[Sat Oct 22 20:06:22 2011] Detection parameters:
  Position = (251.6, 413.2) = 18 18 40.46 -13 44 55.3
  Extent = 0.5" x 0.5", rotation angle = 32 degrees
  Source counts = 140.1 +/- 12.1
  Background counts = 5.9
  Rate = 0.002 +/- 0.0002

[Sat Oct 22 20:06:41 2011] Off-axis axis estimate = 3.36'
[Sat Oct 22 20:10:32 2011] Using EEF radius (= 0.66 ")to estimate initial spatial extent for simple fitting
[Sat Oct 22 20:10:32 2011] Initial guess for spatial extent in simple fitting = 0.66"
[Sat Oct 22 20:10:32 2011] source mask rpix=1.3, npix_max = 13, mask sum = 12, frac = 0.887
[Sat Oct 22 20:10:32 2011] Giving source the simple spatial ID 27 for pass 0, mean size = 0.66"
[Sat Oct 22 20:10:35 2011] fullrun_ccd1_acisf00978_pi14-548_cl_pass0_src27.ximg exists
[Sat Oct 22 20:10:35 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf00978_pi14-548_cl_pass0_src27.csv
[Sat Oct 22 20:10:35 2011] fullrun_ccd1_acisf00978_pi14-548_cl_pass0_src27_1.ximg exists
[Sat Oct 22 20:10:35 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf00978_pi14-548_cl_pass0_src27.csv
[Sat Oct 22 20:10:35 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf00978_pi14-548_cl_pass0_src27_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf00978_pi14-548_cl_pass0_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 22 20:10:37 2011] fullrun_ccd1_acisf00978_pi14-548_cl_pass0_tfrozen_src27.ximg exists
[Sat Oct 22 20:10:38 2011] fullrun_ccd1_acisf00978_pi14-548_cl_pass0_tfrozen_src27_1.ximg exists
[Sat Oct 22 20:10:38 2011] Fit fullrun_ccd1_acisf00978_pi14-548_cl_pass0_tfrozen_src27 appears to have run properly
[Sat Oct 22 20:11:44 2011] Source 71 is offset by -4.792803 and -6.185869 pixels which is larger than
2 X fitted extent = 0.669659 x 0.669659, not incorporating fit results
[Sat Oct 22 20:11:45 2011] Vigneting correction estimate = 1.000000
[Sat Oct 22 20:11:45 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 22 20:11:45 2011] Assessing source extent using major
[Sat Oct 22 20:11:45 2011] Source does appear to be extended
[Sat Oct 22 20:11:45 2011] Computing asymmetry using major and minor axis, asym = 1.10
[Sat Oct 22 20:13:35 2011] Using EEF radius (= 0.66 ")to estimate initial spatial extent for simple fitting
[Sat Oct 22 20:13:35 2011] Initial guess for spatial extent in simple fitting = 0.66"
[Sat Oct 22 20:13:35 2011] source mask rpix=1.3, npix_max = 13, mask sum = 12, frac = 0.887
[Sat Oct 22 20:13:35 2011] Giving source the simple spatial ID 27 for pass 1, mean size = 0.66"
[Sat Oct 22 20:13:38 2011] fullrun_ccd1_acisf00978_pi14-548_cl_pass1_src27.ximg exists
[Sat Oct 22 20:13:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf00978_pi14-548_cl_pass1_src27.csv
[Sat Oct 22 20:13:38 2011] fullrun_ccd1_acisf00978_pi14-548_cl_pass1_src27_1.ximg exists
[Sat Oct 22 20:13:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf00978_pi14-548_cl_pass1_src27.csv
[Sat Oct 22 20:13:38 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf00978_pi14-548_cl_pass1_src27_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf00978_pi14-548_cl_pass1_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 22 20:13:40 2011] fullrun_ccd1_acisf00978_pi14-548_cl_pass1_tfrozen_src27.ximg exists
[Sat Oct 22 20:13:40 2011] fullrun_ccd1_acisf00978_pi14-548_cl_pass1_tfrozen_src27_1.ximg exists
[Sat Oct 22 20:13:40 2011] Fit fullrun_ccd1_acisf00978_pi14-548_cl_pass1_tfrozen_src27 appears to have run properly
[Sat Oct 22 20:14:45 2011] Spatial fit model total counts = 155.000000, observed total counts = 155.000000
[Sat Oct 22 20:14:45 2011] Offset between fit and detection position for source 71 = 0.725776 pixels
[Sat Oct 22 20:14:45 2011] 155.071700 total counts/ 17.720700 bgd. counts: snr = 32.628070
Spatial fit parameters:
  Offset between fit and detection position for source 71 = 0.725776 pixels
  Position = (252.1, 413.7) = 18 18 40.46 -13 44 55.3
  Extent = 0.6 (0.5-0.7)", rotation angle = 0
  Source counts = 137.4 +/- 12.5
  Background counts = 17.7
  Rate = 0.002 +/- 0.0002
[Sat Oct 22 20:14:46 2011] Vigneting correction estimate = 1.000000
[Sat Oct 22 20:14:46 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 22 20:14:46 2011] Assessing source extent using major axis lower bound
[Sat Oct 22 20:14:46 2011] Source does appear to be extended
[Sat Oct 22 20:14:46 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 22 20:20:31 2011] Not overwriting source region fullrun_ccd1_acisf00978_pi14-548_pass1_cl_src71_src.reg
[Sat Oct 22 20:20:31 2011] Extracting stamp from image fullrun_ccd1_acisf00978_pi14-548_cl_sm2.00.img.gz, (224, 386) - (280, 442)
[Sat Oct 22 20:20:31 2011] Writing fullrun_ccd1_acisf00978_pi14-548_pass1_cl_src71.gif
[Sat Oct 22 20:22:05 2011] ../../acisf00978/products/events/fullrun_ccd1_acisf00978_pi14-548_pass1_cl_src71_src.evt and ../../acisf00978/products/events/fullrun_ccd1_acisf00978_pi14-548_pass1_cl_src71_bgd.evt exist, delete to re-create
[Sat Oct 22 20:22:05 2011] Size of ../../acisf00978/products/events/fullrun_ccd1_acisf00978_pi14-548_pass1_cl_src71_src.evt.gz[events] = 143 counts
[Sat Oct 22 20:22:05 2011] Mean chipx,y = (116.83, 630.70)
[Sat Oct 22 20:22:05 2011] Mean tdetx,y = (4501.30, 4223.83)
[Sat Oct 22 20:22:05 2011] chipx,y range = (94.00-134.00, 614.00-650.00)
[Sat Oct 22 20:22:05 2011] Size of ../../acisf00978/products/events/fullrun_ccd1_acisf00978_pi14-548_pass1_cl_src71_bgd.evt.gz[events] = 28 counts
[Sat Oct 22 20:22:05 2011] ../../acisf00978/products/images/fullrun_ccd1_acisf00978_pi14-548_pass1_cl_src71_src.img and ../../acisf00978/products/images/fullrun_ccd1_acisf00978_pi14-548_pass1_cl_src71_bgd.img exist, delete to re-create
[Sat Oct 22 20:22:05 2011] ../../acisf00978/products/spectra/fullrun_ccd1_acisf00978_pi14-548_pass1_cl_src71_src.pi and ../../acisf00978/products/spectra/fullrun_ccd1_acisf00978_pi14-548_pass1_cl_src71_bgd.pi exist, delete to re-create
[Sat Oct 22 20:22:08 2011] ../../acisf00978/products/lightcurves/fullrun_ccd1_acisf00978_pi14-548_pass1_cl_src71_src.lc and ../../acisf00978/products/lightcurves/fullrun_ccd1_acisf00978_pi14-548_pass1_cl_src71_bgd.lc exist, delete to re-create
[Sat Oct 22 20:34:30 2011] Keeping rmf generated by specextract
[Sat Oct 22 20:34:30 2011] 198.15
[Sat Oct 22 20:58:18 2011] Updating aperture counts using extracted products
[Sat Oct 22 20:58:18 2011] Error reading totcts from fullrun_ccd1_acisf00978_pi14-548_pass1_cl_src71_src.pi.gz
[Sat Oct 22 20:58:23 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct 22 20:58:23 2011] Using photon index=1.80, rate=0.00178, arf fullrun_ccd1_acisf00978_pi14-548_pass1_cl_src71.arf
[Sat Oct 22 20:58:23 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct 22 20:58:23 2011] Updating source flux to 2.6e-14
[Sat Oct 22 20:59:35 2011] Flag b found in src. 71 procflags, skipping spectral fitting