[Sat Oct 22 20:06:20 2011] Detection parameters:
  Position = (222.6, 142.9) = 18 18 41.44 -13 47 8.3
  Extent = 0.5" x 0.5", rotation angle = 36 degrees
  Source counts = 67.7 +/- 8.7
  Background counts = 8.3
  Rate = 0.0009 +/- 0.0001

[Sat Oct 22 20:06:41 2011] Off-axis axis estimate = 1.21'
[Sat Oct 22 20:10:32 2011] Using EEF radius (= 0.38 ")to estimate initial spatial extent for simple fitting
[Sat Oct 22 20:10:32 2011] Initial guess for spatial extent in simple fitting = 0.38"
[Sat Oct 22 20:10:32 2011] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.920
[Sat Oct 22 20:10:32 2011] Giving source the simple spatial ID 63 for pass 0, mean size = 0.38"
[Sat Oct 22 20:10:36 2011] fullrun_ccd1_acisf00978_pi14-548_cl_pass0_src63.ximg exists
[Sat Oct 22 20:10:36 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf00978_pi14-548_cl_pass0_src63.csv
[Sat Oct 22 20:10:36 2011] fullrun_ccd1_acisf00978_pi14-548_cl_pass0_src63_1.ximg exists
[Sat Oct 22 20:10:36 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf00978_pi14-548_cl_pass0_src63.csv
[Sat Oct 22 20:10:36 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf00978_pi14-548_cl_pass0_src63_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf00978_pi14-548_cl_pass0_src63.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 22 20:10:39 2011] fullrun_ccd1_acisf00978_pi14-548_cl_pass0_tfrozen_src63.ximg exists
[Sat Oct 22 20:10:39 2011] fullrun_ccd1_acisf00978_pi14-548_cl_pass0_tfrozen_src63_1.ximg exists
[Sat Oct 22 20:10:39 2011] Fit fullrun_ccd1_acisf00978_pi14-548_cl_pass0_tfrozen_src63 appears to have run properly
[Sat Oct 22 20:11:45 2011] Spatial fit model total counts = 89.999900, observed total counts = 90.000000
[Sat Oct 22 20:11:45 2011] Offset between fit and detection position for source 33 = 0.719900 pixels
[Sat Oct 22 20:11:45 2011] 89.897300 total counts/ 16.932400 bgd. counts: snr = 17.731878
Spatial fit parameters:
  Offset between fit and detection position for source 33 = 0.719900 pixels
  Position = (223.0, 143.4) = 18 18 41.44 -13 47 8.2
  Extent = 0.4 (0.4-0.5)", rotation angle = 0
  Source counts = 73.0 +/- 9.5
  Background counts = 16.9
  Rate = 0.0009 +/- 0.0001
[Sat Oct 22 20:11:45 2011] Vigneting correction estimate = 1.000000
[Sat Oct 22 20:11:45 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 22 20:11:45 2011] Assessing source extent using major axis lower bound
[Sat Oct 22 20:11:45 2011] Source does appear to be extended
[Sat Oct 22 20:11:45 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 22 20:13:35 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Oct 22 20:13:35 2011] Initial guess for spatial extent in simple fitting = 0.43"
[Sat Oct 22 20:13:35 2011] source mask rpix=0.9, npix_max = 7, mask sum = 6, frac = 0.788
[Sat Oct 22 20:13:35 2011] Giving source the simple spatial ID 63 for pass 1, mean size = 0.43"
[Sat Oct 22 20:13:39 2011] fullrun_ccd1_acisf00978_pi14-548_cl_pass1_src63.ximg exists
[Sat Oct 22 20:13:39 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf00978_pi14-548_cl_pass1_src63.csv
[Sat Oct 22 20:13:39 2011] fullrun_ccd1_acisf00978_pi14-548_cl_pass1_src63_1.ximg exists
[Sat Oct 22 20:13:39 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf00978_pi14-548_cl_pass1_src63.csv
[Sat Oct 22 20:13:39 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf00978_pi14-548_cl_pass1_src63_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf00978_pi14-548_cl_pass1_src63.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 22 20:13:41 2011] fullrun_ccd1_acisf00978_pi14-548_cl_pass1_tfrozen_src63.ximg exists
[Sat Oct 22 20:13:41 2011] fullrun_ccd1_acisf00978_pi14-548_cl_pass1_tfrozen_src63_1.ximg exists
[Sat Oct 22 20:13:41 2011] Fit fullrun_ccd1_acisf00978_pi14-548_cl_pass1_tfrozen_src63 appears to have run properly
[Sat Oct 22 20:14:46 2011] Spatial fit model total counts = 88.999800, observed total counts = 89.000000
[Sat Oct 22 20:14:46 2011] Offset between fit and detection position for source 33 = 0.006364 pixels
[Sat Oct 22 20:14:46 2011] 88.885900 total counts/ 15.762800 bgd. counts: snr = 18.417807
Spatial fit parameters:
  Offset between fit and detection position for source 33 = 0.006364 pixels
  Position = (223.0, 143.4) = 18 18 41.44 -13 47 8.2
  Extent = 0.4 (0.4-0.5)", rotation angle = 0
  Source counts = 73.1 +/- 9.4
  Background counts = 15.8
  Rate = 0.0009 +/- 0.0001
[Sat Oct 22 20:14:46 2011] Vigneting correction estimate = 1.000000
[Sat Oct 22 20:14:46 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 22 20:14:46 2011] Assessing source extent using major axis lower bound
[Sat Oct 22 20:14:46 2011] Source does appear to be extended
[Sat Oct 22 20:14:46 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 22 20:20:32 2011] Not overwriting source region fullrun_ccd1_acisf00978_pi14-548_pass1_cl_src33_src.reg
[Sat Oct 22 20:20:32 2011] Extracting stamp from image fullrun_ccd1_acisf00978_pi14-548_cl_sm2.00.img.gz, (203, 124) - (243, 163)
[Sat Oct 22 20:20:32 2011] Writing fullrun_ccd1_acisf00978_pi14-548_pass1_cl_src33.gif
[Sat Oct 22 20:23:45 2011] ../../acisf00978/products/events/fullrun_ccd1_acisf00978_pi14-548_pass1_cl_src33_src.evt and ../../acisf00978/products/events/fullrun_ccd1_acisf00978_pi14-548_pass1_cl_src33_bgd.evt exist, delete to re-create
[Sat Oct 22 20:23:45 2011] Size of ../../acisf00978/products/events/fullrun_ccd1_acisf00978_pi14-548_pass1_cl_src33_src.evt.gz[events] = 76 counts
[Sat Oct 22 20:23:45 2011] Mean chipx,y = (26.37, 891.53)
[Sat Oct 22 20:23:45 2011] Mean tdetx,y = (4240.47, 4133.37)
[Sat Oct 22 20:23:45 2011] chipx,y range = (10.00-45.00, 873.00-907.00)
[Sat Oct 22 20:23:45 2011] Size of ../../acisf00978/products/events/fullrun_ccd1_acisf00978_pi14-548_pass1_cl_src33_bgd.evt.gz[events] = 32 counts
[Sat Oct 22 20:23:45 2011] ../../acisf00978/products/images/fullrun_ccd1_acisf00978_pi14-548_pass1_cl_src33_src.img and ../../acisf00978/products/images/fullrun_ccd1_acisf00978_pi14-548_pass1_cl_src33_bgd.img exist, delete to re-create
[Sat Oct 22 20:23:45 2011] ../../acisf00978/products/spectra/fullrun_ccd1_acisf00978_pi14-548_pass1_cl_src33_src.pi and ../../acisf00978/products/spectra/fullrun_ccd1_acisf00978_pi14-548_pass1_cl_src33_bgd.pi exist, delete to re-create
[Sat Oct 22 20:23:45 2011] Not generating rmf since there are only 73 counts
[Sat Oct 22 20:23:48 2011] ../../acisf00978/products/lightcurves/fullrun_ccd1_acisf00978_pi14-548_pass1_cl_src33_src.lc and ../../acisf00978/products/lightcurves/fullrun_ccd1_acisf00978_pi14-548_pass1_cl_src33_bgd.lc exist, delete to re-create
[Sat Oct 22 20:34:31 2011] 206.136
[Sat Oct 22 20:58:19 2011] Updating aperture counts using extracted products
[Sat Oct 22 20:58:19 2011] Error reading totcts from fullrun_ccd1_acisf00978_pi14-548_pass1_cl_src33_src.pi.gz
[Sat Oct 22 20:58:23 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct 22 20:58:23 2011] Using photon index=1.80, rate=0.000948, arf fullrun_ccd1_acisf00978_pi14-548_pass1_cl_src33.arf
[Sat Oct 22 20:58:23 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct 22 20:58:23 2011] Updating source flux to 1.3e-14
[Sat Oct 22 20:59:35 2011] Source 33 has fewer than 100.000000 counts, skipping spectral fitting