[Sat Oct 22 20:06:13 2011] Detection parameters:
  Position = (541.3, 1084.3) = 18 18 23.21 -13 47 49.8
  Extent = 0.5" x 0.5", rotation angle = 17 degrees
  Source counts = 55.0 +/- 7.7
  Background counts = 4.0
  Rate = 0.0007 +/- 0.0001

[Sat Oct 22 20:06:17 2011] Off-axis axis estimate = 5.07'
[Sat Oct 22 20:10:26 2011] Using EEF radius (= 1.21 ")to estimate initial spatial extent for simple fitting
[Sat Oct 22 20:10:26 2011] Initial guess for spatial extent in simple fitting = 1.21"
[Sat Oct 22 20:10:26 2011] source mask rpix=2.5, npix_max = 34, mask sum = 36, frac = 1.033
[Sat Oct 22 20:10:26 2011] Giving source the simple spatial ID 30 for pass 0, mean size = 1.21"
[Sat Oct 22 20:10:29 2011] fullrun_ccd0_acisf00978_pi14-548_cl_pass0_src30.ximg exists
[Sat Oct 22 20:10:29 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf00978_pi14-548_cl_pass0_src30.csv
[Sat Oct 22 20:10:29 2011] fullrun_ccd0_acisf00978_pi14-548_cl_pass0_src30_1.ximg exists
[Sat Oct 22 20:10:29 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf00978_pi14-548_cl_pass0_src30.csv
[Sat Oct 22 20:10:29 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf00978_pi14-548_cl_pass0_src30_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf00978_pi14-548_cl_pass0_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 22 20:10:31 2011] fullrun_ccd0_acisf00978_pi14-548_cl_pass0_tfrozen_src30.ximg exists
[Sat Oct 22 20:10:31 2011] fullrun_ccd0_acisf00978_pi14-548_cl_pass0_tfrozen_src30_1.ximg exists
[Sat Oct 22 20:10:31 2011] Fit fullrun_ccd0_acisf00978_pi14-548_cl_pass0_tfrozen_src30 appears to have run properly
[Sat Oct 22 20:11:31 2011] Spatial fit model total counts = 69.041400, observed total counts = 70.000000
[Sat Oct 22 20:11:31 2011] Offset between fit and detection position for source 30 = 0.856355 pixels
[Sat Oct 22 20:11:31 2011] 69.772200 total counts/ 18.511700 bgd. counts: snr = 11.914057
Spatial fit parameters:
  Offset between fit and detection position for source 30 = 0.856355 pixels
  Position = (541.6, 1085.1) = 18 18 23.22 -13 47 49.6
  Extent = 0.9 (0.6-1.1)", rotation angle = 0
  Source counts = 51.3 +/- 8.4
  Background counts = 18.5
  Rate = 0.0007 +/- 0.0001
[Sat Oct 22 20:11:31 2011] Vigneting correction estimate = 1.000000
[Sat Oct 22 20:11:31 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 22 20:11:31 2011] Assessing source extent using major axis lower bound
[Sat Oct 22 20:11:31 2011] Source does appear to be extended
[Sat Oct 22 20:11:31 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 22 20:13:30 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Oct 22 20:13:30 2011] Initial guess for spatial extent in simple fitting = 0.89"
[Sat Oct 22 20:13:30 2011] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.937
[Sat Oct 22 20:13:30 2011] Giving source the simple spatial ID 30 for pass 1, mean size = 0.89"
[Sat Oct 22 20:13:32 2011] fullrun_ccd0_acisf00978_pi14-548_cl_pass1_src30.ximg exists
[Sat Oct 22 20:13:32 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd0_acisf00978_pi14-548_cl_pass1_src30.csv
[Sat Oct 22 20:13:32 2011] fullrun_ccd0_acisf00978_pi14-548_cl_pass1_src30_1.ximg exists
[Sat Oct 22 20:13:32 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd0_acisf00978_pi14-548_cl_pass1_src30.csv
[Sat Oct 22 20:13:32 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf00978_pi14-548_cl_pass1_src30_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf00978_pi14-548_cl_pass1_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 22 20:13:34 2011] fullrun_ccd0_acisf00978_pi14-548_cl_pass1_tfrozen_src30.ximg exists
[Sat Oct 22 20:13:34 2011] fullrun_ccd0_acisf00978_pi14-548_cl_pass1_tfrozen_src30_1.ximg exists
[Sat Oct 22 20:13:34 2011] Fit fullrun_ccd0_acisf00978_pi14-548_cl_pass1_tfrozen_src30 appears to have run properly
[Sat Oct 22 20:14:32 2011] Spatial fit model total counts = 67.492500, observed total counts = 68.000000
[Sat Oct 22 20:14:32 2011] Offset between fit and detection position for source 30 = 0.124072 pixels
[Sat Oct 22 20:14:32 2011] 67.872000 total counts/ 12.892300 bgd. counts: snr = 15.312185
Spatial fit parameters:
  Offset between fit and detection position for source 30 = 0.124072 pixels
  Position = (541.7, 1085.2) = 18 18 23.21 -13 47 49.6
  Extent = 0.9 (0.7-1.2)", rotation angle = 0
  Source counts = 55.0 +/- 8.2
  Background counts = 12.9
  Rate = 0.0007 +/- 0.0001
[Sat Oct 22 20:14:32 2011] Vigneting correction estimate = 1.000000
[Sat Oct 22 20:14:32 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 22 20:14:32 2011] Assessing source extent using major axis lower bound
[Sat Oct 22 20:14:32 2011] Source does appear to be extended
[Sat Oct 22 20:14:32 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 22 20:16:30 2011] Not overwriting source region fullrun_ccd0_acisf00978_pi14-548_pass1_cl_src30_src.reg
[Sat Oct 22 20:16:30 2011] Extracting stamp from image fullrun_ccd0_acisf00978_pi14-548_cl_sm2.00.img.gz, (499, 1042) - (585, 1128)
[Sat Oct 22 20:16:30 2011] Writing fullrun_ccd0_acisf00978_pi14-548_pass1_cl_src30.gif
[Sat Oct 22 20:17:58 2011] ../../acisf00978/products/events/fullrun_ccd0_acisf00978_pi14-548_pass1_cl_src30_src.evt and ../../acisf00978/products/events/fullrun_ccd0_acisf00978_pi14-548_pass1_cl_src30_bgd.evt exist, delete to re-create
[Sat Oct 22 20:17:58 2011] Size of ../../acisf00978/products/events/fullrun_ccd0_acisf00978_pi14-548_pass1_cl_src30_src.evt.gz[events] = 66 counts
[Sat Oct 22 20:17:58 2011] Mean chipx,y = (486.88, 983.36)
[Sat Oct 22 20:17:58 2011] Mean tdetx,y = (4044.36, 4645.12)
[Sat Oct 22 20:17:58 2011] chipx,y range = (467.00-506.00, 963.00-1001.00)
[Sat Oct 22 20:17:58 2011] Size of ../../acisf00978/products/events/fullrun_ccd0_acisf00978_pi14-548_pass1_cl_src30_bgd.evt.gz[events] = 55 counts
[Sat Oct 22 20:17:58 2011] ../../acisf00978/products/images/fullrun_ccd0_acisf00978_pi14-548_pass1_cl_src30_src.img and ../../acisf00978/products/images/fullrun_ccd0_acisf00978_pi14-548_pass1_cl_src30_bgd.img exist, delete to re-create
[Sat Oct 22 20:17:58 2011] ../../acisf00978/products/spectra/fullrun_ccd0_acisf00978_pi14-548_pass1_cl_src30_src.pi and ../../acisf00978/products/spectra/fullrun_ccd0_acisf00978_pi14-548_pass1_cl_src30_bgd.pi exist, delete to re-create
[Sat Oct 22 20:17:58 2011] Not generating rmf since there are only 54 counts
[Sat Oct 22 20:18:01 2011] ../../acisf00978/products/lightcurves/fullrun_ccd0_acisf00978_pi14-548_pass1_cl_src30_src.lc and ../../acisf00978/products/lightcurves/fullrun_ccd0_acisf00978_pi14-548_pass1_cl_src30_bgd.lc exist, delete to re-create
[Sat Oct 22 20:20:28 2011] 189.642
[Sat Oct 22 20:58:16 2011] Updating aperture counts using extracted products
[Sat Oct 22 20:58:16 2011] Error reading totcts from fullrun_ccd0_acisf00978_pi14-548_pass1_cl_src30_src.pi.gz
[Sat Oct 22 20:58:17 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct 22 20:58:17 2011] Using photon index=1.80, rate=0.000713, arf fullrun_ccd0_acisf00978_pi14-548_pass1_cl_src30.arf
[Sat Oct 22 20:58:17 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct 22 20:58:17 2011] Updating source flux to 1.1e-14
[Sat Oct 22 20:59:04 2011] Source 30 has fewer than 100.000000 counts, skipping spectral fitting