[Thu Sep 22 21:17:46 2011] Detection parameters:
  Position = (695.0, 306.2) = 14 20 52.45 52 56 22.4
  Extent = 1.8" x 1.0", rotation angle = 121 degrees
  Source counts = 281.5 +/- 17.1
  Background counts = 9.5
  Rate = 0.02 +/- 0.001

[Thu Sep 22 21:17:46 2011] Off-axis axis estimate = 6.74'
[Thu Sep 22 21:18:37 2011] Using EEF radius (= 2.03 ")to estimate initial spatial extent for simple fitting
[Thu Sep 22 21:18:37 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Sep 22 21:18:37 2011] Initial guess for spatial extent in simple fitting = 2.03"
[Thu Sep 22 21:18:37 2011] source mask rpix=4.1, npix_max = 85, mask sum = 86, frac = 1.008
[Thu Sep 22 21:18:37 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 2.03"
[Thu Sep 22 21:18:38 2011] fullrun_ccd3_acisf09721_pi14-548_cl_pass0_src1.ximg exists
[Thu Sep 22 21:18:39 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf09721_pi14-548_cl_pass0_src1.csv
[Thu Sep 22 21:18:39 2011] fullrun_ccd3_acisf09721_pi14-548_cl_pass0_src1_1.ximg exists
[Thu Sep 22 21:18:39 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf09721_pi14-548_cl_pass0_src1.csv
[Thu Sep 22 21:18:39 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf09721_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf09721_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 22 21:18:44 2011] fullrun_ccd3_acisf09721_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Thu Sep 22 21:18:44 2011] fullrun_ccd3_acisf09721_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Sep 22 21:18:44 2011] Fit fullrun_ccd3_acisf09721_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Sep 22 21:18:51 2011] Spatial fit model total counts = 318.097000, observed total counts = 305.000000
[Thu Sep 22 21:18:51 2011] Offset between fit and detection position for source 14 = 0.918060 pixels
[Thu Sep 22 21:18:51 2011] 319.034100 total counts/ 27.874100 bgd. counts: snr = 55.148193
Spatial fit parameters:
  Offset between fit and detection position for source 14 = 0.918060 pixels
  Position = (695.3, 307.1) = 14 20 52.46 52 56 22.6
  Extent = 1.6 (1.5-1.8)", rotation angle = 0
  Source counts = 291.2 +/- 17.9
  Background counts = 27.9
  Rate = 0.02 +/- 0.001
[Thu Sep 22 21:18:51 2011] Vigneting correction estimate = 1.000000
[Thu Sep 22 21:18:51 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 22 21:18:51 2011] Assessing source extent using major axis lower bound
[Thu Sep 22 21:18:51 2011] Source does appear to be extended
[Thu Sep 22 21:18:51 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep 22 21:19:18 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Sep 22 21:19:18 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Sep 22 21:19:18 2011] Initial guess for spatial extent in simple fitting = 1.64"
[Thu Sep 22 21:19:18 2011] source mask rpix=3.3, npix_max = 59, mask sum = 61, frac = 1.033
[Thu Sep 22 21:19:18 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 1.64"
[Thu Sep 22 21:19:19 2011] fullrun_ccd3_acisf09721_pi14-548_cl_pass1_src1.ximg exists
[Thu Sep 22 21:19:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf09721_pi14-548_cl_pass1_src1.csv
[Thu Sep 22 21:19:19 2011] fullrun_ccd3_acisf09721_pi14-548_cl_pass1_src1_1.ximg exists
[Thu Sep 22 21:19:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf09721_pi14-548_cl_pass1_src1.csv
[Thu Sep 22 21:19:19 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf09721_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf09721_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 22 21:19:21 2011] fullrun_ccd3_acisf09721_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Thu Sep 22 21:19:21 2011] fullrun_ccd3_acisf09721_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Sep 22 21:19:21 2011] Fit fullrun_ccd3_acisf09721_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Sep 22 21:19:30 2011] Spatial fit model total counts = 313.476000, observed total counts = 302.000000
[Thu Sep 22 21:19:30 2011] Offset between fit and detection position for source 14 = 0.200913 pixels
[Thu Sep 22 21:19:30 2011] 315.491500 total counts/ 58.519500 bgd. counts: snr = 33.591972
Spatial fit parameters:
  Offset between fit and detection position for source 14 = 0.200913 pixels
  Position = (695.2, 306.9) = 14 20 52.46 52 56 22.5
  Extent = 1.4 (1.2-1.7)", rotation angle = 0
  Source counts = 257.0 +/- 17.8
  Background counts = 58.5
  Rate = 0.02 +/- 0.001
[Thu Sep 22 21:19:30 2011] Vigneting correction estimate = 1.000000
[Thu Sep 22 21:19:30 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 22 21:19:30 2011] Assessing source extent using major axis lower bound
[Thu Sep 22 21:19:30 2011] Source does appear to be extended
[Thu Sep 22 21:19:30 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep 22 21:22:18 2011] Not overwriting source region fullrun_ccd3_acisf09721_pi14-548_pass1_cl_src14_src.reg
[Thu Sep 22 21:22:18 2011] Extracting stamp from image fullrun_ccd3_acisf09721_pi14-548_cl_sm2.00.img.gz, (630, 242) - (760, 372)
[Thu Sep 22 21:22:18 2011] Writing fullrun_ccd3_acisf09721_pi14-548_pass1_cl_src14.gif
[Thu Sep 22 21:22:19 2011] ../../acisf09721/products/events/fullrun_ccd3_acisf09721_pi14-548_pass1_cl_src14_src.evt and ../../acisf09721/products/events/fullrun_ccd3_acisf09721_pi14-548_pass1_cl_src14_bgd.evt exist, delete to re-create
[Thu Sep 22 21:22:20 2011] Size of ../../acisf09721/products/events/fullrun_ccd3_acisf09721_pi14-548_pass1_cl_src14_src.evt.gz[events] = 292 counts
[Thu Sep 22 21:22:20 2011] Mean chipx,y = (177.02, 743.20)
[Thu Sep 22 21:22:20 2011] Mean tdetx,y = (4388.80, 3238.02)
[Thu Sep 22 21:22:20 2011] chipx,y range = (154.00-199.00, 718.00-770.00)
[Thu Sep 22 21:22:20 2011] Size of ../../acisf09721/products/events/fullrun_ccd3_acisf09721_pi14-548_pass1_cl_src14_bgd.evt.gz[events] = 28 counts
[Thu Sep 22 21:22:20 2011] ../../acisf09721/products/images/fullrun_ccd3_acisf09721_pi14-548_pass1_cl_src14_src.img and ../../acisf09721/products/images/fullrun_ccd3_acisf09721_pi14-548_pass1_cl_src14_bgd.img exist, delete to re-create
[Thu Sep 22 21:22:20 2011] ../../acisf09721/products/spectra/fullrun_ccd3_acisf09721_pi14-548_pass1_cl_src14_src.pi and ../../acisf09721/products/spectra/fullrun_ccd3_acisf09721_pi14-548_pass1_cl_src14_bgd.pi exist, delete to re-create
[Thu Sep 22 21:22:23 2011] ../../acisf09721/products/lightcurves/fullrun_ccd3_acisf09721_pi14-548_pass1_cl_src14_src.lc and ../../acisf09721/products/lightcurves/fullrun_ccd3_acisf09721_pi14-548_pass1_cl_src14_bgd.lc exist, delete to re-create
[Thu Sep 22 21:23:18 2011] Keeping rmf generated by specextract
[Thu Sep 22 21:23:19 2011] 168.311
[Thu Sep 22 21:23:27 2011] Updating aperture counts using extracted products
[Thu Sep 22 21:23:27 2011] Error reading totcts from fullrun_ccd3_acisf09721_pi14-548_pass1_cl_src14_src.pi.gz
[Thu Sep 22 21:23:27 2011] Calculating source flux in energy range 0.30-8.00
[Thu Sep 22 21:23:27 2011] Using photon index=1.80, rate=0.0155, arf fullrun_ccd3_acisf09721_pi14-548_pass1_cl_src14.arf
[Thu Sep 22 21:23:27 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Sep 22 21:23:27 2011] Updating source flux to 2.2e-13
[Thu Sep 22 21:23:48 2011] Reading fit data from acisf09721/analysis//spectral/fullrun_ccd3_acisf09721_pi14-548_pass1_cl_src14_pl.csv
[Thu Sep 22 21:23:48 2011] Spectral fit parameter nH value = 1.15394e+20
[Thu Sep 22 21:23:48 2011] Spectral fit parameter PhoIndex value = 2.31486
[Thu Sep 22 21:23:48 2011] Failed to get F(0.3-8.0) from acisf09721/analysis//spectral/fullrun_ccd3_acisf09721_pi14-548_pass1_cl_src14_pl.csv, possibly due to different flux energy range selected
[Thu Sep 22 21:23:48 2011] Calculating source flux in energy range 0.30-8.00
[Thu Sep 22 21:23:48 2011] Using Nh = 1.2e+20, photon index=2.31, rate=0.0155, arf fullrun_ccd3_acisf09721_pi14-548_pass1_cl_src14.arf
[Thu Sep 22 21:23:48 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Sep 22 21:23:48 2011] Updating source flux to 2.2e-13