 13:54:12 2011] ../../acisf09861/products/spectra/fullrun_ccd2_acisf09861_pi14-548_pass1_cl_src2_src.pi and ../../acisf09861/products/spectra/fullrun_ccd2_acisf09861_pi14-548_pass1_cl_src2_bgd.pi exist, delete to re-create
[Thu Oct 27 13:54:12 2011] Not generating rmf since there are only 57 counts
[Thu Oct 27 13:54:15 2011] ../../acisf09861/products/lightcurves/fullrun_ccd2_acisf09861_pi14-548_pass1_cl_src2_src.lc and ../../acisf09861/products/lightcurves/fullrun_ccd2_acisf09861_pi14-548_pass1_cl_src2_bgd.lc exist, delete to re-create
[Thu Oct 27 13:55:33 2011] 181.996
[Thu Oct 27 13:58:08 2011] Updating aperture counts using extracted products
[Thu Oct 27 13:58:08 2011] Error reading totcts from fullrun_ccd2_acisf09861_pi14-548_pass1_cl_src2_src.pi.gz
[Thu Oct 27 13:58:09 2011] Calculating source flux in energy range 0.30-8.00
[Thu Oct 27 13:58:09 2011] Using photon index=1.80, rate=0.00203, arf fullrun_ccd2_acisf09861_pi14-548_pass1_cl_src2.arf
[Thu Oct 27 13:58:09 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Oct 27 13:58:09 2011] Updating source flux to 3.4e-14
[Thu Oct 27 13:58:20 2011] Source 2 has fewer than 100.000000 counts, skipping spectral fitting
[Thu Oct 27 13:58:21 2011] acisf09861/analysis//spectral/fullrun_ccd2_acisf09861_pi14-548_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete