[Fri Sep 23 15:03:46 2011] Detection parameters:
  Position = (644.3, 147.3) = 6 41 23.22 9 30 36.2
  Extent = 0.5" x 0.5", rotation angle = 5 degrees
  Source counts = 27.4 +/- 5.3
  Background counts = 0.6
  Rate = 0.001 +/- 0.0002

[Fri Sep 23 15:03:52 2011] Off-axis axis estimate = 2.83'
[Fri Sep 23 15:06:09 2011] Using EEF radius (= 0.55 ")to estimate initial spatial extent for simple fitting
[Fri Sep 23 15:06:09 2011] Initial guess for spatial extent in simple fitting = 0.55"
[Fri Sep 23 15:06:09 2011] source mask rpix=1.1, npix_max = 10, mask sum = 9, frac = 0.866
[Fri Sep 23 15:06:09 2011] Giving source the simple spatial ID 25 for pass 0, mean size = 0.55"
[Fri Sep 23 15:06:16 2011] fullrun_ccd3_acisf09768_pi14-548_cl_pass0_src25.ximg exists
[Fri Sep 23 15:06:16 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf09768_pi14-548_cl_pass0_src25.csv
[Fri Sep 23 15:06:16 2011] fullrun_ccd3_acisf09768_pi14-548_cl_pass0_src25_1.ximg exists
[Fri Sep 23 15:06:16 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf09768_pi14-548_cl_pass0_src25.csv
[Fri Sep 23 15:06:16 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf09768_pi14-548_cl_pass0_src25_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf09768_pi14-548_cl_pass0_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 23 15:06:19 2011] fullrun_ccd3_acisf09768_pi14-548_cl_pass0_tfrozen_src25.ximg exists
[Fri Sep 23 15:06:19 2011] fullrun_ccd3_acisf09768_pi14-548_cl_pass0_tfrozen_src25_1.ximg exists
[Fri Sep 23 15:06:19 2011] Fit fullrun_ccd3_acisf09768_pi14-548_cl_pass0_tfrozen_src25 appears to have run properly
[Fri Sep 23 15:07:07 2011] Spatial fit model total counts = 27.123600, observed total counts = 28.000000
[Fri Sep 23 15:07:07 2011] Offset between fit and detection position for source 18 = 0.711577 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 0.711577 pixels
  Position = (644.8, 147.8) = 6 41 23.22 9 30 36.2
  Extent = 0.5 (0.4-0.6)", rotation angle = 0
  Source counts = 27.1 +/- 5.2
  Background counts = 0.0
  Rate = 0.001 +/- 0.0002
[Fri Sep 23 15:07:07 2011] Vigneting correction estimate = 1.000000
[Fri Sep 23 15:07:07 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 23 15:07:07 2011] Assessing source extent using major axis lower bound
[Fri Sep 23 15:07:07 2011] Source does appear to be extended
[Fri Sep 23 15:07:07 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 23 15:08:23 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Sep 23 15:08:23 2011] Initial guess for spatial extent in simple fitting = 0.52"
[Fri Sep 23 15:08:23 2011] source mask rpix=1.1, npix_max = 9, mask sum = 9, frac = 0.923
[Fri Sep 23 15:08:23 2011] Giving source the simple spatial ID 25 for pass 1, mean size = 0.52"
[Fri Sep 23 15:08:24 2011] fullrun_ccd3_acisf09768_pi14-548_cl_pass1_src25.ximg exists
[Fri Sep 23 15:08:24 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf09768_pi14-548_cl_pass1_src25.csv
[Fri Sep 23 15:08:24 2011] fullrun_ccd3_acisf09768_pi14-548_cl_pass1_src25_1.ximg exists
[Fri Sep 23 15:08:24 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf09768_pi14-548_cl_pass1_src25.csv
[Fri Sep 23 15:08:24 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf09768_pi14-548_cl_pass1_src25_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf09768_pi14-548_cl_pass1_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 23 15:08:28 2011] fullrun_ccd3_acisf09768_pi14-548_cl_pass1_tfrozen_src25.ximg exists
[Fri Sep 23 15:08:28 2011] fullrun_ccd3_acisf09768_pi14-548_cl_pass1_tfrozen_src25_1.ximg exists
[Fri Sep 23 15:08:28 2011] Fit fullrun_ccd3_acisf09768_pi14-548_cl_pass1_tfrozen_src25 appears to have run properly
[Fri Sep 23 15:09:05 2011] Spatial fit model total counts = 28.209200, observed total counts = 28.000000
[Fri Sep 23 15:09:05 2011] Offset between fit and detection position for source 18 = 0.062154 pixels
[Fri Sep 23 15:09:05 2011] 28.231661 total counts/ 0.000161 bgd. counts: snr = 2223.249135
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 0.062154 pixels
  Position = (644.8, 147.8) = 6 41 23.22 9 30 36.2
  Extent = 0.5 (0.4-0.6)", rotation angle = 0
  Source counts = 28.2 +/- 5.3
  Background counts = 0.0
  Rate = 0.001 +/- 0.0002
[Fri Sep 23 15:09:05 2011] Vigneting correction estimate = 1.000000
[Fri Sep 23 15:09:05 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 23 15:09:05 2011] Assessing source extent using major axis lower bound
[Fri Sep 23 15:09:05 2011] Source does appear to be extended
[Fri Sep 23 15:09:05 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 23 15:22:08 2011] Not overwriting source region fullrun_ccd3_acisf09768_pi14-548_pass1_cl_src18_src.reg
[Fri Sep 23 15:22:08 2011] Extracting stamp from image fullrun_ccd3_acisf09768_pi14-548_cl_sm2.00.img.gz, (621, 124) - (668, 171)
[Fri Sep 23 15:22:08 2011] Writing fullrun_ccd3_acisf09768_pi14-548_pass1_cl_src18.gif
[Fri Sep 23 15:23:40 2011] ../../acisf09768/products/events/fullrun_ccd3_acisf09768_pi14-548_pass1_cl_src18_src.evt and ../../acisf09768/products/events/fullrun_ccd3_acisf09768_pi14-548_pass1_cl_src18_bgd.evt exist, delete to re-create
[Fri Sep 23 15:23:40 2011] Size of ../../acisf09768/products/events/fullrun_ccd3_acisf09768_pi14-548_pass1_cl_src18_src.evt.gz[events] = 28 counts
[Fri Sep 23 15:23:40 2011] Mean chipx,y = (633.86, 892.57)
[Fri Sep 23 15:23:40 2011] Mean tdetx,y = (4239.43, 3694.86)
[Fri Sep 23 15:23:40 2011] chipx,y range = (618.00-652.00, 875.00-907.00)
[Fri Sep 23 15:23:40 2011] Size of ../../acisf09768/products/events/fullrun_ccd3_acisf09768_pi14-548_pass1_cl_src18_bgd.evt.gz[events] = 4 counts
[Fri Sep 23 15:23:40 2011] ../../acisf09768/products/images/fullrun_ccd3_acisf09768_pi14-548_pass1_cl_src18_src.img and ../../acisf09768/products/images/fullrun_ccd3_acisf09768_pi14-548_pass1_cl_src18_bgd.img exist, delete to re-create
[Fri Sep 23 15:23:40 2011] ../../acisf09768/products/spectra/fullrun_ccd3_acisf09768_pi14-548_pass1_cl_src18_src.pi and ../../acisf09768/products/spectra/fullrun_ccd3_acisf09768_pi14-548_pass1_cl_src18_bgd.pi exist, delete to re-create
[Fri Sep 23 15:23:40 2011] Not generating rmf since there are only 28 counts
[Fri Sep 23 15:23:43 2011] ../../acisf09768/products/lightcurves/fullrun_ccd3_acisf09768_pi14-548_pass1_cl_src18_src.lc and ../../acisf09768/products/lightcurves/fullrun_ccd3_acisf09768_pi14-548_pass1_cl_src18_bgd.lc exist, delete to re-create
[Fri Sep 23 15:25:33 2011] 179.297
[Fri Sep 23 15:25:48 2011] Updating aperture counts using extracted products
[Fri Sep 23 15:25:48 2011] Error reading totcts from fullrun_ccd3_acisf09768_pi14-548_pass1_cl_src18_src.pi.gz
[Fri Sep 23 15:25:49 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 23 15:25:49 2011] Using photon index=1.80, rate=0.00102, arf fullrun_ccd3_acisf09768_pi14-548_pass1_cl_src18.arf
[Fri Sep 23 15:25:49 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Sep 23 15:25:49 2011] Updating source flux to 1.4e-14
[Fri Sep 23 15:27:19 2011] Source 18 has fewer than 100.000000 counts, skipping spectral fitting