[Tue Nov  1 06:40:10 2011] Detection parameters:
  Position = (348.8, 668.8) = 17 0 56.14 64 16 22.6
  Extent = 1.0" x 0.5", rotation angle = 167 degrees
  Source counts = 18.9 +/- 4.5
  Background counts = 1.1
  Rate = 0.0006 +/- 0.0001

[Tue Nov  1 06:40:11 2011] Off-axis axis estimate = 4.93'
[Tue Nov  1 06:41:18 2011] Using EEF radius (= 1.15 ")to estimate initial spatial extent for simple fitting
[Tue Nov  1 06:41:18 2011] Initial guess for spatial extent in simple fitting = 1.15"
[Tue Nov  1 06:41:18 2011] source mask rpix=2.3, npix_max = 32, mask sum = 36, frac = 1.116
[Tue Nov  1 06:41:18 2011] Giving source the simple spatial ID 8 for pass 0, mean size = 1.15"
[Tue Nov  1 06:41:19 2011] fullrun_ccd3_acisf09759_pi14-548_cl_pass0_src8.ximg exists
[Tue Nov  1 06:41:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf09759_pi14-548_cl_pass0_src8.csv
[Tue Nov  1 06:41:19 2011] fullrun_ccd3_acisf09759_pi14-548_cl_pass0_src8_1.ximg exists
[Tue Nov  1 06:41:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf09759_pi14-548_cl_pass0_src8.csv
[Tue Nov  1 06:41:19 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf09759_pi14-548_cl_pass0_src8_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf09759_pi14-548_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Nov  1 06:41:19 2011] fullrun_ccd3_acisf09759_pi14-548_cl_pass0_tfrozen_src8.ximg exists
[Tue Nov  1 06:41:19 2011] fullrun_ccd3_acisf09759_pi14-548_cl_pass0_tfrozen_src8_1.ximg exists
[Tue Nov  1 06:41:19 2011] Fit fullrun_ccd3_acisf09759_pi14-548_cl_pass0_tfrozen_src8 appears to have run properly
[Tue Nov  1 06:41:36 2011] Spatial fit model total counts = 17.924300, observed total counts = 20.000000
[Tue Nov  1 06:41:36 2011] Offset between fit and detection position for source 9 = 0.814954 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.814954 pixels
  Position = (349.5, 669.1) = 17 0 56.13 64 16 22.5
  Extent = 1.6" x 0.7", rotation angle = 11
  Source counts = 18.1 +/- 4.3
  Background counts = 0.0
  Rate = 0.0006 +/- 0.0001
[Tue Nov  1 06:41:36 2011] Vigneting correction estimate = 1.000000
[Tue Nov  1 06:41:36 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Nov  1 06:41:36 2011] Assessing source extent using major
[Tue Nov  1 06:41:36 2011] Source does appear to be extended
[Tue Nov  1 06:41:36 2011] Computing asymmetry using major and minor axis, asym = 2.22
[Tue Nov  1 06:41:36 2011] Source is asymmetric
[Tue Nov  1 06:41:58 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Nov  1 06:41:58 2011] Initial guess for spatial extent in simple fitting = 1.16"
[Tue Nov  1 06:41:58 2011] source mask rpix=2.4, npix_max = 32, mask sum = 30, frac = 0.915
[Tue Nov  1 06:41:58 2011] Giving source the simple spatial ID 7 for pass 1, mean size = 1.16"
[Tue Nov  1 06:41:59 2011] fullrun_ccd3_acisf09759_pi14-548_cl_pass1_src7.ximg exists
[Tue Nov  1 06:41:59 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf09759_pi14-548_cl_pass1_src7.csv
[Tue Nov  1 06:41:59 2011] fullrun_ccd3_acisf09759_pi14-548_cl_pass1_src7_1.ximg exists
[Tue Nov  1 06:41:59 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf09759_pi14-548_cl_pass1_src7.csv
[Tue Nov  1 06:41:59 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf09759_pi14-548_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf09759_pi14-548_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Nov  1 06:41:59 2011] fullrun_ccd3_acisf09759_pi14-548_cl_pass1_tfrozen_src7.ximg exists
[Tue Nov  1 06:41:59 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf09759_pi14-548_cl_pass1_tfrozen_src7.csv
[Tue Nov  1 06:41:59 2011] fullrun_ccd3_acisf09759_pi14-548_cl_pass1_tfrozen_src7_1.ximg exists
[Tue Nov  1 06:41:59 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf09759_pi14-548_cl_pass1_tfrozen_src7.csv
[Tue Nov  1 06:41:59 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf09759_pi14-548_cl_pass1_tfrozen_src7_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf09759_pi14-548_cl_pass1_tfrozen_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Nov  1 06:42:10 2011] Spatial fit model total counts = 19.244600, observed total counts = 23.000000
[Tue Nov  1 06:42:10 2011] Offset between fit and detection position for source 9 = 1.369016 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 1.369016 pixels
  Position = (348.2, 669.5) = 17 0 56.23 64 16 22.7
  Extent = 1.0 (0.9-1.3)", rotation angle = 0
  Source counts = 20.8 +/- 4.6
  Background counts = 0.0
  Rate = 0.0007 +/- 0.0001
[Tue Nov  1 06:42:10 2011] Vigneting correction estimate = 1.000000
[Tue Nov  1 06:42:10 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Nov  1 06:42:10 2011] Assessing source extent using major axis lower bound
[Tue Nov  1 06:42:10 2011] Source does appear to be extended
[Tue Nov  1 06:42:10 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Nov  1 06:45:03 2011] Not overwriting source region fullrun_ccd3_acisf09759_pi14-548_pass1_cl_src9_src.reg
[Tue Nov  1 06:45:03 2011] Extracting stamp from image fullrun_ccd3_acisf09759_pi14-548_cl_sm2.00.img.gz, (301, 622) - (396, 717)
[Tue Nov  1 06:45:03 2011] Writing fullrun_ccd3_acisf09759_pi14-548_pass1_cl_src9.gif
[Tue Nov  1 06:45:26 2011] ../../acisf09759/products/events/fullrun_ccd3_acisf09759_pi14-548_pass1_cl_src9_src.evt and ../../acisf09759/products/events/fullrun_ccd3_acisf09759_pi14-548_pass1_cl_src9_bgd.evt exist, delete to re-create
[Tue Nov  1 06:45:26 2011] Size of ../../acisf09759/products/events/fullrun_ccd3_acisf09759_pi14-548_pass1_cl_src9_src.evt.gz[events] = 20 counts
[Tue Nov  1 06:45:26 2011] Mean chipx,y = (385.30, 805.45)
[Tue Nov  1 06:45:26 2011] Mean tdetx,y = (4326.55, 3446.30)
[Tue Nov  1 06:45:26 2011] chipx,y range = (370.00-405.00, 789.00-827.00)
[Tue Nov  1 06:45:26 2011] Size of ../../acisf09759/products/events/fullrun_ccd3_acisf09759_pi14-548_pass1_cl_src9_bgd.evt.gz[events] = 24 counts
[Tue Nov  1 06:45:26 2011] ../../acisf09759/products/images/fullrun_ccd3_acisf09759_pi14-548_pass1_cl_src9_src.img and ../../acisf09759/products/images/fullrun_ccd3_acisf09759_pi14-548_pass1_cl_src9_bgd.img exist, delete to re-create
[Tue Nov  1 06:45:26 2011] ../../acisf09759/products/spectra/fullrun_ccd3_acisf09759_pi14-548_pass1_cl_src9_src.pi and ../../acisf09759/products/spectra/fullrun_ccd3_acisf09759_pi14-548_pass1_cl_src9_bgd.pi exist, delete to re-create
[Tue Nov  1 06:45:26 2011] Not generating rmf since there are only 20 counts
[Tue Nov  1 06:45:30 2011] ../../acisf09759/products/lightcurves/fullrun_ccd3_acisf09759_pi14-548_pass1_cl_src9_src.lc and ../../acisf09759/products/lightcurves/fullrun_ccd3_acisf09759_pi14-548_pass1_cl_src9_bgd.lc exist, delete to re-create
[Tue Nov  1 06:46:41 2011] 182.246
[Tue Nov  1 06:46:52 2011] Updating aperture counts using extracted products
[Tue Nov  1 06:46:52 2011] Error reading totcts from fullrun_ccd3_acisf09759_pi14-548_pass1_cl_src9_src.pi.gz
[Tue Nov  1 06:46:53 2011] Calculating source flux in energy range 0.30-8.00
[Tue Nov  1 06:46:53 2011] Using photon index=1.80, rate=0.000668, arf fullrun_ccd3_acisf09759_pi14-548_pass1_cl_src9.arf
[Tue Nov  1 06:46:53 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Nov  1 06:46:53 2011] Updating source flux to 8.5e-15
[Tue Nov  1 06:47:02 2011] Source 9 has fewer than 100.000000 counts, skipping spectral fitting
[Tue Nov  1 06:47:03 2011] acisf09759/analysis//spectral/fullrun_ccd3_acisf09759_pi14-548_pass1_cl_src9_pl.csv not found, spectral fit skipped or did not complete