[Sat Oct 22 20:06:46 2011] Detection parameters:
  Position = (319.1, 1051.4) = 18 19 4.76 -13 49 48.8
  Extent = 0.5" x 0.5", rotation angle = 129 degrees
  Source counts = 32.3 +/- 6.0
  Background counts = 3.7
  Rate = 0.0004 +/- 8e-05

[Sat Oct 22 20:06:52 2011] Off-axis axis estimate = 5.30'
[Sat Oct 22 20:10:41 2011] Using EEF radius (= 1.30 ")to estimate initial spatial extent for simple fitting
[Sat Oct 22 20:10:41 2011] Initial guess for spatial extent in simple fitting = 1.30"
[Sat Oct 22 20:10:41 2011] source mask rpix=2.6, npix_max = 39, mask sum = 35, frac = 0.883
[Sat Oct 22 20:10:41 2011] Giving source the simple spatial ID 47 for pass 0, mean size = 1.30"
[Sat Oct 22 20:10:45 2011] fullrun_ccd2_acisf00978_pi14-548_cl_pass0_src47.ximg exists
[Sat Oct 22 20:10:45 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf00978_pi14-548_cl_pass0_src47.csv
[Sat Oct 22 20:10:45 2011] fullrun_ccd2_acisf00978_pi14-548_cl_pass0_src47_1.ximg exists
[Sat Oct 22 20:10:45 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf00978_pi14-548_cl_pass0_src47.csv
[Sat Oct 22 20:10:45 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf00978_pi14-548_cl_pass0_src47_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf00978_pi14-548_cl_pass0_src47.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 22 20:10:50 2011] fullrun_ccd2_acisf00978_pi14-548_cl_pass0_tfrozen_src47.ximg exists
[Sat Oct 22 20:10:50 2011] fullrun_ccd2_acisf00978_pi14-548_cl_pass0_tfrozen_src47_1.ximg exists
[Sat Oct 22 20:10:50 2011] Fit fullrun_ccd2_acisf00978_pi14-548_cl_pass0_tfrozen_src47 appears to have run properly
[Sat Oct 22 20:11:58 2011] Spatial fit model total counts = 40.076900, observed total counts = 41.000000
[Sat Oct 22 20:11:58 2011] Offset between fit and detection position for source 70 = 1.180838 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 70 = 1.180838 pixels
  Position = (319.4, 1052.5) = 18 19 4.77 -13 49 48.5
  Extent = 1.1 (1.0-1.3)", rotation angle = 0
  Source counts = 40.0 +/- 6.3
  Background counts = 0.0
  Rate = 0.0005 +/- 8e-05
[Sat Oct 22 20:11:58 2011] Vigneting correction estimate = 1.000000
[Sat Oct 22 20:11:58 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 22 20:11:58 2011] Assessing source extent using major axis lower bound
[Sat Oct 22 20:11:58 2011] Source does appear to be extended
[Sat Oct 22 20:11:58 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 22 20:13:46 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Oct 22 20:13:46 2011] Initial guess for spatial extent in simple fitting = 1.13"
[Sat Oct 22 20:13:46 2011] source mask rpix=2.3, npix_max = 31, mask sum = 20, frac = 0.640
[Sat Oct 22 20:13:46 2011] Giving source the simple spatial ID 47 for pass 1, mean size = 1.13"
[Sat Oct 22 20:13:50 2011] fullrun_ccd2_acisf00978_pi14-548_cl_pass1_src47.ximg exists
[Sat Oct 22 20:13:51 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf00978_pi14-548_cl_pass1_src47.csv
[Sat Oct 22 20:13:51 2011] fullrun_ccd2_acisf00978_pi14-548_cl_pass1_src47_1.ximg exists
[Sat Oct 22 20:13:51 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf00978_pi14-548_cl_pass1_src47.csv
[Sat Oct 22 20:13:51 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf00978_pi14-548_cl_pass1_src47_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf00978_pi14-548_cl_pass1_src47.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 22 20:13:54 2011] fullrun_ccd2_acisf00978_pi14-548_cl_pass1_tfrozen_src47.ximg exists
[Sat Oct 22 20:13:54 2011] fullrun_ccd2_acisf00978_pi14-548_cl_pass1_tfrozen_src47_1.ximg exists
[Sat Oct 22 20:13:54 2011] Fit fullrun_ccd2_acisf00978_pi14-548_cl_pass1_tfrozen_src47 appears to have run properly
[Sat Oct 22 20:14:59 2011] Spatial fit model total counts = 40.120500, observed total counts = 40.000000
[Sat Oct 22 20:14:59 2011] Offset between fit and detection position for source 70 = 0.072142 pixels
[Sat Oct 22 20:14:59 2011] 40.245939 total counts/ 0.006039 bgd. counts: snr = 517.820277
Spatial fit parameters:
  Offset between fit and detection position for source 70 = 0.072142 pixels
  Position = (319.4, 1052.6) = 18 19 4.77 -13 49 48.5
  Extent = 1.1 (0.9-1.2)", rotation angle = 0
  Source counts = 40.2 +/- 6.3
  Background counts = 0.0
  Rate = 0.0005 +/- 8e-05
[Sat Oct 22 20:15:00 2011] Vigneting correction estimate = 1.000000
[Sat Oct 22 20:15:00 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 22 20:15:00 2011] Assessing source extent using major axis lower bound
[Sat Oct 22 20:15:00 2011] Source does appear to be extended
[Sat Oct 22 20:15:00 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 22 20:34:42 2011] Not overwriting source region fullrun_ccd2_acisf00978_pi14-548_pass1_cl_src70_src.reg
[Sat Oct 22 20:34:42 2011] Extracting stamp from image fullrun_ccd2_acisf00978_pi14-548_cl_sm2.00.img.gz, (270, 1003) - (369, 1102)
[Sat Oct 22 20:34:42 2011] Writing fullrun_ccd2_acisf00978_pi14-548_pass1_cl_src70.gif
[Sat Oct 22 20:36:59 2011] ../../acisf00978/products/events/fullrun_ccd2_acisf00978_pi14-548_pass1_cl_src70_src.evt and ../../acisf00978/products/events/fullrun_ccd2_acisf00978_pi14-548_pass1_cl_src70_bgd.evt exist, delete to re-create
[Sat Oct 22 20:36:59 2011] Size of ../../acisf00978/products/events/fullrun_ccd2_acisf00978_pi14-548_pass1_cl_src70_src.evt.gz[events] = 42 counts
[Sat Oct 22 20:36:59 2011] Mean chipx,y = (695.12, 1007.36)
[Sat Oct 22 20:36:59 2011] Mean tdetx,y = (4068.36, 3390.88)
[Sat Oct 22 20:36:59 2011] chipx,y range = (679.00-715.00, 991.00-1022.00)
[Sat Oct 22 20:36:59 2011] Size of ../../acisf00978/products/events/fullrun_ccd2_acisf00978_pi14-548_pass1_cl_src70_bgd.evt.gz[events] = 71 counts
[Sat Oct 22 20:36:59 2011] ../../acisf00978/products/images/fullrun_ccd2_acisf00978_pi14-548_pass1_cl_src70_src.img and ../../acisf00978/products/images/fullrun_ccd2_acisf00978_pi14-548_pass1_cl_src70_bgd.img exist, delete to re-create
[Sat Oct 22 20:36:59 2011] ../../acisf00978/products/spectra/fullrun_ccd2_acisf00978_pi14-548_pass1_cl_src70_src.pi and ../../acisf00978/products/spectra/fullrun_ccd2_acisf00978_pi14-548_pass1_cl_src70_bgd.pi exist, delete to re-create
[Sat Oct 22 20:36:59 2011] Not generating rmf since there are only 40 counts
[Sat Oct 22 20:37:02 2011] ../../acisf00978/products/lightcurves/fullrun_ccd2_acisf00978_pi14-548_pass1_cl_src70_src.lc and ../../acisf00978/products/lightcurves/fullrun_ccd2_acisf00978_pi14-548_pass1_cl_src70_bgd.lc exist, delete to re-create
[Sat Oct 22 20:42:03 2011] 183.136
[Sat Oct 22 20:58:27 2011] Updating aperture counts using extracted products
[Sat Oct 22 20:58:27 2011] Error reading totcts from fullrun_ccd2_acisf00978_pi14-548_pass1_cl_src70_src.pi.gz
[Sat Oct 22 20:58:30 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct 22 20:58:30 2011] Using photon index=1.80, rate=0.000522, arf fullrun_ccd2_acisf00978_pi14-548_pass1_cl_src70.arf
[Sat Oct 22 20:58:30 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct 22 20:58:30 2011] Updating source flux to 8.2e-15
[Sat Oct 22 21:02:06 2011] Source 70 has fewer than 100.000000 counts, skipping spectral fitting