[Fri Oct 28 06:48:41 2011] Detection parameters:
  Position = (831.0, 577.1) = 20 42 3.20 75 4 32.9
  Extent = 1.1" x 0.6", rotation angle = 130 degrees
  Source counts = 84.1 +/- 9.3
  Background counts = 2.9
  Rate = 0.007 +/- 0.0007

[Fri Oct 28 06:48:42 2011] Off-axis axis estimate = 4.90'
[Fri Oct 28 06:49:10 2011] Using EEF radius (= 1.14 ")to estimate initial spatial extent for simple fitting
[Fri Oct 28 06:49:10 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Oct 28 06:49:10 2011] Initial guess for spatial extent in simple fitting = 1.14"
[Fri Oct 28 06:49:10 2011] source mask rpix=2.3, npix_max = 31, mask sum = 36, frac = 1.131
[Fri Oct 28 06:49:10 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 1.14"
[Fri Oct 28 06:49:12 2011] fullrun_ccd7_acisf09800_pi14-548_cl_pass0_src3.ximg exists
[Fri Oct 28 06:49:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf09800_pi14-548_cl_pass0_src3.csv
[Fri Oct 28 06:49:12 2011] fullrun_ccd7_acisf09800_pi14-548_cl_pass0_src3_1.ximg exists
[Fri Oct 28 06:49:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf09800_pi14-548_cl_pass0_src3.csv
[Fri Oct 28 06:49:12 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf09800_pi14-548_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf09800_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 28 06:49:12 2011] fullrun_ccd7_acisf09800_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Fri Oct 28 06:49:12 2011] fullrun_ccd7_acisf09800_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Fri Oct 28 06:49:12 2011] Fit fullrun_ccd7_acisf09800_pi14-548_cl_pass0_tfrozen_src3 appears to have run properly
[Fri Oct 28 06:49:17 2011] Spatial fit model total counts = 89.436300, observed total counts = 91.000000
[Fri Oct 28 06:49:17 2011] Offset between fit and detection position for source 3 = 0.977118 pixels
[Fri Oct 28 06:49:17 2011] 89.283740 total counts/ 9.132240 bgd. counts: snr = 26.523021
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.977118 pixels
  Position = (831.2, 578.0) = 20 42 3.24 75 4 33.2
  Extent = 1.1 (0.9-1.4)", rotation angle = 0
  Source counts = 80.2 +/- 9.4
  Background counts = 9.1
  Rate = 0.006 +/- 0.0007
[Fri Oct 28 06:49:17 2011] Vigneting correction estimate = 1.000000
[Fri Oct 28 06:49:17 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 28 06:49:17 2011] Assessing source extent using major axis lower bound
[Fri Oct 28 06:49:17 2011] Source does appear to be extended
[Fri Oct 28 06:49:17 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 28 06:49:32 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct 28 06:49:32 2011] Initial guess for spatial extent in simple fitting = 1.12"
[Fri Oct 28 06:49:32 2011] source mask rpix=2.3, npix_max = 30, mask sum = 36, frac = 1.169
[Fri Oct 28 06:49:32 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 1.12"
[Fri Oct 28 06:49:33 2011] fullrun_ccd7_acisf09800_pi14-548_cl_pass1_src3.ximg exists
[Fri Oct 28 06:49:33 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf09800_pi14-548_cl_pass1_src3.csv
[Fri Oct 28 06:49:33 2011] fullrun_ccd7_acisf09800_pi14-548_cl_pass1_src3_1.ximg exists
[Fri Oct 28 06:49:33 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf09800_pi14-548_cl_pass1_src3.csv
[Fri Oct 28 06:49:33 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf09800_pi14-548_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf09800_pi14-548_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 28 06:49:33 2011] fullrun_ccd7_acisf09800_pi14-548_cl_pass1_tfrozen_src3.ximg exists
[Fri Oct 28 06:49:33 2011] fullrun_ccd7_acisf09800_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists
[Fri Oct 28 06:49:33 2011] Fit fullrun_ccd7_acisf09800_pi14-548_cl_pass1_tfrozen_src3 appears to have run properly
[Fri Oct 28 06:49:37 2011] Spatial fit model total counts = 88.285300, observed total counts = 90.000000
[Fri Oct 28 06:49:37 2011] Offset between fit and detection position for source 3 = 0.042603 pixels
[Fri Oct 28 06:49:37 2011] 87.674570 total counts/ 8.792970 bgd. counts: snr = 26.601610
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.042603 pixels
  Position = (831.2, 578.1) = 20 42 3.24 75 4 33.2
  Extent = 1.1 (0.9-1.3)", rotation angle = 0
  Source counts = 78.9 +/- 9.4
  Background counts = 8.8
  Rate = 0.006 +/- 0.0007
[Fri Oct 28 06:49:37 2011] Vigneting correction estimate = 1.000000
[Fri Oct 28 06:49:37 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 28 06:49:37 2011] Assessing source extent using major axis lower bound
[Fri Oct 28 06:49:37 2011] Source does appear to be extended
[Fri Oct 28 06:49:37 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 28 06:50:31 2011] Not overwriting source region fullrun_ccd7_acisf09800_pi14-548_pass1_cl_src3_src.reg
[Fri Oct 28 06:50:31 2011] Extracting stamp from image fullrun_ccd7_acisf09800_pi14-548_cl_sm2.00.img.gz, (781, 528) - (882, 629)
[Fri Oct 28 06:50:31 2011] Writing fullrun_ccd7_acisf09800_pi14-548_pass1_cl_src3.gif
[Fri Oct 28 06:50:39 2011] ../../acisf09800/products/events/fullrun_ccd7_acisf09800_pi14-548_pass1_cl_src3_src.evt and ../../acisf09800/products/events/fullrun_ccd7_acisf09800_pi14-548_pass1_cl_src3_bgd.evt exist, delete to re-create
[Fri Oct 28 06:50:39 2011] Size of ../../acisf09800/products/events/fullrun_ccd7_acisf09800_pi14-548_pass1_cl_src3_src.evt.gz[events] = 89 counts
[Fri Oct 28 06:50:39 2011] Mean chipx,y = (792.15, 504.67)
[Fri Oct 28 06:50:39 2011] Mean tdetx,y = (4709.15, 2206.67)
[Fri Oct 28 06:50:39 2011] chipx,y range = (773.00-811.00, 488.00-526.00)
[Fri Oct 28 06:50:39 2011] Size of ../../acisf09800/products/events/fullrun_ccd7_acisf09800_pi14-548_pass1_cl_src3_bgd.evt.gz[events] = 37 counts
[Fri Oct 28 06:50:39 2011] ../../acisf09800/products/images/fullrun_ccd7_acisf09800_pi14-548_pass1_cl_src3_src.img and ../../acisf09800/products/images/fullrun_ccd7_acisf09800_pi14-548_pass1_cl_src3_bgd.img exist, delete to re-create
[Fri Oct 28 06:50:39 2011] ../../acisf09800/products/spectra/fullrun_ccd7_acisf09800_pi14-548_pass1_cl_src3_src.pi and ../../acisf09800/products/spectra/fullrun_ccd7_acisf09800_pi14-548_pass1_cl_src3_bgd.pi exist, delete to re-create
[Fri Oct 28 06:50:39 2011] Not generating rmf since there are only 78 counts
[Fri Oct 28 06:50:42 2011] ../../acisf09800/products/lightcurves/fullrun_ccd7_acisf09800_pi14-548_pass1_cl_src3_src.lc and ../../acisf09800/products/lightcurves/fullrun_ccd7_acisf09800_pi14-548_pass1_cl_src3_bgd.lc exist, delete to re-create
[Fri Oct 28 06:51:24 2011] 221.517
[Fri Oct 28 06:51:27 2011] Updating aperture counts using extracted products
[Fri Oct 28 06:51:27 2011] Error reading totcts from fullrun_ccd7_acisf09800_pi14-548_pass1_cl_src3_src.pi.gz
[Fri Oct 28 06:51:27 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 28 06:51:27 2011] Using photon index=1.80, rate=0.00613, arf fullrun_ccd7_acisf09800_pi14-548_pass1_cl_src3.arf
[Fri Oct 28 06:51:27 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct 28 06:51:27 2011] Updating source flux to 4.9e-14
[Fri Oct 28 06:51:31 2011] Source 3 has fewer than 100.000000 counts, skipping spectral fitting