[Fri Sep 23 15:03:44 2011] Detection parameters:
  Position = (151.2, 479.2) = 6 41 39.62 9 33 19.4
  Extent = 1.9" x 1.0", rotation angle = 72 degrees
  Source counts = 101.6 +/- 10.4
  Background counts = 6.4
  Rate = 0.004 +/- 0.0004

[Fri Sep 23 15:03:52 2011] Off-axis axis estimate = 7.66'
[Fri Sep 23 15:06:09 2011] Using EEF radius (= 2.60 ")to estimate initial spatial extent for simple fitting
[Fri Sep 23 15:06:09 2011] Initial guess for spatial extent in simple fitting = 2.60"
[Fri Sep 23 15:06:09 2011] source mask rpix=5.3, npix_max = 133, mask sum = 144, frac = 1.076
[Fri Sep 23 15:06:09 2011] Giving source the simple spatial ID 7 for pass 0, mean size = 2.60"
[Fri Sep 23 15:06:14 2011] fullrun_ccd3_acisf09768_pi14-548_cl_pass0_src7.ximg exists
[Fri Sep 23 15:06:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf09768_pi14-548_cl_pass0_src7.csv
[Fri Sep 23 15:06:14 2011] fullrun_ccd3_acisf09768_pi14-548_cl_pass0_src7_1.ximg exists
[Fri Sep 23 15:06:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf09768_pi14-548_cl_pass0_src7.csv
[Fri Sep 23 15:06:14 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf09768_pi14-548_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf09768_pi14-548_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 23 15:06:17 2011] fullrun_ccd3_acisf09768_pi14-548_cl_pass0_tfrozen_src7.ximg exists
[Fri Sep 23 15:06:17 2011] fullrun_ccd3_acisf09768_pi14-548_cl_pass0_tfrozen_src7_1.ximg exists
[Fri Sep 23 15:06:17 2011] Fit fullrun_ccd3_acisf09768_pi14-548_cl_pass0_tfrozen_src7 appears to have run properly
[Fri Sep 23 15:07:07 2011] Spatial fit model total counts = 120.081000, observed total counts = 121.000000
[Fri Sep 23 15:07:07 2011] Offset between fit and detection position for source 2 = 0.514277 pixels
[Fri Sep 23 15:07:07 2011] 120.380200 total counts/ 32.319800 bgd. counts: snr = 15.489818
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.514277 pixels
  Position = (151.6, 479.4) = 6 41 39.62 9 33 19.3
  Extent = 1.6 (1.3-1.9)", rotation angle = 0
  Source counts = 88.1 +/- 11.0
  Background counts = 32.3
  Rate = 0.003 +/- 0.0004
[Fri Sep 23 15:07:07 2011] Vigneting correction estimate = 1.000000
[Fri Sep 23 15:07:07 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 23 15:07:07 2011] Assessing source extent using major axis lower bound
[Fri Sep 23 15:07:07 2011] Source does appear to be extended
[Fri Sep 23 15:07:07 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 23 15:08:23 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Sep 23 15:08:23 2011] Initial guess for spatial extent in simple fitting = 1.62"
[Fri Sep 23 15:08:23 2011] source mask rpix=3.3, npix_max = 57, mask sum = 49, frac = 0.851
[Fri Sep 23 15:08:23 2011] Giving source the simple spatial ID 7 for pass 1, mean size = 1.62"
[Fri Sep 23 15:08:24 2011] fullrun_ccd3_acisf09768_pi14-548_cl_pass1_src7.ximg exists
[Fri Sep 23 15:08:24 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf09768_pi14-548_cl_pass1_src7.csv
[Fri Sep 23 15:08:24 2011] fullrun_ccd3_acisf09768_pi14-548_cl_pass1_src7_1.ximg exists
[Fri Sep 23 15:08:24 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf09768_pi14-548_cl_pass1_src7.csv
[Fri Sep 23 15:08:24 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf09768_pi14-548_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf09768_pi14-548_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 23 15:08:27 2011] fullrun_ccd3_acisf09768_pi14-548_cl_pass1_tfrozen_src7.ximg exists
[Fri Sep 23 15:08:27 2011] fullrun_ccd3_acisf09768_pi14-548_cl_pass1_tfrozen_src7_1.ximg exists
[Fri Sep 23 15:08:27 2011] Fit fullrun_ccd3_acisf09768_pi14-548_cl_pass1_tfrozen_src7 appears to have run properly
[Fri Sep 23 15:09:05 2011] Spatial fit model total counts = 101.897000, observed total counts = 102.000000
[Fri Sep 23 15:09:05 2011] Offset between fit and detection position for source 2 = 1.525744 pixels
[Fri Sep 23 15:09:05 2011] 102.584300 total counts/ 54.102600 bgd. counts: snr = 6.591265
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 1.525744 pixels
  Position = (151.8, 481.0) = 6 41 39.62 9 33 20.0
  Extent = 0.8 (0.6-1.6)", rotation angle = 0
  Source counts = 48.5 +/- 10.1
  Background counts = 54.1
  Rate = 0.002 +/- 0.0004
[Fri Sep 23 15:09:05 2011] Vigneting correction estimate = 1.000000
[Fri Sep 23 15:09:05 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 23 15:09:05 2011] Assessing source extent using major axis lower bound
[Fri Sep 23 15:09:05 2011] Source does appear to be extended
[Fri Sep 23 15:09:05 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 23 15:22:07 2011] Not overwriting source region fullrun_ccd3_acisf09768_pi14-548_pass1_cl_src2_src.reg
[Fri Sep 23 15:22:07 2011] Extracting stamp from image fullrun_ccd3_acisf09768_pi14-548_cl_sm2.00.img.gz, (115, 444) - (189, 518)
[Fri Sep 23 15:22:07 2011] Writing fullrun_ccd3_acisf09768_pi14-548_pass1_cl_src2.gif
[Fri Sep 23 15:22:33 2011] ../../acisf09768/products/events/fullrun_ccd3_acisf09768_pi14-548_pass1_cl_src2_src.evt and ../../acisf09768/products/events/fullrun_ccd3_acisf09768_pi14-548_pass1_cl_src2_bgd.evt exist, delete to re-create
[Fri Sep 23 15:22:33 2011] Size of ../../acisf09768/products/events/fullrun_ccd3_acisf09768_pi14-548_pass1_cl_src2_src.evt.gz[events] = 76 counts
[Fri Sep 23 15:22:33 2011] Mean chipx,y = (139.03, 558.51)
[Fri Sep 23 15:22:33 2011] Mean tdetx,y = (4573.49, 3200.03)
[Fri Sep 23 15:22:33 2011] chipx,y range = (120.00-156.00, 540.00-580.00)
[Fri Sep 23 15:22:34 2011] Size of ../../acisf09768/products/events/fullrun_ccd3_acisf09768_pi14-548_pass1_cl_src2_bgd.evt.gz[events] = 38 counts
[Fri Sep 23 15:22:34 2011] ../../acisf09768/products/images/fullrun_ccd3_acisf09768_pi14-548_pass1_cl_src2_src.img and ../../acisf09768/products/images/fullrun_ccd3_acisf09768_pi14-548_pass1_cl_src2_bgd.img exist, delete to re-create
[Fri Sep 23 15:22:34 2011] ../../acisf09768/products/spectra/fullrun_ccd3_acisf09768_pi14-548_pass1_cl_src2_src.pi and ../../acisf09768/products/spectra/fullrun_ccd3_acisf09768_pi14-548_pass1_cl_src2_bgd.pi exist, delete to re-create
[Fri Sep 23 15:22:34 2011] Not generating rmf since there are only 48 counts
[Fri Sep 23 15:22:38 2011] ../../acisf09768/products/lightcurves/fullrun_ccd3_acisf09768_pi14-548_pass1_cl_src2_src.lc and ../../acisf09768/products/lightcurves/fullrun_ccd3_acisf09768_pi14-548_pass1_cl_src2_bgd.lc exist, delete to re-create
[Fri Sep 23 15:25:32 2011] 168.075
[Fri Sep 23 15:25:48 2011] Updating aperture counts using extracted products
[Fri Sep 23 15:25:48 2011] Error reading totcts from fullrun_ccd3_acisf09768_pi14-548_pass1_cl_src2_src.pi.gz
[Fri Sep 23 15:25:49 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 23 15:25:49 2011] Using photon index=1.80, rate=0.00174, arf fullrun_ccd3_acisf09768_pi14-548_pass1_cl_src2.arf
[Fri Sep 23 15:25:49 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Sep 23 15:25:49 2011] Updating source flux to 2.5e-14
[Fri Sep 23 15:27:19 2011] Source 2 has fewer than 100.000000 counts, skipping spectral fitting