[Sat Oct  1 01:41:06 2011] Detection parameters:
  Position = (170.2, 858.2) = 14 20 52.42 52 56 22.3
  Extent = 1.8" x 1.2", rotation angle = 156 degrees
  Source counts = 178.1 +/- 13.6
  Background counts = 6.9
  Rate = 0.01 +/- 0.001

[Sat Oct  1 01:41:06 2011] Off-axis axis estimate = 7.19'
[Sat Oct  1 01:41:47 2011] Using EEF radius (= 2.29 ")to estimate initial spatial extent for simple fitting
[Sat Oct  1 01:41:47 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Oct  1 01:41:47 2011] Initial guess for spatial extent in simple fitting = 2.29"
[Sat Oct  1 01:41:47 2011] source mask rpix=4.7, npix_max = 106, mask sum = 100, frac = 0.938
[Sat Oct  1 01:41:47 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 2.29"
[Sat Oct  1 01:41:47 2011] fullrun_ccd3_acisf09843_pi14-548_cl_pass0_src1.ximg exists
[Sat Oct  1 01:41:47 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf09843_pi14-548_cl_pass0_src1.csv
[Sat Oct  1 01:41:47 2011] fullrun_ccd3_acisf09843_pi14-548_cl_pass0_src1_1.ximg exists
[Sat Oct  1 01:41:47 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf09843_pi14-548_cl_pass0_src1.csv
[Sat Oct  1 01:41:47 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf09843_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf09843_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct  1 01:41:47 2011] fullrun_ccd3_acisf09843_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Sat Oct  1 01:41:47 2011] fullrun_ccd3_acisf09843_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Oct  1 01:41:47 2011] Fit fullrun_ccd3_acisf09843_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Sat Oct  1 01:41:51 2011] Spatial fit model total counts = 190.215000, observed total counts = 188.000000
[Sat Oct  1 01:41:51 2011] Offset between fit and detection position for source 7 = 0.603439 pixels
[Sat Oct  1 01:41:51 2011] 190.723680 total counts/ 6.827680 bgd. counts: snr = 70.377803
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.603439 pixels
  Position = (170.6, 858.6) = 14 20 52.42 52 56 22.3
  Extent = 2.0 (1.8-2.2)", rotation angle = 0
  Source counts = 183.9 +/- 13.8
  Background counts = 6.8
  Rate = 0.01 +/- 0.001
[Sat Oct  1 01:41:51 2011] Vigneting correction estimate = 1.000000
[Sat Oct  1 01:41:51 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct  1 01:41:51 2011] Assessing source extent using major axis lower bound
[Sat Oct  1 01:41:51 2011] Source does appear to be extended
[Sat Oct  1 01:41:51 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct  1 01:42:11 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Oct  1 01:42:11 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Oct  1 01:42:11 2011] Initial guess for spatial extent in simple fitting = 1.99"
[Sat Oct  1 01:42:11 2011] source mask rpix=4.0, npix_max = 82, mask sum = 81, frac = 0.981
[Sat Oct  1 01:42:11 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 1.99"
[Sat Oct  1 01:42:11 2011] fullrun_ccd3_acisf09843_pi14-548_cl_pass1_src1.ximg exists
[Sat Oct  1 01:42:11 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf09843_pi14-548_cl_pass1_src1.csv
[Sat Oct  1 01:42:11 2011] fullrun_ccd3_acisf09843_pi14-548_cl_pass1_src1_1.ximg exists
[Sat Oct  1 01:42:11 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf09843_pi14-548_cl_pass1_src1.csv
[Sat Oct  1 01:42:11 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf09843_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf09843_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct  1 01:42:11 2011] fullrun_ccd3_acisf09843_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Sat Oct  1 01:42:11 2011] fullrun_ccd3_acisf09843_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Oct  1 01:42:11 2011] Fit fullrun_ccd3_acisf09843_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Sat Oct  1 01:42:17 2011] Spatial fit model total counts = 186.284000, observed total counts = 187.000000
[Sat Oct  1 01:42:17 2011] Offset between fit and detection position for source 7 = 0.050868 pixels
[Sat Oct  1 01:42:17 2011] 186.917560 total counts/ 8.688560 bgd. counts: snr = 60.465057
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.050868 pixels
  Position = (170.6, 858.6) = 14 20 52.42 52 56 22.3
  Extent = 2.0 (1.7-2.2)", rotation angle = 0
  Source counts = 178.2 +/- 13.7
  Background counts = 8.7
  Rate = 0.01 +/- 0.001
[Sat Oct  1 01:42:17 2011] Vigneting correction estimate = 1.000000
[Sat Oct  1 01:42:17 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct  1 01:42:17 2011] Assessing source extent using major axis lower bound
[Sat Oct  1 01:42:17 2011] Source does appear to be extended
[Sat Oct  1 01:42:17 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct  1 01:43:58 2011] Not overwriting source region fullrun_ccd3_acisf09843_pi14-548_pass1_cl_src7_src.reg
[Sat Oct  1 01:43:58 2011] Extracting stamp from image fullrun_ccd3_acisf09843_pi14-548_cl_sm2.00.img.gz, (81, 769) - (260, 948)
[Sat Oct  1 01:43:58 2011] Writing fullrun_ccd3_acisf09843_pi14-548_pass1_cl_src7.gif
[Sat Oct  1 01:43:59 2011] ../../acisf09843/products/events/fullrun_ccd3_acisf09843_pi14-548_pass1_cl_src7_src.evt and ../../acisf09843/products/events/fullrun_ccd3_acisf09843_pi14-548_pass1_cl_src7_bgd.evt exist, delete to re-create
[Sat Oct  1 01:43:59 2011] Size of ../../acisf09843/products/events/fullrun_ccd3_acisf09843_pi14-548_pass1_cl_src7_src.evt.gz[events] = 185 counts
[Sat Oct  1 01:43:59 2011] Mean chipx,y = (908.39, 143.37)
[Sat Oct  1 01:43:59 2011] Mean tdetx,y = (4988.63, 3969.39)
[Sat Oct  1 01:43:59 2011] chipx,y range = (886.00-934.00, 120.00-166.00)
[Sat Oct  1 01:43:59 2011] Size of ../../acisf09843/products/events/fullrun_ccd3_acisf09843_pi14-548_pass1_cl_src7_bgd.evt.gz[events] = 33 counts
[Sat Oct  1 01:43:59 2011] ../../acisf09843/products/images/fullrun_ccd3_acisf09843_pi14-548_pass1_cl_src7_src.img and ../../acisf09843/products/images/fullrun_ccd3_acisf09843_pi14-548_pass1_cl_src7_bgd.img exist, delete to re-create
[Sat Oct  1 01:43:59 2011] ../../acisf09843/products/spectra/fullrun_ccd3_acisf09843_pi14-548_pass1_cl_src7_src.pi and ../../acisf09843/products/spectra/fullrun_ccd3_acisf09843_pi14-548_pass1_cl_src7_bgd.pi exist, delete to re-create
[Sat Oct  1 01:44:02 2011] ../../acisf09843/products/lightcurves/fullrun_ccd3_acisf09843_pi14-548_pass1_cl_src7_src.lc and ../../acisf09843/products/lightcurves/fullrun_ccd3_acisf09843_pi14-548_pass1_cl_src7_bgd.lc exist, delete to re-create
[Sat Oct  1 01:44:34 2011] Keeping rmf generated by specextract
[Sat Oct  1 01:44:34 2011] 178.393
[Sat Oct  1 01:44:37 2011] Updating aperture counts using extracted products
[Sat Oct  1 01:44:37 2011] Error reading totcts from fullrun_ccd3_acisf09843_pi14-548_pass1_cl_src7_src.pi.gz
[Sat Oct  1 01:44:37 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct  1 01:44:37 2011] Using photon index=1.80, rate=0.0132, arf fullrun_ccd3_acisf09843_pi14-548_pass1_cl_src7.arf
[Sat Oct  1 01:44:37 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct  1 01:44:37 2011] Updating source flux to 1.8e-13
[Sat Oct  1 01:44:49 2011] Reading fit data from acisf09843/analysis//spectral/fullrun_ccd3_acisf09843_pi14-548_pass1_cl_src7_pl.csv
[Sat Oct  1 01:44:49 2011] Spectral fit parameter nH value = 4.60582e+16
[Sat Oct  1 01:44:49 2011] Spectral fit parameter PhoIndex value = 2.13848
[Sat Oct  1 01:44:49 2011] Failed to get F(0.3-8.0) from acisf09843/analysis//spectral/fullrun_ccd3_acisf09843_pi14-548_pass1_cl_src7_pl.csv, possibly due to different flux energy range selected
[Sat Oct  1 01:44:49 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct  1 01:44:49 2011] Using Nh = 4.6e+16, photon index=2.14, rate=0.0132, arf fullrun_ccd3_acisf09843_pi14-548_pass1_cl_src7.arf
[Sat Oct  1 01:44:49 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct  1 01:44:49 2011] Updating source flux to 1.8e-13