[Fri Sep 30 15:02:58 2011] Detection parameters:
  Position = (643.5, 1103.6) = 10 45 35.74 -60 24 31.6
  Extent = 0.5" x 0.5", rotation angle = 51 degrees
  Source counts = 35.6 +/- 6.1
  Background counts = 1.4
  Rate = 0.001 +/- 0.0002

[Fri Sep 30 15:03:01 2011] Off-axis axis estimate = 5.92'
[Fri Sep 30 15:04:06 2011] Using EEF radius (= 1.59 ")to estimate initial spatial extent for simple fitting
[Fri Sep 30 15:04:06 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Sep 30 15:04:06 2011] Initial guess for spatial extent in simple fitting = 1.59"
[Fri Sep 30 15:04:06 2011] source mask rpix=3.2, npix_max = 55, mask sum = 39, frac = 0.700
[Fri Sep 30 15:04:06 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 1.59"
[Fri Sep 30 15:04:07 2011] fullrun_ccd2_acisf09849_pi14-548_cl_pass0_src1.ximg exists
[Fri Sep 30 15:04:07 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf09849_pi14-548_cl_pass0_src1.csv
[Fri Sep 30 15:04:07 2011] fullrun_ccd2_acisf09849_pi14-548_cl_pass0_src1_1.ximg exists
[Fri Sep 30 15:04:07 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf09849_pi14-548_cl_pass0_src1.csv
[Fri Sep 30 15:04:07 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf09849_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf09849_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 15:04:07 2011] fullrun_ccd2_acisf09849_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Fri Sep 30 15:04:07 2011] fullrun_ccd2_acisf09849_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Sep 30 15:04:07 2011] Fit fullrun_ccd2_acisf09849_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Sep 30 15:04:16 2011] Spatial fit model total counts = 67.137400, observed total counts = 64.000000
[Fri Sep 30 15:04:16 2011] Offset between fit and detection position for source 1 = 0.987484 pixels
[Fri Sep 30 15:04:16 2011] 66.901200 total counts/ 11.488900 bgd. counts: snr = 16.348087
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.987484 pixels
  Position = (642.8, 1104.3) = 10 45 35.82 -60 24 31.5
  Extent = 1.3 (1.0-1.7)", rotation angle = 0
  Source counts = 55.4 +/- 8.2
  Background counts = 11.5
  Rate = 0.002 +/- 0.0003
[Fri Sep 30 15:04:16 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 15:04:16 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 15:04:16 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 15:04:16 2011] Source does appear to be extended
[Fri Sep 30 15:04:16 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 15:04:42 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Sep 30 15:04:42 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Sep 30 15:04:42 2011] Initial guess for spatial extent in simple fitting = 1.31"
[Fri Sep 30 15:04:42 2011] source mask rpix=2.7, npix_max = 40, mask sum = 26, frac = 0.648
[Fri Sep 30 15:04:42 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 1.31"
[Fri Sep 30 15:04:44 2011] fullrun_ccd2_acisf09849_pi14-548_cl_pass1_src1.ximg exists
[Fri Sep 30 15:04:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf09849_pi14-548_cl_pass1_src1.csv
[Fri Sep 30 15:04:44 2011] fullrun_ccd2_acisf09849_pi14-548_cl_pass1_src1_1.ximg exists
[Fri Sep 30 15:04:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf09849_pi14-548_cl_pass1_src1.csv
[Fri Sep 30 15:04:44 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf09849_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf09849_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 15:04:44 2011] fullrun_ccd2_acisf09849_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Fri Sep 30 15:04:44 2011] fullrun_ccd2_acisf09849_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Sep 30 15:04:44 2011] Fit fullrun_ccd2_acisf09849_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Sep 30 15:04:54 2011] Spatial fit model total counts = 65.377200, observed total counts = 61.000000
[Fri Sep 30 15:04:54 2011] Offset between fit and detection position for source 1 = 0.288773 pixels
[Fri Sep 30 15:04:54 2011] 64.671800 total counts/ 11.391400 bgd. counts: snr = 15.786248
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.288773 pixels
  Position = (643.0, 1104.5) = 10 45 35.81 -60 24 31.4
  Extent = 1.2 (0.9-1.6)", rotation angle = 0
  Source counts = 53.3 +/- 8.0
  Background counts = 11.4
  Rate = 0.002 +/- 0.0003
[Fri Sep 30 15:04:54 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 15:04:54 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 15:04:54 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 15:04:54 2011] Source does appear to be extended
[Fri Sep 30 15:04:54 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 15:06:53 2011] Not overwriting source region fullrun_ccd2_acisf09849_pi14-548_pass1_cl_src1_src.reg
[Fri Sep 30 15:06:53 2011] Extracting stamp from image fullrun_ccd2_acisf09849_pi14-548_cl_sm2.00.img.gz, (586, 1048) - (699, 1161)
[Fri Sep 30 15:06:53 2011] Writing fullrun_ccd2_acisf09849_pi14-548_pass1_cl_src1.gif
[Fri Sep 30 15:06:57 2011] ../../acisf09849/products/events/fullrun_ccd2_acisf09849_pi14-548_pass1_cl_src1_src.evt and ../../acisf09849/products/events/fullrun_ccd2_acisf09849_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Fri Sep 30 15:06:57 2011] Size of ../../acisf09849/products/events/fullrun_ccd2_acisf09849_pi14-548_pass1_cl_src1_src.evt.gz[events] = 58 counts
[Fri Sep 30 15:06:57 2011] Mean chipx,y = (762.81, 851.95)
[Fri Sep 30 15:06:57 2011] Mean tdetx,y = (3912.95, 3323.19)
[Fri Sep 30 15:06:57 2011] chipx,y range = (749.00-787.00, 826.00-873.00)
[Fri Sep 30 15:06:57 2011] Size of ../../acisf09849/products/events/fullrun_ccd2_acisf09849_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 40 counts
[Fri Sep 30 15:06:57 2011] ../../acisf09849/products/images/fullrun_ccd2_acisf09849_pi14-548_pass1_cl_src1_src.img and ../../acisf09849/products/images/fullrun_ccd2_acisf09849_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Fri Sep 30 15:06:57 2011] ../../acisf09849/products/spectra/fullrun_ccd2_acisf09849_pi14-548_pass1_cl_src1_src.pi and ../../acisf09849/products/spectra/fullrun_ccd2_acisf09849_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Fri Sep 30 15:06:57 2011] Not generating rmf since there are only 53 counts
[Fri Sep 30 15:07:00 2011] ../../acisf09849/products/lightcurves/fullrun_ccd2_acisf09849_pi14-548_pass1_cl_src1_src.lc and ../../acisf09849/products/lightcurves/fullrun_ccd2_acisf09849_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Fri Sep 30 15:08:26 2011] 168.193
[Fri Sep 30 15:10:14 2011] Updating aperture counts using extracted products
[Fri Sep 30 15:10:14 2011] Error reading totcts from fullrun_ccd2_acisf09849_pi14-548_pass1_cl_src1_src.pi.gz
[Fri Sep 30 15:10:14 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 30 15:10:14 2011] Using photon index=1.80, rate=0.00187, arf fullrun_ccd2_acisf09849_pi14-548_pass1_cl_src1.arf
[Fri Sep 30 15:10:14 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Sep 30 15:10:14 2011] Updating source flux to 3.4e-14
[Fri Sep 30 15:10:23 2011] Source 1 has fewer than 100.000000 counts, skipping spectral fitting
[Fri Sep 30 15:10:24 2011] acisf09849/analysis//spectral/fullrun_ccd2_acisf09849_pi14-548_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete