[Fri Sep 23 15:03:46 2011] Detection parameters:
  Position = (1032.8, 490.5) = 6 41 10.29 9 33 25.0
  Extent = 0.5" x 0.5", rotation angle = 34 degrees
  Source counts = 43.5 +/- 6.6
  Background counts = 0.5
  Rate = 0.002 +/- 0.0002

[Fri Sep 23 15:03:52 2011] Off-axis axis estimate = 3.92'
[Fri Sep 23 15:06:09 2011] Using EEF radius (= 0.80 ")to estimate initial spatial extent for simple fitting
[Fri Sep 23 15:06:09 2011] Initial guess for spatial extent in simple fitting = 0.80"
[Fri Sep 23 15:06:09 2011] source mask rpix=1.6, npix_max = 18, mask sum = 20, frac = 1.096
[Fri Sep 23 15:06:09 2011] Giving source the simple spatial ID 16 for pass 0, mean size = 0.80"
[Fri Sep 23 15:06:15 2011] fullrun_ccd3_acisf09768_pi14-548_cl_pass0_src16.ximg exists
[Fri Sep 23 15:06:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf09768_pi14-548_cl_pass0_src16.csv
[Fri Sep 23 15:06:15 2011] fullrun_ccd3_acisf09768_pi14-548_cl_pass0_src16_1.ximg exists
[Fri Sep 23 15:06:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf09768_pi14-548_cl_pass0_src16.csv
[Fri Sep 23 15:06:15 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf09768_pi14-548_cl_pass0_src16_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf09768_pi14-548_cl_pass0_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 23 15:06:19 2011] fullrun_ccd3_acisf09768_pi14-548_cl_pass0_tfrozen_src16.ximg exists
[Fri Sep 23 15:06:19 2011] fullrun_ccd3_acisf09768_pi14-548_cl_pass0_tfrozen_src16_1.ximg exists
[Fri Sep 23 15:06:19 2011] Fit fullrun_ccd3_acisf09768_pi14-548_cl_pass0_tfrozen_src16 appears to have run properly
[Fri Sep 23 15:07:07 2011] Spatial fit model total counts = 51.418000, observed total counts = 45.000000
[Fri Sep 23 15:07:07 2011] Offset between fit and detection position for source 13 = 1.007919 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 1.007919 pixels
  Position = (1033.6, 491.1) = 6 41 10.28 9 33 25.1
  Extent = 1.0 (0.7-1.4)" x 0.4 (0.4-0.5)", rotation angle = 333 (321-346) degrees
  Source counts = 51.6 +/- 7.2
  Background counts = 0.0
  Rate = 0.002 +/- 0.0003
[Fri Sep 23 15:07:07 2011] Vigneting correction estimate = 1.000000
[Fri Sep 23 15:07:07 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 23 15:07:07 2011] Assessing source extent using major axis lower bound
[Fri Sep 23 15:07:07 2011] Source does appear to be extended
[Fri Sep 23 15:07:07 2011] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.36
[Fri Sep 23 15:08:23 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Sep 23 15:08:23 2011] Initial guess for spatial extent in simple fitting = 0.73"
[Fri Sep 23 15:08:23 2011] source mask rpix=1.5, npix_max = 15, mask sum = 16, frac = 1.018
[Fri Sep 23 15:08:23 2011] Giving source the simple spatial ID 16 for pass 1, mean size = 0.73"
[Fri Sep 23 15:08:24 2011] fullrun_ccd3_acisf09768_pi14-548_cl_pass1_src16.ximg exists
[Fri Sep 23 15:08:24 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf09768_pi14-548_cl_pass1_src16.csv
[Fri Sep 23 15:08:24 2011] fullrun_ccd3_acisf09768_pi14-548_cl_pass1_src16_1.ximg exists
[Fri Sep 23 15:08:24 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf09768_pi14-548_cl_pass1_src16.csv
[Fri Sep 23 15:08:24 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf09768_pi14-548_cl_pass1_src16_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf09768_pi14-548_cl_pass1_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 23 15:08:28 2011] fullrun_ccd3_acisf09768_pi14-548_cl_pass1_tfrozen_src16.ximg exists
[Fri Sep 23 15:08:28 2011] fullrun_ccd3_acisf09768_pi14-548_cl_pass1_tfrozen_src16_1.ximg exists
[Fri Sep 23 15:08:28 2011] Fit fullrun_ccd3_acisf09768_pi14-548_cl_pass1_tfrozen_src16 appears to have run properly
[Fri Sep 23 15:09:05 2011] Spatial fit model total counts = 45.842400, observed total counts = 45.000000
[Fri Sep 23 15:09:05 2011] Offset between fit and detection position for source 13 = 0.353565 pixels
[Fri Sep 23 15:09:05 2011] 44.929450 total counts/ 0.001650 bgd. counts: snr = 1106.149894
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 0.353565 pixels
  Position = (1033.3, 490.9) = 6 41 10.29 9 33 25.0
  Extent = 0.7 (0.5-0.8)", rotation angle = 0
  Source counts = 44.9 +/- 6.7
  Background counts = 0.0
  Rate = 0.002 +/- 0.0002
[Fri Sep 23 15:09:05 2011] Vigneting correction estimate = 1.000000
[Fri Sep 23 15:09:05 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 23 15:09:05 2011] Assessing source extent using major axis lower bound
[Fri Sep 23 15:09:05 2011] Source does appear to be extended
[Fri Sep 23 15:09:05 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 23 15:22:07 2011] Not overwriting source region fullrun_ccd3_acisf09768_pi14-548_pass1_cl_src13_src.reg
[Fri Sep 23 15:22:07 2011] Extracting stamp from image fullrun_ccd3_acisf09768_pi14-548_cl_sm2.00.img.gz, (1003, 461) - (1051, 521)
[Fri Sep 23 15:22:07 2011] Writing fullrun_ccd3_acisf09768_pi14-548_pass1_cl_src13.gif
[Fri Sep 23 15:23:08 2011] ../../acisf09768/products/events/fullrun_ccd3_acisf09768_pi14-548_pass1_cl_src13_src.evt and ../../acisf09768/products/events/fullrun_ccd3_acisf09768_pi14-548_pass1_cl_src13_bgd.evt exist, delete to re-create
[Fri Sep 23 15:23:08 2011] Size of ../../acisf09768/products/events/fullrun_ccd3_acisf09768_pi14-548_pass1_cl_src13_src.evt.gz[events] = 44 counts
[Fri Sep 23 15:23:08 2011] Mean chipx,y = (1012.77, 545.89)
[Fri Sep 23 15:23:08 2011] Mean tdetx,y = (4586.11, 4073.77)
[Fri Sep 23 15:23:08 2011] chipx,y range = (1003.00-1023.00, 528.00-563.00)
[Fri Sep 23 15:23:08 2011] Size of ../../acisf09768/products/events/fullrun_ccd3_acisf09768_pi14-548_pass1_cl_src13_bgd.evt.gz[events] = 3 counts
[Fri Sep 23 15:23:08 2011] ../../acisf09768/products/images/fullrun_ccd3_acisf09768_pi14-548_pass1_cl_src13_src.img and ../../acisf09768/products/images/fullrun_ccd3_acisf09768_pi14-548_pass1_cl_src13_bgd.img exist, delete to re-create
[Fri Sep 23 15:23:08 2011] ../../acisf09768/products/spectra/fullrun_ccd3_acisf09768_pi14-548_pass1_cl_src13_src.pi and ../../acisf09768/products/spectra/fullrun_ccd3_acisf09768_pi14-548_pass1_cl_src13_bgd.pi exist, delete to re-create
[Fri Sep 23 15:23:08 2011] Not generating rmf since there are only 44 counts
[Fri Sep 23 15:23:12 2011] ../../acisf09768/products/lightcurves/fullrun_ccd3_acisf09768_pi14-548_pass1_cl_src13_src.lc and ../../acisf09768/products/lightcurves/fullrun_ccd3_acisf09768_pi14-548_pass1_cl_src13_bgd.lc exist, delete to re-create
[Fri Sep 23 15:25:33 2011] 109.081
[Fri Sep 23 15:25:48 2011] Updating aperture counts using extracted products
[Fri Sep 23 15:25:48 2011] Error reading totcts from fullrun_ccd3_acisf09768_pi14-548_pass1_cl_src13_src.pi.gz
[Fri Sep 23 15:25:49 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 23 15:25:49 2011] Using photon index=1.80, rate=0.00162, arf fullrun_ccd3_acisf09768_pi14-548_pass1_cl_src13.arf
[Fri Sep 23 15:25:49 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Sep 23 15:25:49 2011] Updating source flux to 3.6e-14
[Fri Sep 23 15:27:19 2011] Source 13 has fewer than 100.000000 counts, skipping spectral fitting