[Sat Oct 22 20:06:11 2011] Detection parameters:
  Position = (911.7, 840.6) = 18 18 10.70 -13 49 49.6
  Extent = 1.6" x 1.3", rotation angle = 161 degrees
  Source counts = 402.9 +/- 21.5
  Background counts = 61.1
  Rate = 0.005 +/- 0.0003

[Sat Oct 22 20:06:17 2011] Off-axis axis estimate = 8.26'
[Sat Oct 22 20:10:26 2011] Using EEF radius (= 3.02 ")to estimate initial spatial extent for simple fitting
[Sat Oct 22 20:10:26 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Oct 22 20:10:26 2011] Initial guess for spatial extent in simple fitting = 3.02"
[Sat Oct 22 20:10:26 2011] source mask rpix=6.1, npix_max = 175, mask sum = 169, frac = 0.962
[Sat Oct 22 20:10:26 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 3.02"
[Sat Oct 22 20:10:28 2011] fullrun_ccd0_acisf00978_pi14-548_cl_pass0_src3.ximg exists
[Sat Oct 22 20:10:28 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd0_acisf00978_pi14-548_cl_pass0_src3.csv
[Sat Oct 22 20:10:28 2011] fullrun_ccd0_acisf00978_pi14-548_cl_pass0_src3_1.ximg exists
[Sat Oct 22 20:10:28 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd0_acisf00978_pi14-548_cl_pass0_src3.csv
[Sat Oct 22 20:10:28 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf00978_pi14-548_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf00978_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 22 20:10:30 2011] fullrun_ccd0_acisf00978_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Sat Oct 22 20:10:30 2011] fullrun_ccd0_acisf00978_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Sat Oct 22 20:10:30 2011] Fit fullrun_ccd0_acisf00978_pi14-548_cl_pass0_tfrozen_src3 appears to have run properly
[Sat Oct 22 20:11:31 2011] Spatial fit model total counts = 499.950000, observed total counts = 507.000000
[Sat Oct 22 20:11:31 2011] Offset between fit and detection position for source 3 = 0.883270 pixels
[Sat Oct 22 20:11:31 2011] 501.862000 total counts/ 113.703000 bgd. counts: snr = 36.401870
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.883270 pixels
  Position = (912.5, 841.0) = 18 18 10.69 -13 49 49.7
  Extent = 2.8 (2.4-3.1)", rotation angle = 0
  Source counts = 388.2 +/- 22.4
  Background counts = 113.7
  Rate = 0.005 +/- 0.0003
[Sat Oct 22 20:11:31 2011] Vigneting correction estimate = 1.000000
[Sat Oct 22 20:11:31 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 22 20:11:31 2011] Assessing source extent using major axis lower bound
[Sat Oct 22 20:11:31 2011] Source does appear to be extended
[Sat Oct 22 20:11:31 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 22 20:13:30 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Oct 22 20:13:30 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Oct 22 20:13:30 2011] Initial guess for spatial extent in simple fitting = 2.75"
[Sat Oct 22 20:13:30 2011] source mask rpix=5.6, npix_max = 148, mask sum = 156, frac = 1.049
[Sat Oct 22 20:13:30 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 2.75"
[Sat Oct 22 20:13:32 2011] fullrun_ccd0_acisf00978_pi14-548_cl_pass1_src3.ximg exists
[Sat Oct 22 20:13:32 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf00978_pi14-548_cl_pass1_src3.csv
[Sat Oct 22 20:13:32 2011] fullrun_ccd0_acisf00978_pi14-548_cl_pass1_src3_1.ximg exists
[Sat Oct 22 20:13:32 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf00978_pi14-548_cl_pass1_src3.csv
[Sat Oct 22 20:13:32 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf00978_pi14-548_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf00978_pi14-548_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 22 20:13:33 2011] fullrun_ccd0_acisf00978_pi14-548_cl_pass1_tfrozen_src3.ximg exists
[Sat Oct 22 20:13:33 2011] fullrun_ccd0_acisf00978_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists
[Sat Oct 22 20:13:33 2011] Fit fullrun_ccd0_acisf00978_pi14-548_cl_pass1_tfrozen_src3 appears to have run properly
[Sat Oct 22 20:14:32 2011] Spatial fit model total counts = 482.659000, observed total counts = 490.000000
[Sat Oct 22 20:14:32 2011] Offset between fit and detection position for source 3 = 0.130602 pixels
[Sat Oct 22 20:14:32 2011] 484.622300 total counts/ 89.933300 bgd. counts: snr = 41.619299
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.130602 pixels
  Position = (912.6, 840.9) = 18 18 10.68 -13 49 49.7
  Extent = 2.8 (2.4-3.2)", rotation angle = 0
  Source counts = 394.7 +/- 22.0
  Background counts = 89.9
  Rate = 0.005 +/- 0.0003
[Sat Oct 22 20:14:32 2011] Vigneting correction estimate = 1.000000
[Sat Oct 22 20:14:32 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 22 20:14:32 2011] Assessing source extent using major axis lower bound
[Sat Oct 22 20:14:32 2011] Source does appear to be extended
[Sat Oct 22 20:14:32 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 22 20:16:29 2011] Not overwriting source region fullrun_ccd0_acisf00978_pi14-548_pass1_cl_src3_src.reg
[Sat Oct 22 20:16:29 2011] Extracting stamp from image fullrun_ccd0_acisf00978_pi14-548_cl_sm2.00.img.gz, (785, 713) - (1040, 969)
[Sat Oct 22 20:16:29 2011] Writing fullrun_ccd0_acisf00978_pi14-548_pass1_cl_src3.gif
[Sat Oct 22 20:16:41 2011] ../../acisf00978/products/events/fullrun_ccd0_acisf00978_pi14-548_pass1_cl_src3_src.evt and ../../acisf00978/products/events/fullrun_ccd0_acisf00978_pi14-548_pass1_cl_src3_bgd.evt exist, delete to re-create
[Sat Oct 22 20:16:41 2011] Size of ../../acisf00978/products/events/fullrun_ccd0_acisf00978_pi14-548_pass1_cl_src3_src.evt.gz[events] = 532 counts
[Sat Oct 22 20:16:41 2011] Mean chipx,y = (175.85, 664.52)
[Sat Oct 22 20:16:41 2011] Mean tdetx,y = (3725.52, 4956.15)
[Sat Oct 22 20:16:41 2011] chipx,y range = (140.00-211.00, 633.00-699.00)
[Sat Oct 22 20:16:41 2011] Size of ../../acisf00978/products/events/fullrun_ccd0_acisf00978_pi14-548_pass1_cl_src3_bgd.evt.gz[events] = 384 counts
[Sat Oct 22 20:16:41 2011] ../../acisf00978/products/images/fullrun_ccd0_acisf00978_pi14-548_pass1_cl_src3_src.img and ../../acisf00978/products/images/fullrun_ccd0_acisf00978_pi14-548_pass1_cl_src3_bgd.img exist, delete to re-create
[Sat Oct 22 20:16:41 2011] ../../acisf00978/products/spectra/fullrun_ccd0_acisf00978_pi14-548_pass1_cl_src3_src.pi and ../../acisf00978/products/spectra/fullrun_ccd0_acisf00978_pi14-548_pass1_cl_src3_bgd.pi exist, delete to re-create
[Sat Oct 22 20:16:44 2011] ../../acisf00978/products/lightcurves/fullrun_ccd0_acisf00978_pi14-548_pass1_cl_src3_src.lc and ../../acisf00978/products/lightcurves/fullrun_ccd0_acisf00978_pi14-548_pass1_cl_src3_bgd.lc exist, delete to re-create
[Sat Oct 22 20:20:27 2011] Keeping rmf generated by specextract
[Sat Oct 22 20:20:27 2011] 174.271
[Sat Oct 22 20:58:15 2011] Updating aperture counts using extracted products
[Sat Oct 22 20:58:15 2011] Error reading totcts from fullrun_ccd0_acisf00978_pi14-548_pass1_cl_src3_src.pi.gz
[Sat Oct 22 20:58:17 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct 22 20:58:17 2011] Using photon index=1.80, rate=0.00512, arf fullrun_ccd0_acisf00978_pi14-548_pass1_cl_src3.arf
[Sat Oct 22 20:58:17 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct 22 20:58:17 2011] Updating source flux to 8.1e-14