[Wed Oct 26 15:49:16 2011] Detection parameters:
  Position = (656.6, 472.6) = 14 18 51.69 52 35 59.9
  Extent = 1.8" x 1.3", rotation angle = 68 degrees
  Source counts = 46.6 +/- 7.5
  Background counts = 9.4
  Rate = 0.0008 +/- 0.0001

[Wed Oct 26 15:49:19 2011] Off-axis axis estimate = 6.09'
[Wed Oct 26 15:50:32 2011] Using EEF radius (= 1.68 ")to estimate initial spatial extent for simple fitting
[Wed Oct 26 15:50:32 2011] Initial guess for spatial extent in simple fitting = 1.68"
[Wed Oct 26 15:50:32 2011] source mask rpix=3.4, npix_max = 61, mask sum = 56, frac = 0.918
[Wed Oct 26 15:50:32 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 1.68"
[Wed Oct 26 15:50:32 2011] fullrun_ccd2_acisf09738_pi14-548_cl_pass0_src3.ximg exists
[Wed Oct 26 15:50:32 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf09738_pi14-548_cl_pass0_src3.csv
[Wed Oct 26 15:50:32 2011] fullrun_ccd2_acisf09738_pi14-548_cl_pass0_src3_1.ximg exists
[Wed Oct 26 15:50:32 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf09738_pi14-548_cl_pass0_src3.csv
[Wed Oct 26 15:50:32 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf09738_pi14-548_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf09738_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 26 15:50:33 2011] fullrun_ccd2_acisf09738_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Wed Oct 26 15:50:33 2011] fullrun_ccd2_acisf09738_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Wed Oct 26 15:50:33 2011] Fit fullrun_ccd2_acisf09738_pi14-548_cl_pass0_tfrozen_src3 appears to have run properly
[Wed Oct 26 15:50:48 2011] Spatial fit model total counts = 49.528500, observed total counts = 50.000000
[Wed Oct 26 15:50:48 2011] Offset between fit and detection position for source 1 = 0.555659 pixels
[Wed Oct 26 15:50:48 2011] 49.552900 total counts/ 13.426500 bgd. counts: snr = 9.859236
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.555659 pixels
  Position = (657.0, 473.0) = 14 18 51.70 52 35 59.8
  Extent = 1.1 (0.8-1.5)", rotation angle = 0
  Source counts = 36.1 +/- 7.0
  Background counts = 13.4
  Rate = 0.0006 +/- 0.0001
[Wed Oct 26 15:50:48 2011] Vigneting correction estimate = 1.000000
[Wed Oct 26 15:50:48 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 26 15:50:48 2011] Assessing source extent using major axis lower bound
[Wed Oct 26 15:50:48 2011] Source does appear to be extended
[Wed Oct 26 15:50:48 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct 26 15:51:19 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Oct 26 15:51:19 2011] Initial guess for spatial extent in simple fitting = 1.13"
[Wed Oct 26 15:51:19 2011] source mask rpix=2.3, npix_max = 31, mask sum = 36, frac = 1.146
[Wed Oct 26 15:51:19 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 1.13"
[Wed Oct 26 15:51:19 2011] fullrun_ccd2_acisf09738_pi14-548_cl_pass1_src3.ximg exists
[Wed Oct 26 15:51:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf09738_pi14-548_cl_pass1_src3.csv
[Wed Oct 26 15:51:19 2011] fullrun_ccd2_acisf09738_pi14-548_cl_pass1_src3_1.ximg exists
[Wed Oct 26 15:51:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf09738_pi14-548_cl_pass1_src3.csv
[Wed Oct 26 15:51:19 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf09738_pi14-548_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf09738_pi14-548_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 26 15:51:20 2011] fullrun_ccd2_acisf09738_pi14-548_cl_pass1_tfrozen_src3.ximg exists
[Wed Oct 26 15:51:20 2011] fullrun_ccd2_acisf09738_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists
[Wed Oct 26 15:51:20 2011] Fit fullrun_ccd2_acisf09738_pi14-548_cl_pass1_tfrozen_src3 appears to have run properly
[Wed Oct 26 15:51:34 2011] Spatial fit model total counts = 46.998300, observed total counts = 47.000000
[Wed Oct 26 15:51:34 2011] Offset between fit and detection position for source 1 = 0.264885 pixels
[Wed Oct 26 15:51:34 2011] 47.502900 total counts/ 14.901100 bgd. counts: snr = 8.445637
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.264885 pixels
  Position = (656.8, 472.8) = 14 18 51.71 52 35 59.8
  Extent = 1.0 (0.8-1.4)", rotation angle = 0
  Source counts = 32.6 +/- 6.9
  Background counts = 14.9
  Rate = 0.0005 +/- 0.0001
[Wed Oct 26 15:51:34 2011] Vigneting correction estimate = 1.000000
[Wed Oct 26 15:51:34 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 26 15:51:34 2011] Assessing source extent using major axis lower bound
[Wed Oct 26 15:51:34 2011] Source does appear to be extended
[Wed Oct 26 15:51:34 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct 26 15:54:03 2011] Not overwriting source region fullrun_ccd2_acisf09738_pi14-548_pass1_cl_src1_src.reg
[Wed Oct 26 15:54:03 2011] Extracting stamp from image fullrun_ccd2_acisf09738_pi14-548_cl_sm2.00.img.gz, (610, 426) - (704, 520)
[Wed Oct 26 15:54:03 2011] Writing fullrun_ccd2_acisf09738_pi14-548_pass1_cl_src1.gif
[Wed Oct 26 15:54:11 2011] ../../acisf09738/products/events/fullrun_ccd2_acisf09738_pi14-548_pass1_cl_src1_src.evt and ../../acisf09738/products/events/fullrun_ccd2_acisf09738_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Wed Oct 26 15:54:11 2011] Size of ../../acisf09738/products/events/fullrun_ccd2_acisf09738_pi14-548_pass1_cl_src1_src.evt.gz[events] = 43 counts
[Wed Oct 26 15:54:11 2011] Mean chipx,y = (343.40, 358.16)
[Wed Oct 26 15:54:11 2011] Mean tdetx,y = (3419.16, 3742.60)
[Wed Oct 26 15:54:11 2011] chipx,y range = (324.00-363.00, 338.00-379.00)
[Wed Oct 26 15:54:11 2011] Size of ../../acisf09738/products/events/fullrun_ccd2_acisf09738_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 44 counts
[Wed Oct 26 15:54:11 2011] ../../acisf09738/products/images/fullrun_ccd2_acisf09738_pi14-548_pass1_cl_src1_src.img and ../../acisf09738/products/images/fullrun_ccd2_acisf09738_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Wed Oct 26 15:54:11 2011] ../../acisf09738/products/spectra/fullrun_ccd2_acisf09738_pi14-548_pass1_cl_src1_src.pi and ../../acisf09738/products/spectra/fullrun_ccd2_acisf09738_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Wed Oct 26 15:54:11 2011] Not generating rmf since there are only 32 counts
[Wed Oct 26 15:54:14 2011] ../../acisf09738/products/lightcurves/fullrun_ccd2_acisf09738_pi14-548_pass1_cl_src1_src.lc and ../../acisf09738/products/lightcurves/fullrun_ccd2_acisf09738_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Wed Oct 26 15:55:43 2011] 177.404
[Wed Oct 26 15:57:48 2011] Updating aperture counts using extracted products
[Wed Oct 26 15:57:48 2011] Error reading totcts from fullrun_ccd2_acisf09738_pi14-548_pass1_cl_src1_src.pi.gz
[Wed Oct 26 15:57:48 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct 26 15:57:48 2011] Using photon index=1.80, rate=0.000531, arf fullrun_ccd2_acisf09738_pi14-548_pass1_cl_src1.arf
[Wed Oct 26 15:57:48 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Oct 26 15:57:48 2011] Updating source flux to 7.1e-15
[Wed Oct 26 15:58:03 2011] Source 1 has fewer than 100.000000 counts, skipping spectral fitting
[Wed Oct 26 15:58:04 2011] acisf09738/analysis//spectral/fullrun_ccd2_acisf09738_pi14-548_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete