[Sun Sep 25 15:23:32 2011] Detection parameters:
  Position = (753.9, 319.2) = 10 44 38.11 -60 9 57.1
  Extent = 0.9" x 0.5", rotation angle = 136 degrees
  Source counts = 15.1 +/- 4.0
  Background counts = 0.9
  Rate = 0.0008 +/- 0.0002

[Sun Sep 25 15:23:33 2011] Off-axis axis estimate = 5.47'
[Sun Sep 25 15:24:46 2011] Using EEF radius (= 1.38 ")to estimate initial spatial extent for simple fitting
[Sun Sep 25 15:24:46 2011] Initial guess for spatial extent in simple fitting = 1.38"
[Sun Sep 25 15:24:46 2011] source mask rpix=2.8, npix_max = 43, mask sum = 36, frac = 0.827
[Sun Sep 25 15:24:46 2011] Giving source the simple spatial ID 14 for pass 0, mean size = 1.38"
[Sun Sep 25 15:24:47 2011] fullrun_ccd3_acisf09817_pi14-548_cl_pass0_src14.ximg exists
[Sun Sep 25 15:24:47 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf09817_pi14-548_cl_pass0_src14.csv
[Sun Sep 25 15:24:47 2011] fullrun_ccd3_acisf09817_pi14-548_cl_pass0_src14_1.ximg exists
[Sun Sep 25 15:24:47 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf09817_pi14-548_cl_pass0_src14.csv
[Sun Sep 25 15:24:47 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf09817_pi14-548_cl_pass0_src14_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf09817_pi14-548_cl_pass0_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep 25 15:24:48 2011] fullrun_ccd3_acisf09817_pi14-548_cl_pass0_tfrozen_src14.ximg exists
[Sun Sep 25 15:24:48 2011] fullrun_ccd3_acisf09817_pi14-548_cl_pass0_tfrozen_src14_1.ximg exists
[Sun Sep 25 15:24:48 2011] Fit fullrun_ccd3_acisf09817_pi14-548_cl_pass0_tfrozen_src14 appears to have run properly
[Sun Sep 25 15:25:04 2011] Spatial fit model total counts = 18.097400, observed total counts = 19.000000
[Sun Sep 25 15:25:04 2011] Offset between fit and detection position for source 13 = 0.819359 pixels
[Sun Sep 25 15:25:04 2011] 17.843890 total counts/ 1.813090 bgd. counts: snr = 11.905442
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 0.819359 pixels
  Position = (754.7, 319.4) = 10 44 38.10 -60 9 57.3
  Extent = 1.0 (0.5-1.5)", rotation angle = 0
  Source counts = 16.0 +/- 4.2
  Background counts = 1.8
  Rate = 0.0008 +/- 0.0002
[Sun Sep 25 15:25:04 2011] Vigneting correction estimate = 1.000000
[Sun Sep 25 15:25:04 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Sep 25 15:25:04 2011] Assessing source extent using major axis lower bound
[Sun Sep 25 15:25:04 2011] Source does appear to be extended
[Sun Sep 25 15:25:04 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Sep 25 15:25:34 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Sep 25 15:25:34 2011] Initial guess for spatial extent in simple fitting = 1.01"
[Sun Sep 25 15:25:34 2011] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.956
[Sun Sep 25 15:25:34 2011] Giving source the simple spatial ID 13 for pass 1, mean size = 1.01"
[Sun Sep 25 15:25:35 2011] fullrun_ccd3_acisf09817_pi14-548_cl_pass1_src13.ximg exists
[Sun Sep 25 15:25:35 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf09817_pi14-548_cl_pass1_src13.csv
[Sun Sep 25 15:25:35 2011] fullrun_ccd3_acisf09817_pi14-548_cl_pass1_src13_1.ximg exists
[Sun Sep 25 15:25:35 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf09817_pi14-548_cl_pass1_src13.csv
[Sun Sep 25 15:25:35 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf09817_pi14-548_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf09817_pi14-548_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep 25 15:25:36 2011] fullrun_ccd3_acisf09817_pi14-548_cl_pass1_tfrozen_src13.ximg exists
[Sun Sep 25 15:25:36 2011] fullrun_ccd3_acisf09817_pi14-548_cl_pass1_tfrozen_src13_1.ximg exists
[Sun Sep 25 15:25:36 2011] Fit fullrun_ccd3_acisf09817_pi14-548_cl_pass1_tfrozen_src13 appears to have run properly
[Sun Sep 25 15:25:50 2011] Spatial fit model total counts = 18.249900, observed total counts = 19.000000
[Sun Sep 25 15:25:50 2011] Offset between fit and detection position for source 13 = 0.064713 pixels
[Sun Sep 25 15:25:50 2011] 17.893560 total counts/ 2.086860 bgd. counts: snr = 10.941946
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 0.064713 pixels
  Position = (754.8, 319.4) = 10 44 38.09 -60 9 57.3
  Extent = 1.0 (0.5-1.5)", rotation angle = 0
  Source counts = 15.8 +/- 4.2
  Background counts = 2.1
  Rate = 0.0008 +/- 0.0002
[Sun Sep 25 15:25:50 2011] Vigneting correction estimate = 1.000000
[Sun Sep 25 15:25:50 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Sep 25 15:25:50 2011] Assessing source extent using major axis lower bound
[Sun Sep 25 15:25:50 2011] Source does appear to be extended
[Sun Sep 25 15:25:50 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Sep 25 15:30:14 2011] Not overwriting source region fullrun_ccd3_acisf09817_pi14-548_pass1_cl_src13_src.reg
[Sun Sep 25 15:30:14 2011] Extracting stamp from image fullrun_ccd3_acisf09817_pi14-548_cl_sm2.00.img.gz, (709, 274) - (800, 365)
[Sun Sep 25 15:30:14 2011] Writing fullrun_ccd3_acisf09817_pi14-548_pass1_cl_src13.gif
[Sun Sep 25 15:31:01 2011] ../../acisf09817/products/events/fullrun_ccd3_acisf09817_pi14-548_pass1_cl_src13_src.evt and ../../acisf09817/products/events/fullrun_ccd3_acisf09817_pi14-548_pass1_cl_src13_bgd.evt exist, delete to re-create
[Sun Sep 25 15:31:01 2011] Size of ../../acisf09817/products/events/fullrun_ccd3_acisf09817_pi14-548_pass1_cl_src13_src.evt.gz[events] = 17 counts
[Sun Sep 25 15:31:01 2011] Mean chipx,y = (790.12, 374.24)
[Sun Sep 25 15:31:01 2011] Mean tdetx,y = (4757.76, 3851.12)
[Sun Sep 25 15:31:01 2011] chipx,y range = (770.00-803.00, 357.00-390.00)
[Sun Sep 25 15:31:02 2011] Size of ../../acisf09817/products/events/fullrun_ccd3_acisf09817_pi14-548_pass1_cl_src13_bgd.evt.gz[events] = 20 counts
[Sun Sep 25 15:31:02 2011] ../../acisf09817/products/images/fullrun_ccd3_acisf09817_pi14-548_pass1_cl_src13_src.img and ../../acisf09817/products/images/fullrun_ccd3_acisf09817_pi14-548_pass1_cl_src13_bgd.img exist, delete to re-create
[Sun Sep 25 15:31:02 2011] ../../acisf09817/products/spectra/fullrun_ccd3_acisf09817_pi14-548_pass1_cl_src13_src.pi and ../../acisf09817/products/spectra/fullrun_ccd3_acisf09817_pi14-548_pass1_cl_src13_bgd.pi exist, delete to re-create
[Sun Sep 25 15:31:02 2011] Not generating rmf since there are only 15 counts
[Sun Sep 25 15:31:04 2011] ../../acisf09817/products/lightcurves/fullrun_ccd3_acisf09817_pi14-548_pass1_cl_src13_src.lc and ../../acisf09817/products/lightcurves/fullrun_ccd3_acisf09817_pi14-548_pass1_cl_src13_bgd.lc exist, delete to re-create
[Sun Sep 25 15:32:35 2011] 169.838
[Sun Sep 25 15:33:24 2011] Updating aperture counts using extracted products
[Sun Sep 25 15:33:24 2011] Error reading totcts from fullrun_ccd3_acisf09817_pi14-548_pass1_cl_src13_src.pi.gz
[Sun Sep 25 15:33:24 2011] Calculating source flux in energy range 0.30-8.00
[Sun Sep 25 15:33:24 2011] Using photon index=1.80, rate=0.000793, arf fullrun_ccd3_acisf09817_pi14-548_pass1_cl_src13.arf
[Sun Sep 25 15:33:24 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Sep 25 15:33:24 2011] Updating source flux to 1.4e-14
[Sun Sep 25 15:33:32 2011] Source 13 has fewer than 100.000000 counts, skipping spectral fitting