[Fri Sep 30 17:32:34 2011] Detection parameters:
  Position = (758.5, 301.8) = 14 19 42.76 52 46 37.7
  Extent = 1.2" x 0.7", rotation angle = 105 degrees
  Source counts = 146.7 +/- 12.3
  Background counts = 5.3
  Rate = 0.003 +/- 0.0003

[Fri Sep 30 17:32:35 2011] Off-axis axis estimate = 5.00'
[Fri Sep 30 17:33:41 2011] Using EEF radius (= 1.18 ")to estimate initial spatial extent for simple fitting
[Fri Sep 30 17:33:41 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Sep 30 17:33:41 2011] Initial guess for spatial extent in simple fitting = 1.18"
[Fri Sep 30 17:33:41 2011] source mask rpix=2.4, npix_max = 33, mask sum = 30, frac = 0.892
[Fri Sep 30 17:33:41 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 1.18"
[Fri Sep 30 17:33:42 2011] fullrun_ccd3_acisf09729_pi14-548_cl_pass0_src1.ximg exists
[Fri Sep 30 17:33:42 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf09729_pi14-548_cl_pass0_src1.csv
[Fri Sep 30 17:33:42 2011] fullrun_ccd3_acisf09729_pi14-548_cl_pass0_src1_1.ximg exists
[Fri Sep 30 17:33:42 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf09729_pi14-548_cl_pass0_src1.csv
[Fri Sep 30 17:33:42 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf09729_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf09729_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 17:33:43 2011] fullrun_ccd3_acisf09729_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Fri Sep 30 17:33:43 2011] fullrun_ccd3_acisf09729_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Sep 30 17:33:43 2011] Fit fullrun_ccd3_acisf09729_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Sep 30 17:33:55 2011] Spatial fit model total counts = 155.732000, observed total counts = 156.000000
[Fri Sep 30 17:33:55 2011] Offset between fit and detection position for source 25 = 0.770917 pixels
[Fri Sep 30 17:33:55 2011] 157.029700 total counts/ 21.250700 bgd. counts: snr = 29.454116
Spatial fit parameters:
  Offset between fit and detection position for source 25 = 0.770917 pixels
  Position = (759.1, 302.3) = 14 19 42.75 52 46 37.7
  Extent = 1.1 (0.9-1.3)", rotation angle = 0
  Source counts = 135.8 +/- 12.5
  Background counts = 21.3
  Rate = 0.003 +/- 0.0003
[Fri Sep 30 17:33:55 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 17:33:55 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 17:33:55 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 17:33:55 2011] Source does appear to be extended
[Fri Sep 30 17:33:55 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 17:34:25 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Sep 30 17:34:25 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Sep 30 17:34:25 2011] Initial guess for spatial extent in simple fitting = 1.12"
[Fri Sep 30 17:34:25 2011] source mask rpix=2.3, npix_max = 30, mask sum = 36, frac = 1.163
[Fri Sep 30 17:34:25 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 1.12"
[Fri Sep 30 17:34:26 2011] fullrun_ccd3_acisf09729_pi14-548_cl_pass1_src1.ximg exists
[Fri Sep 30 17:34:26 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf09729_pi14-548_cl_pass1_src1.csv
[Fri Sep 30 17:34:26 2011] fullrun_ccd3_acisf09729_pi14-548_cl_pass1_src1_1.ximg exists
[Fri Sep 30 17:34:26 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf09729_pi14-548_cl_pass1_src1.csv
[Fri Sep 30 17:34:26 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf09729_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf09729_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 17:34:28 2011] fullrun_ccd3_acisf09729_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Fri Sep 30 17:34:28 2011] fullrun_ccd3_acisf09729_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Sep 30 17:34:28 2011] Fit fullrun_ccd3_acisf09729_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Sep 30 17:34:41 2011] Spatial fit model total counts = 155.998000, observed total counts = 156.000000
[Fri Sep 30 17:34:41 2011] Offset between fit and detection position for source 25 = 0.011297 pixels
[Fri Sep 30 17:34:41 2011] 157.296400 total counts/ 25.947400 bgd. counts: snr = 25.785755
Spatial fit parameters:
  Offset between fit and detection position for source 25 = 0.011297 pixels
  Position = (759.1, 302.2) = 14 19 42.75 52 46 37.7
  Extent = 1.1 (0.9-1.3)", rotation angle = 0
  Source counts = 131.3 +/- 12.5
  Background counts = 25.9
  Rate = 0.003 +/- 0.0003
[Fri Sep 30 17:34:41 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 17:34:41 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 17:34:41 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 17:34:41 2011] Source does appear to be extended
[Fri Sep 30 17:34:41 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 17:38:54 2011] Not overwriting source region fullrun_ccd3_acisf09729_pi14-548_pass1_cl_src25_src.reg
[Fri Sep 30 17:38:54 2011] Extracting stamp from image fullrun_ccd3_acisf09729_pi14-548_cl_sm2.00.img.gz, (710, 253) - (808, 351)
[Fri Sep 30 17:38:54 2011] Writing fullrun_ccd3_acisf09729_pi14-548_pass1_cl_src25.gif
[Fri Sep 30 17:38:57 2011] ../../acisf09729/products/events/fullrun_ccd3_acisf09729_pi14-548_pass1_cl_src25_src.evt and ../../acisf09729/products/events/fullrun_ccd3_acisf09729_pi14-548_pass1_cl_src25_bgd.evt exist, delete to re-create
[Fri Sep 30 17:38:57 2011] Size of ../../acisf09729/products/events/fullrun_ccd3_acisf09729_pi14-548_pass1_cl_src25_src.evt.gz[events] = 152 counts
[Fri Sep 30 17:38:57 2011] Mean chipx,y = (353.26, 890.66)
[Fri Sep 30 17:38:57 2011] Mean tdetx,y = (4241.34, 3414.26)
[Fri Sep 30 17:38:57 2011] chipx,y range = (334.00-374.00, 868.00-912.00)
[Fri Sep 30 17:38:57 2011] Size of ../../acisf09729/products/events/fullrun_ccd3_acisf09729_pi14-548_pass1_cl_src25_bgd.evt.gz[events] = 42 counts
[Fri Sep 30 17:38:57 2011] ../../acisf09729/products/images/fullrun_ccd3_acisf09729_pi14-548_pass1_cl_src25_src.img and ../../acisf09729/products/images/fullrun_ccd3_acisf09729_pi14-548_pass1_cl_src25_bgd.img exist, delete to re-create
[Fri Sep 30 17:38:57 2011] ../../acisf09729/products/spectra/fullrun_ccd3_acisf09729_pi14-548_pass1_cl_src25_src.pi and ../../acisf09729/products/spectra/fullrun_ccd3_acisf09729_pi14-548_pass1_cl_src25_bgd.pi exist, delete to re-create
[Fri Sep 30 17:39:01 2011] ../../acisf09729/products/lightcurves/fullrun_ccd3_acisf09729_pi14-548_pass1_cl_src25_src.lc and ../../acisf09729/products/lightcurves/fullrun_ccd3_acisf09729_pi14-548_pass1_cl_src25_bgd.lc exist, delete to re-create
[Fri Sep 30 17:41:19 2011] Keeping rmf generated by specextract
[Fri Sep 30 17:41:19 2011] 180.697
[Fri Sep 30 17:41:36 2011] Updating aperture counts using extracted products
[Fri Sep 30 17:41:36 2011] Error reading totcts from fullrun_ccd3_acisf09729_pi14-548_pass1_cl_src25_src.pi.gz
[Fri Sep 30 17:41:36 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 30 17:41:36 2011] Using photon index=1.80, rate=0.00273, arf fullrun_ccd3_acisf09729_pi14-548_pass1_cl_src25.arf
[Fri Sep 30 17:41:36 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Sep 30 17:41:36 2011] Updating source flux to 3.6e-14
[Fri Sep 30 17:42:00 2011] Reading fit data from acisf09729/analysis//spectral/fullrun_ccd3_acisf09729_pi14-548_pass1_cl_src25_pl.csv
[Fri Sep 30 17:42:00 2011] Spectral fit parameter nH value = 2.90111e+20
[Fri Sep 30 17:42:00 2011] Spectral fit parameter PhoIndex value = 1.71131
[Fri Sep 30 17:42:00 2011] Failed to get F(0.3-8.0) from acisf09729/analysis//spectral/fullrun_ccd3_acisf09729_pi14-548_pass1_cl_src25_pl.csv, possibly due to different flux energy range selected
[Fri Sep 30 17:42:00 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 30 17:42:00 2011] Using Nh = 2.9e+20, photon index=1.71, rate=0.00273, arf fullrun_ccd3_acisf09729_pi14-548_pass1_cl_src25.arf
[Fri Sep 30 17:42:00 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Sep 30 17:42:00 2011] Updating source flux to 3.6e-14