[Sat Oct 1 18:50:10 2011] Detection parameters: Position = (352.5, 715.5) = 17 51 13.60 -29 31 9.6 Extent = 0.5" x 0.5", rotation angle = 90 degrees Source counts = 21.7 +/- 4.8 Background counts = 1.3 Rate = 0.001 +/- 0.0002 [Sat Oct 1 18:50:11 2011] Off-axis axis estimate = 5.80' [Sat Oct 1 18:51:09 2011] Using EEF radius (= 1.53 ")to estimate initial spatial extent for simple fitting [Sat Oct 1 18:51:09 2011] Initial guess for spatial extent in simple fitting = 1.53" [Sat Oct 1 18:51:09 2011] source mask rpix=3.1, npix_max = 52, mask sum = 35, frac = 0.671 [Sat Oct 1 18:51:09 2011] Giving source the simple spatial ID 2 for pass 0, mean size = 1.53" [Sat Oct 1 18:51:09 2011] fullrun_ccd1_acisf09854_pi14-548_cl_pass0_src2.ximg exists [Sat Oct 1 18:51:09 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf09854_pi14-548_cl_pass0_src2.csv [Sat Oct 1 18:51:09 2011] fullrun_ccd1_acisf09854_pi14-548_cl_pass0_src2_1.ximg exists [Sat Oct 1 18:51:09 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf09854_pi14-548_cl_pass0_src2.csv [Sat Oct 1 18:51:09 2011] It looks like the fit did not converge You should probably delete fullrun_ccd1_acisf09854_pi14-548_cl_pass0_src2_1.ximg Either tweak this fit manually starting from fullrun_ccd1_acisf09854_pi14-548_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Oct 1 18:51:09 2011] fullrun_ccd1_acisf09854_pi14-548_cl_pass0_tfrozen_src2.ximg exists [Sat Oct 1 18:51:09 2011] fullrun_ccd1_acisf09854_pi14-548_cl_pass0_tfrozen_src2_1.ximg exists [Sat Oct 1 18:51:09 2011] Fit fullrun_ccd1_acisf09854_pi14-548_cl_pass0_tfrozen_src2 appears to have run properly [Sat Oct 1 18:51:18 2011] Spatial fit model total counts = 109.093000, observed total counts = 115.000000 [Sat Oct 1 18:51:18 2011] Offset between fit and detection position for source 2 = 2.572352 pixels [Sat Oct 1 18:51:18 2011] 110.234400 total counts/ 5.650400 bgd. counts: snr = 43.997262 Spatial fit parameters: Offset between fit and detection position for source 2 = 2.572352 pixels Position = (350.0, 715.1) = 17 51 13.71 -29 31 10.1 Extent = 1.3 (1.2-1.5)", rotation angle = 0 Source counts = 104.6 +/- 10.5 Background counts = 5.7 Rate = 0.005 +/- 0.0005 [Sat Oct 1 18:51:18 2011] Vigneting correction estimate = 1.000000 [Sat Oct 1 18:51:18 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat Oct 1 18:51:18 2011] Assessing source extent using major axis lower bound [Sat Oct 1 18:51:18 2011] Source does appear to be extended [Sat Oct 1 18:51:18 2011] Computing asymmetry using major and minor axis, asym = 1.00 [Sat Oct 1 18:51:41 2011] Using previous fit value to estimate initial spatial extent for simple fitting [Sat Oct 1 18:51:41 2011] Initial guess for spatial extent in simple fitting = 1.32" [Sat Oct 1 18:51:41 2011] source mask rpix=2.7, npix_max = 40, mask sum = 24, frac = 0.594 [Sat Oct 1 18:51:41 2011] Giving source the simple spatial ID 2 for pass 1, mean size = 1.32" [Sat Oct 1 18:51:42 2011] fullrun_ccd1_acisf09854_pi14-548_cl_pass1_src2.ximg exists [Sat Oct 1 18:51:42 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf09854_pi14-548_cl_pass1_src2.csv [Sat Oct 1 18:51:42 2011] fullrun_ccd1_acisf09854_pi14-548_cl_pass1_src2_1.ximg exists [Sat Oct 1 18:51:42 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf09854_pi14-548_cl_pass1_src2.csv [Sat Oct 1 18:51:42 2011] It looks like the fit did not converge You should probably delete fullrun_ccd1_acisf09854_pi14-548_cl_pass1_src2_1.ximg Either tweak this fit manually starting from fullrun_ccd1_acisf09854_pi14-548_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Oct 1 18:51:42 2011] fullrun_ccd1_acisf09854_pi14-548_cl_pass1_tfrozen_src2.ximg exists [Sat Oct 1 18:51:42 2011] fullrun_ccd1_acisf09854_pi14-548_cl_pass1_tfrozen_src2_1.ximg exists [Sat Oct 1 18:51:42 2011] Fit fullrun_ccd1_acisf09854_pi14-548_cl_pass1_tfrozen_src2 appears to have run properly [Sat Oct 1 18:51:50 2011] Spatial fit model total counts = 110.539000, observed total counts = 112.000000 [Sat Oct 1 18:51:50 2011] Offset between fit and detection position for source 2 = 0.401654 pixels [Sat Oct 1 18:51:50 2011] 109.750050 total counts/ 6.670050 bgd. counts: snr = 39.912586 Spatial fit parameters: Offset between fit and detection position for source 2 = 0.401654 pixels Position = (350.3, 715.2) = 17 51 13.70 -29 31 10.0 Extent = 1.2 (0.9-1.5)", rotation angle = 0 Source counts = 103.1 +/- 10.5 Background counts = 6.7 Rate = 0.005 +/- 0.0005 [Sat Oct 1 18:51:50 2011] Vigneting correction estimate = 1.000000 [Sat Oct 1 18:51:50 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat Oct 1 18:51:50 2011] Assessing source extent using major axis lower bound [Sat Oct 1 18:51:50 2011] Source does appear to be extended [Sat Oct 1 18:51:50 2011] Computing asymmetry using major and minor axis, asym = 1.00 [Sat Oct 1 18:52:31 2011] Not overwriting source region fullrun_ccd1_acisf09854_pi14-548_pass1_cl_src2_src.reg [Sat Oct 1 18:52:31 2011] Extracting stamp from image fullrun_ccd1_acisf09854_pi14-548_cl_sm2.00.img.gz, (294, 659) - (407, 771) [Sat Oct 1 18:52:31 2011] Writing fullrun_ccd1_acisf09854_pi14-548_pass1_cl_src2.gif [Sat Oct 1 18:52:38 2011] ../../acisf09854/products/events/fullrun_ccd1_acisf09854_pi14-548_pass1_cl_src2_src.evt and ../../acisf09854/products/events/fullrun_ccd1_acisf09854_pi14-548_pass1_cl_src2_bgd.evt exist, delete to re-create [Sat Oct 1 18:52:39 2011] Size of ../../acisf09854/products/events/fullrun_ccd1_acisf09854_pi14-548_pass1_cl_src2_src.evt.gz[events] = 119 counts [Sat Oct 1 18:52:39 2011] Mean chipx,y = (258.00, 408.16) [Sat Oct 1 18:52:39 2011] Mean tdetx,y = (4723.84, 4365.00) [Sat Oct 1 18:52:39 2011] chipx,y range = (235.00-279.00, 390.00-426.00) [Sat Oct 1 18:52:39 2011] Size of ../../acisf09854/products/events/fullrun_ccd1_acisf09854_pi14-548_pass1_cl_src2_bgd.evt.gz[events] = 44 counts [Sat Oct 1 18:52:39 2011] ../../acisf09854/products/images/fullrun_ccd1_acisf09854_pi14-548_pass1_cl_src2_src.img and ../../acisf09854/products/images/fullrun_ccd1_acisf09854_pi14-548_pass1_cl_src2_bgd.img exist, delete to re-create [Sat Oct 1 18:52:39 2011] ../../acisf09854/products/spectra/fullrun_ccd1_acisf09854_pi14-548_pass1_cl_src2_src.pi and ../../acisf09854/products/spectra/fullrun_ccd1_acisf09854_pi14-548_pass1_cl_src2_bgd.pi exist, delete to re-create [Sat Oct 1 18:52:42 2011] ../../acisf09854/products/lightcurves/fullrun_ccd1_acisf09854_pi14-548_pass1_cl_src2_src.lc and ../../acisf09854/products/lightcurves/fullrun_ccd1_acisf09854_pi14-548_pass1_cl_src2_bgd.lc exist, delete to re-create [Sat Oct 1 18:53:24 2011] Keeping rmf generated by specextract [Sat Oct 1 18:53:24 2011] 181.3 [Sat Oct 1 18:56:24 2011] Updating aperture counts using extracted products [Sat Oct 1 18:56:24 2011] Error reading totcts from fullrun_ccd1_acisf09854_pi14-548_pass1_cl_src2_src.pi.gz [Sat Oct 1 18:56:24 2011] Calculating source flux in energy range 0.30-8.00 [Sat Oct 1 18:56:24 2011] Using photon index=1.80, rate=0.00452, arf fullrun_ccd1_acisf09854_pi14-548_pass1_cl_src2.arf [Sat Oct 1 18:56:24 2011] Assuming count rate is from the 0.20-8.00 bandpass [Sat Oct 1 18:56:24 2011] Updating source flux to 6.7e-14 [Sat Oct 1 18:56:33 2011] Reading fit data from acisf09854/analysis//spectral/fullrun_ccd1_acisf09854_pi14-548_pass1_cl_src2_pl.csv [Sat Oct 1 18:56:33 2011] Spectral fit parameter nH value = 3.3373e+22 [Sat Oct 1 18:56:33 2011] Spectral fit parameter PhoIndex value = 1.81845 [Sat Oct 1 18:56:33 2011] Failed to get F(0.3-8.0) from acisf09854/analysis//spectral/fullrun_ccd1_acisf09854_pi14-548_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected [Sat Oct 1 18:56:33 2011] Calculating source flux in energy range 0.30-8.00 [Sat Oct 1 18:56:33 2011] Using Nh = 3.3e+22, photon index=1.82, rate=0.00452, arf fullrun_ccd1_acisf09854_pi14-548_pass1_cl_src2.arf [Sat Oct 1 18:56:33 2011] Assuming count rate is from the 0.20-8.00 bandpass [Sat Oct 1 18:56:33 2011] Updating source flux to 1e-13