[Sat Oct 22 20:06:14 2011] Detection parameters:
  Position = (103.9, 755.3) = 18 18 37.98 -13 50 31.7
  Extent = 0.8" x 0.5", rotation angle = 175 degrees
  Source counts = 11.0 +/- 3.6
  Background counts = 2.0
  Rate = 0.0001 +/- 5e-05

[Sat Oct 22 20:06:17 2011] Off-axis axis estimate = 2.78'
[Sat Oct 22 20:10:26 2011] Using EEF radius (= 0.54 ")to estimate initial spatial extent for simple fitting
[Sat Oct 22 20:10:26 2011] Initial guess for spatial extent in simple fitting = 0.54"
[Sat Oct 22 20:10:26 2011] source mask rpix=1.1, npix_max = 10, mask sum = 9, frac = 0.886
[Sat Oct 22 20:10:26 2011] Giving source the simple spatial ID 45 for pass 0, mean size = 0.54"
[Sat Oct 22 20:10:29 2011] fullrun_ccd0_acisf00978_pi14-548_cl_pass0_src45.ximg exists
[Sat Oct 22 20:10:29 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf00978_pi14-548_cl_pass0_src45.csv
[Sat Oct 22 20:10:29 2011] fullrun_ccd0_acisf00978_pi14-548_cl_pass0_src45_1.ximg exists
[Sat Oct 22 20:10:29 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf00978_pi14-548_cl_pass0_src45.csv
[Sat Oct 22 20:10:29 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf00978_pi14-548_cl_pass0_src45_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf00978_pi14-548_cl_pass0_src45.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 22 20:10:31 2011] fullrun_ccd0_acisf00978_pi14-548_cl_pass0_tfrozen_src45.ximg exists
[Sat Oct 22 20:10:31 2011] fullrun_ccd0_acisf00978_pi14-548_cl_pass0_tfrozen_src45_1.ximg exists
[Sat Oct 22 20:10:31 2011] Fit fullrun_ccd0_acisf00978_pi14-548_cl_pass0_tfrozen_src45 appears to have run properly
[Sat Oct 22 20:11:31 2011] Spatial fit model total counts = 19.972000, observed total counts = 20.000000
[Sat Oct 22 20:11:31 2011] Offset between fit and detection position for source 48 = 1.411276 pixels
[Sat Oct 22 20:11:31 2011] 20.204500 total counts/ 10.191700 bgd. counts: snr = 3.136406
Spatial fit parameters:
  Offset between fit and detection position for source 48 = 1.411276 pixels
  Position = (105.2, 755.7) = 18 18 37.95 -13 50 31.8
  Extent = 0.5 (0.3-0.8)", rotation angle = 0
  Source counts = 10.0 +/- 4.5
  Background counts = 10.2
  Rate = 0.0001 +/- 6e-05
[Sat Oct 22 20:11:31 2011] Vigneting correction estimate = 1.000000
[Sat Oct 22 20:11:31 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 22 20:11:31 2011] Assessing source extent using major axis lower bound
[Sat Oct 22 20:11:31 2011] Source does appear to be extended
[Sat Oct 22 20:11:31 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 22 20:13:30 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Oct 22 20:13:30 2011] Initial guess for spatial extent in simple fitting = 0.53"
[Sat Oct 22 20:13:30 2011] source mask rpix=1.1, npix_max = 10, mask sum = 9, frac = 0.894
[Sat Oct 22 20:13:30 2011] Giving source the simple spatial ID 45 for pass 1, mean size = 0.53"
[Sat Oct 22 20:13:32 2011] fullrun_ccd0_acisf00978_pi14-548_cl_pass1_src45.ximg exists
[Sat Oct 22 20:13:32 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf00978_pi14-548_cl_pass1_src45.csv
[Sat Oct 22 20:13:32 2011] fullrun_ccd0_acisf00978_pi14-548_cl_pass1_src45_1.ximg exists
[Sat Oct 22 20:13:32 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf00978_pi14-548_cl_pass1_src45.csv
[Sat Oct 22 20:13:32 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf00978_pi14-548_cl_pass1_src45_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf00978_pi14-548_cl_pass1_src45.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 22 20:13:34 2011] fullrun_ccd0_acisf00978_pi14-548_cl_pass1_tfrozen_src45.ximg exists
[Sat Oct 22 20:13:34 2011] fullrun_ccd0_acisf00978_pi14-548_cl_pass1_tfrozen_src45_1.ximg exists
[Sat Oct 22 20:13:34 2011] Fit fullrun_ccd0_acisf00978_pi14-548_cl_pass1_tfrozen_src45 appears to have run properly
[Sat Oct 22 20:14:32 2011] Spatial fit model total counts = 16.129900, observed total counts = 17.000000
[Sat Oct 22 20:14:32 2011] Offset between fit and detection position for source 48 = 0.039407 pixels
[Sat Oct 22 20:14:32 2011] 17.012110 total counts/ 6.612310 bgd. counts: snr = 4.044347
Spatial fit parameters:
  Offset between fit and detection position for source 48 = 0.039407 pixels
  Position = (105.2, 755.7) = 18 18 37.96 -13 50 31.8
  Extent = 0.5 (0.4-0.8)", rotation angle = 0
  Source counts = 10.4 +/- 4.1
  Background counts = 6.6
  Rate = 0.0001 +/- 5e-05
[Sat Oct 22 20:14:32 2011] Vigneting correction estimate = 1.000000
[Sat Oct 22 20:14:32 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 22 20:14:32 2011] Assessing source extent using major axis lower bound
[Sat Oct 22 20:14:32 2011] Source does appear to be extended
[Sat Oct 22 20:14:32 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 22 20:16:30 2011] Not overwriting source region fullrun_ccd0_acisf00978_pi14-548_pass1_cl_src48_src.reg
[Sat Oct 22 20:16:30 2011] Extracting stamp from image fullrun_ccd0_acisf00978_pi14-548_cl_sm2.00.img.gz, (81, 731) - (130, 780)
[Sat Oct 22 20:16:30 2011] Writing fullrun_ccd0_acisf00978_pi14-548_pass1_cl_src48.gif
[Sat Oct 22 20:18:42 2011] ../../acisf00978/products/events/fullrun_ccd0_acisf00978_pi14-548_pass1_cl_src48_src.evt and ../../acisf00978/products/events/fullrun_ccd0_acisf00978_pi14-548_pass1_cl_src48_bgd.evt exist, delete to re-create
[Sat Oct 22 20:18:42 2011] Size of ../../acisf00978/products/events/fullrun_ccd0_acisf00978_pi14-548_pass1_cl_src48_src.evt.gz[events] = 12 counts
[Sat Oct 22 20:18:42 2011] Mean chipx,y = (981.08, 756.00)
[Sat Oct 22 20:18:42 2011] Mean tdetx,y = (3817.00, 4150.92)
[Sat Oct 22 20:18:42 2011] chipx,y range = (970.00-1001.00, 738.00-773.00)
[Sat Oct 22 20:18:42 2011] Size of ../../acisf00978/products/events/fullrun_ccd0_acisf00978_pi14-548_pass1_cl_src48_bgd.evt.gz[events] = 20 counts
[Sat Oct 22 20:18:42 2011] ../../acisf00978/products/images/fullrun_ccd0_acisf00978_pi14-548_pass1_cl_src48_src.img and ../../acisf00978/products/images/fullrun_ccd0_acisf00978_pi14-548_pass1_cl_src48_bgd.img exist, delete to re-create
[Sat Oct 22 20:18:42 2011] ../../acisf00978/products/spectra/fullrun_ccd0_acisf00978_pi14-548_pass1_cl_src48_src.pi and ../../acisf00978/products/spectra/fullrun_ccd0_acisf00978_pi14-548_pass1_cl_src48_bgd.pi exist, delete to re-create
[Sat Oct 22 20:18:42 2011] Not generating rmf since there are only 10 counts
[Sat Oct 22 20:18:44 2011] ../../acisf00978/products/lightcurves/fullrun_ccd0_acisf00978_pi14-548_pass1_cl_src48_src.lc and ../../acisf00978/products/lightcurves/fullrun_ccd0_acisf00978_pi14-548_pass1_cl_src48_bgd.lc exist, delete to re-create
[Sat Oct 22 20:20:29 2011] 202.312
[Sat Oct 22 20:58:16 2011] Updating aperture counts using extracted products
[Sat Oct 22 20:58:16 2011] Error reading totcts from fullrun_ccd0_acisf00978_pi14-548_pass1_cl_src48_src.pi.gz
[Sat Oct 22 20:58:17 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct 22 20:58:17 2011] Using photon index=1.80, rate=0.000135, arf fullrun_ccd0_acisf00978_pi14-548_pass1_cl_src48.arf
[Sat Oct 22 20:58:17 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct 22 20:58:17 2011] Updating source flux to 1.9e-15
[Sat Oct 22 20:59:04 2011] Source 48 has fewer than 100.000000 counts, skipping spectral fitting