[Fri Oct  7 15:24:03 2011] Detection parameters:
  Position = (937.1, 1005.6) = 10 43 21.58 -60 15 26.6
  Extent = 0.5" x 0.5", rotation angle = 29 degrees
  Source counts = 165.0 +/- 12.9
  Background counts = 1.0
  Rate = 0.008 +/- 0.0007

[Fri Oct  7 15:24:04 2011] Off-axis axis estimate = 1.39'
[Fri Oct  7 15:25:17 2011] Using EEF radius (= 0.39 ")to estimate initial spatial extent for simple fitting
[Fri Oct  7 15:25:17 2011] Initial guess for spatial extent in simple fitting = 0.39"
[Fri Oct  7 15:25:17 2011] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.905
[Fri Oct  7 15:25:17 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 0.39"
[Fri Oct  7 15:25:18 2011] fullrun_ccd0_acisf09830_pi14-548_cl_pass0_src1.ximg exists
[Fri Oct  7 15:25:18 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf09830_pi14-548_cl_pass0_src1.csv
[Fri Oct  7 15:25:18 2011] fullrun_ccd0_acisf09830_pi14-548_cl_pass0_src1_1.ximg exists
[Fri Oct  7 15:25:18 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf09830_pi14-548_cl_pass0_src1.csv
[Fri Oct  7 15:25:18 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf09830_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf09830_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 15:25:18 2011] fullrun_ccd0_acisf09830_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Fri Oct  7 15:25:18 2011] fullrun_ccd0_acisf09830_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Oct  7 15:25:18 2011] Fit fullrun_ccd0_acisf09830_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Oct  7 15:25:28 2011] Spatial fit model total counts = 165.518000, observed total counts = 166.000000
[Fri Oct  7 15:25:28 2011] Offset between fit and detection position for source 1 = 0.703970 pixels
[Fri Oct  7 15:25:28 2011] 165.145190 total counts/ 2.615190 bgd. counts: snr = 100.503668
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.703970 pixels
  Position = (937.6, 1006.1) = 10 43 21.58 -60 15 26.6
  Extent = 0.4 (0.4-0.5)", rotation angle = 0
  Source counts = 162.5 +/- 12.9
  Background counts = 2.6
  Rate = 0.008 +/- 0.0006
[Fri Oct  7 15:25:28 2011] Vigneting correction estimate = 1.000000
[Fri Oct  7 15:25:28 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct  7 15:25:28 2011] Assessing source extent using major axis lower bound
[Fri Oct  7 15:25:28 2011] Source does appear to be extended
[Fri Oct  7 15:25:28 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct  7 15:26:00 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct  7 15:26:00 2011] Initial guess for spatial extent in simple fitting = 0.43"
[Fri Oct  7 15:26:00 2011] source mask rpix=0.9, npix_max = 7, mask sum = 6, frac = 0.784
[Fri Oct  7 15:26:00 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 0.43"
[Fri Oct  7 15:26:03 2011] fullrun_ccd0_acisf09830_pi14-548_cl_pass1_src1.ximg exists
[Fri Oct  7 15:26:03 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf09830_pi14-548_cl_pass1_src1.csv
[Fri Oct  7 15:26:03 2011] fullrun_ccd0_acisf09830_pi14-548_cl_pass1_src1_1.ximg exists
[Fri Oct  7 15:26:03 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf09830_pi14-548_cl_pass1_src1.csv
[Fri Oct  7 15:26:03 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf09830_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf09830_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 15:26:04 2011] fullrun_ccd0_acisf09830_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Fri Oct  7 15:26:04 2011] fullrun_ccd0_acisf09830_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Oct  7 15:26:04 2011] Fit fullrun_ccd0_acisf09830_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Oct  7 15:26:18 2011] Spatial fit model total counts = 164.988000, observed total counts = 166.000000
[Fri Oct  7 15:26:18 2011] Offset between fit and detection position for source 1 = 0.002681 pixels
[Fri Oct  7 15:26:18 2011] 164.217510 total counts/ 1.628510 bgd. counts: snr = 127.407779
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.002681 pixels
  Position = (937.6, 1006.1) = 10 43 21.58 -60 15 26.6
  Extent = 0.4 (0.4-0.5)", rotation angle = 0
  Source counts = 162.6 +/- 12.8
  Background counts = 1.6
  Rate = 0.008 +/- 0.0006
[Fri Oct  7 15:26:18 2011] Vigneting correction estimate = 1.000000
[Fri Oct  7 15:26:18 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct  7 15:26:18 2011] Assessing source extent using major axis lower bound
[Fri Oct  7 15:26:18 2011] Source does appear to be extended
[Fri Oct  7 15:26:18 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct  7 15:26:43 2011] Not overwriting source region fullrun_ccd0_acisf09830_pi14-548_pass1_cl_src1_src.reg
[Fri Oct  7 15:26:43 2011] Extracting stamp from image fullrun_ccd0_acisf09830_pi14-548_cl_sm2.00.img.gz, (918, 986) - (957, 1026)
[Fri Oct  7 15:26:43 2011] Writing fullrun_ccd0_acisf09830_pi14-548_pass1_cl_src1.gif
[Fri Oct  7 15:26:52 2011] ../../acisf09830/products/events/fullrun_ccd0_acisf09830_pi14-548_pass1_cl_src1_src.evt and ../../acisf09830/products/events/fullrun_ccd0_acisf09830_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Fri Oct  7 15:26:52 2011] Size of ../../acisf09830/products/events/fullrun_ccd0_acisf09830_pi14-548_pass1_cl_src1_src.evt.gz[events] = 162 counts
[Fri Oct  7 15:26:52 2011] Mean chipx,y = (996.30, 926.20)
[Fri Oct  7 15:26:52 2011] Mean tdetx,y = (3987.20, 4135.70)
[Fri Oct  7 15:26:52 2011] chipx,y range = (984.00-1019.00, 908.00-944.00)
[Fri Oct  7 15:26:52 2011] Size of ../../acisf09830/products/events/fullrun_ccd0_acisf09830_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 7 counts
[Fri Oct  7 15:26:52 2011] ../../acisf09830/products/images/fullrun_ccd0_acisf09830_pi14-548_pass1_cl_src1_src.img and ../../acisf09830/products/images/fullrun_ccd0_acisf09830_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Fri Oct  7 15:26:52 2011] ../../acisf09830/products/spectra/fullrun_ccd0_acisf09830_pi14-548_pass1_cl_src1_src.pi and ../../acisf09830/products/spectra/fullrun_ccd0_acisf09830_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Fri Oct  7 15:26:55 2011] ../../acisf09830/products/lightcurves/fullrun_ccd0_acisf09830_pi14-548_pass1_cl_src1_src.lc and ../../acisf09830/products/lightcurves/fullrun_ccd0_acisf09830_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Fri Oct  7 15:27:48 2011] Keeping rmf generated by specextract
[Fri Oct  7 15:27:48 2011] 203.177
[Fri Oct  7 15:32:21 2011] Updating aperture counts using extracted products
[Fri Oct  7 15:32:21 2011] Error reading totcts from fullrun_ccd0_acisf09830_pi14-548_pass1_cl_src1_src.pi.gz
[Fri Oct  7 15:32:21 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct  7 15:32:21 2011] Using photon index=1.80, rate=0.00822, arf fullrun_ccd0_acisf09830_pi14-548_pass1_cl_src1.arf
[Fri Oct  7 15:32:21 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct  7 15:32:21 2011] Updating source flux to 1.3e-13
[Fri Oct  7 15:32:40 2011] Reading fit data from acisf09830/analysis//spectral/fullrun_ccd0_acisf09830_pi14-548_pass1_cl_src1_pl.csv
[Fri Oct  7 15:32:40 2011] Spectral fit parameter nH value = 2.45952e+15
[Fri Oct  7 15:32:40 2011] Spectral fit parameter PhoIndex value = 1.75599
[Fri Oct  7 15:32:40 2011] Failed to get F(0.3-8.0) from acisf09830/analysis//spectral/fullrun_ccd0_acisf09830_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Fri Oct  7 15:32:40 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct  7 15:32:40 2011] Using Nh = 2.5e+15, photon index=1.76, rate=0.00822, arf fullrun_ccd0_acisf09830_pi14-548_pass1_cl_src1.arf
[Fri Oct  7 15:32:40 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct  7 15:32:40 2011] Updating source flux to 9.6e-14