[Sat Oct 22 20:06:59 2011] Detection parameters:
  Position = (679.6, 356.7) = 18 19 0.42 -13 47 14.2
  Extent = 0.7" x 0.5", rotation angle = 68 degrees
  Source counts = 46.4 +/- 7.1
  Background counts = 3.6
  Rate = 0.0006 +/- 9e-05

[Sat Oct 22 20:07:18 2011] Off-axis axis estimate = 4.09'
[Sat Oct 22 20:10:52 2011] Using EEF radius (= 0.86 ")to estimate initial spatial extent for simple fitting
[Sat Oct 22 20:10:52 2011] Initial guess for spatial extent in simple fitting = 0.86"
[Sat Oct 22 20:10:52 2011] source mask rpix=1.7, npix_max = 20, mask sum = 25, frac = 1.244
[Sat Oct 22 20:10:52 2011] Giving source the simple spatial ID 97 for pass 0, mean size = 0.86"
[Sat Oct 22 20:10:56 2011] fullrun_ccd3_acisf00978_pi14-548_cl_pass0_src97.ximg exists
[Sat Oct 22 20:10:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf00978_pi14-548_cl_pass0_src97.csv
[Sat Oct 22 20:10:56 2011] fullrun_ccd3_acisf00978_pi14-548_cl_pass0_src97_1.ximg exists
[Sat Oct 22 20:10:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf00978_pi14-548_cl_pass0_src97.csv
[Sat Oct 22 20:10:56 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf00978_pi14-548_cl_pass0_src97_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf00978_pi14-548_cl_pass0_src97.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 22 20:10:58 2011] fullrun_ccd3_acisf00978_pi14-548_cl_pass0_tfrozen_src97.ximg exists
[Sat Oct 22 20:10:58 2011] fullrun_ccd3_acisf00978_pi14-548_cl_pass0_tfrozen_src97_1.ximg exists
[Sat Oct 22 20:10:58 2011] Fit fullrun_ccd3_acisf00978_pi14-548_cl_pass0_tfrozen_src97 appears to have run properly
[Sat Oct 22 20:12:12 2011] Spatial fit model total counts = 56.916800, observed total counts = 56.000000
[Sat Oct 22 20:12:12 2011] Offset between fit and detection position for source 98 = 1.032580 pixels
[Sat Oct 22 20:12:12 2011] 55.797600 total counts/ 10.921800 bgd. counts: snr = 13.578916
Spatial fit parameters:
  Offset between fit and detection position for source 98 = 1.032580 pixels
  Position = (680.3, 357.5) = 18 19 0.41 -13 47 14.1
  Extent = 0.6 (0.5-0.7)", rotation angle = 0
  Source counts = 44.9 +/- 7.5
  Background counts = 10.9
  Rate = 0.0006 +/- 0.0001
[Sat Oct 22 20:12:12 2011] Vigneting correction estimate = 1.000000
[Sat Oct 22 20:12:12 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 22 20:12:12 2011] Assessing source extent using major axis lower bound
[Sat Oct 22 20:12:12 2011] Source does appear to be extended
[Sat Oct 22 20:12:12 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 22 20:13:56 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Oct 22 20:13:56 2011] Initial guess for spatial extent in simple fitting = 0.60"
[Sat Oct 22 20:13:56 2011] source mask rpix=1.2, npix_max = 11, mask sum = 9, frac = 0.768
[Sat Oct 22 20:13:56 2011] Giving source the simple spatial ID 97 for pass 1, mean size = 0.60"
[Sat Oct 22 20:14:00 2011] fullrun_ccd3_acisf00978_pi14-548_cl_pass1_src97.ximg exists
[Sat Oct 22 20:14:00 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf00978_pi14-548_cl_pass1_src97.csv
[Sat Oct 22 20:14:00 2011] fullrun_ccd3_acisf00978_pi14-548_cl_pass1_src97_1.ximg exists
[Sat Oct 22 20:14:00 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf00978_pi14-548_cl_pass1_src97.csv
[Sat Oct 22 20:14:00 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf00978_pi14-548_cl_pass1_src97_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf00978_pi14-548_cl_pass1_src97.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 22 20:14:02 2011] fullrun_ccd3_acisf00978_pi14-548_cl_pass1_tfrozen_src97.ximg exists
[Sat Oct 22 20:14:02 2011] fullrun_ccd3_acisf00978_pi14-548_cl_pass1_tfrozen_src97_1.ximg exists
[Sat Oct 22 20:14:02 2011] Fit fullrun_ccd3_acisf00978_pi14-548_cl_pass1_tfrozen_src97 appears to have run properly
[Sat Oct 22 20:15:13 2011] Spatial fit model total counts = 55.595700, observed total counts = 57.000000
[Sat Oct 22 20:15:13 2011] Offset between fit and detection position for source 98 = 0.045670 pixels
[Sat Oct 22 20:15:13 2011] 54.400200 total counts/ 11.603800 bgd. counts: snr = 12.563398
Spatial fit parameters:
  Offset between fit and detection position for source 98 = 0.045670 pixels
  Position = (680.3, 357.5) = 18 19 0.42 -13 47 14.1
  Extent = 0.6 (0.5-0.7)", rotation angle = 0
  Source counts = 42.8 +/- 7.4
  Background counts = 11.6
  Rate = 0.0006 +/- 0.0001
[Sat Oct 22 20:15:13 2011] Vigneting correction estimate = 1.000000
[Sat Oct 22 20:15:13 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 22 20:15:13 2011] Assessing source extent using major axis lower bound
[Sat Oct 22 20:15:13 2011] Source does appear to be extended
[Sat Oct 22 20:15:13 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 22 20:42:13 2011] Not overwriting source region fullrun_ccd3_acisf00978_pi14-548_pass1_cl_src98_src.reg
[Sat Oct 22 20:42:13 2011] Extracting stamp from image fullrun_ccd3_acisf00978_pi14-548_cl_sm2.00.img.gz, (653, 330) - (708, 385)
[Sat Oct 22 20:42:13 2011] Writing fullrun_ccd3_acisf00978_pi14-548_pass1_cl_src98.gif
[Sat Oct 22 20:47:03 2011] ../../acisf00978/products/events/fullrun_ccd3_acisf00978_pi14-548_pass1_cl_src98_src.evt and ../../acisf00978/products/events/fullrun_ccd3_acisf00978_pi14-548_pass1_cl_src98_bgd.evt exist, delete to re-create
[Sat Oct 22 20:47:03 2011] Size of ../../acisf00978/products/events/fullrun_ccd3_acisf00978_pi14-548_pass1_cl_src98_src.evt.gz[events] = 49 counts
[Sat Oct 22 20:47:03 2011] Mean chipx,y = (522.57, 781.45)
[Sat Oct 22 20:47:03 2011] Mean tdetx,y = (4350.55, 3583.57)
[Sat Oct 22 20:47:03 2011] chipx,y range = (504.00-537.00, 763.00-800.00)
[Sat Oct 22 20:47:03 2011] Size of ../../acisf00978/products/events/fullrun_ccd3_acisf00978_pi14-548_pass1_cl_src98_bgd.evt.gz[events] = 20 counts
[Sat Oct 22 20:47:03 2011] ../../acisf00978/products/images/fullrun_ccd3_acisf00978_pi14-548_pass1_cl_src98_src.img and ../../acisf00978/products/images/fullrun_ccd3_acisf00978_pi14-548_pass1_cl_src98_bgd.img exist, delete to re-create
[Sat Oct 22 20:47:03 2011] ../../acisf00978/products/spectra/fullrun_ccd3_acisf00978_pi14-548_pass1_cl_src98_src.pi and ../../acisf00978/products/spectra/fullrun_ccd3_acisf00978_pi14-548_pass1_cl_src98_bgd.pi exist, delete to re-create
[Sat Oct 22 20:47:03 2011] Not generating rmf since there are only 42 counts
[Sat Oct 22 20:47:06 2011] ../../acisf00978/products/lightcurves/fullrun_ccd3_acisf00978_pi14-548_pass1_cl_src98_src.lc and ../../acisf00978/products/lightcurves/fullrun_ccd3_acisf00978_pi14-548_pass1_cl_src98_bgd.lc exist, delete to re-create
[Sat Oct 22 20:57:24 2011] 188.822
[Sat Oct 22 20:58:33 2011] Updating aperture counts using extracted products
[Sat Oct 22 20:58:33 2011] Error reading totcts from fullrun_ccd3_acisf00978_pi14-548_pass1_cl_src98_src.pi.gz
[Sat Oct 22 20:58:38 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct 22 20:58:38 2011] Using photon index=1.80, rate=0.000555, arf fullrun_ccd3_acisf00978_pi14-548_pass1_cl_src98.arf
[Sat Oct 22 20:58:38 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct 22 20:58:38 2011] Updating source flux to 8.5e-15
[Sat Oct 22 21:03:02 2011] Source 98 has fewer than 100.000000 counts, skipping spectral fitting