[Mon Oct  3 06:51:31 2011] Detection parameters:
  Position = (84.2, 979.6) = 18 20 29.87 -16 10 44.8
  Extent = 0.7" x 0.5", rotation angle = 137 degrees
  Source counts = 7598.0 +/- 88.4
  Background counts = 220.0
  Rate = 0.2 +/- 0.002

[Mon Oct  3 06:52:12 2011] Off-axis axis estimate = 0.28'
[Mon Oct  3 06:55:38 2011] Using EEF radius (= 0.41 ")to estimate initial spatial extent for simple fitting
[Mon Oct  3 06:55:38 2011] Initial guess for spatial extent in simple fitting = 0.41"
[Mon Oct  3 06:55:38 2011] source mask rpix=0.8, npix_max = 7, mask sum = 6, frac = 0.853
[Mon Oct  3 06:55:38 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 0.41"
[Mon Oct  3 06:55:39 2011] fullrun_ccd3_acisf00972_pi14-548_cl_pass0_src1.ximg exists
[Mon Oct  3 06:55:39 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf00972_pi14-548_cl_pass0_src1.csv
[Mon Oct  3 06:55:39 2011] fullrun_ccd3_acisf00972_pi14-548_cl_pass0_src1_1.ximg exists
[Mon Oct  3 06:55:39 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf00972_pi14-548_cl_pass0_src1.csv
[Mon Oct  3 06:55:39 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf00972_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf00972_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct  3 06:55:47 2011] fullrun_ccd3_acisf00972_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Mon Oct  3 06:55:48 2011] fullrun_ccd3_acisf00972_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Oct  3 06:55:48 2011] Fit fullrun_ccd3_acisf00972_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Mon Oct  3 06:56:53 2011] Spatial fit model total counts = 7826.990000, observed total counts = 7827.000000
[Mon Oct  3 06:56:53 2011] Offset between fit and detection position for source 1 = 0.679308 pixels
[Mon Oct  3 06:56:53 2011] 7860.069000 total counts/ 751.489000 bgd. counts: snr = 259.311359
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.679308 pixels
  Position = (84.6, 980.1) = 18 20 29.87 -16 10 44.8
  Extent = 0.8 (0.7-0.8)", rotation angle = 0
  Source counts = 7108.6 +/- 88.7
  Background counts = 751.5
  Rate = 0.2 +/- 0.002
[Mon Oct  3 06:56:53 2011] Vigneting correction estimate = 1.000000
[Mon Oct  3 06:56:53 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct  3 06:56:53 2011] Assessing source extent using major axis lower bound
[Mon Oct  3 06:56:53 2011] Source does appear to be extended
[Mon Oct  3 06:56:53 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct  3 06:58:10 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Oct  3 06:58:10 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Oct  3 06:58:10 2011] Initial guess for spatial extent in simple fitting = 0.76"
[Mon Oct  3 06:58:10 2011] source mask rpix=1.6, npix_max = 16, mask sum = 16, frac = 0.951
[Mon Oct  3 06:58:10 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 0.76"
[Mon Oct  3 06:58:11 2011] fullrun_ccd3_acisf00972_pi14-548_cl_pass1_src1.ximg exists
[Mon Oct  3 06:58:11 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf00972_pi14-548_cl_pass1_src1.csv
[Mon Oct  3 06:58:11 2011] fullrun_ccd3_acisf00972_pi14-548_cl_pass1_src1_1.ximg exists
[Mon Oct  3 06:58:11 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf00972_pi14-548_cl_pass1_src1.csv
[Mon Oct  3 06:58:11 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf00972_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf00972_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct  3 06:58:15 2011] fullrun_ccd3_acisf00972_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Mon Oct  3 06:58:15 2011] fullrun_ccd3_acisf00972_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Oct  3 06:58:15 2011] Fit fullrun_ccd3_acisf00972_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Mon Oct  3 06:59:32 2011] Spatial fit model total counts = 7242.560000, observed total counts = 7889.000000
[Mon Oct  3 06:59:32 2011] Offset between fit and detection position for source 1 = 0.075422 pixels
[Mon Oct  3 06:59:32 2011] 7411.542800 total counts/ 22.882800 bgd. counts: snr = 1544.582464
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.075422 pixels
  Position = (84.5, 980.1) = 18 20 29.88 -16 10 44.8
  Extent = 0.8 (0.8-0.8)", rotation angle = 0
  Source counts = 7388.7 +/- 86.1
  Background counts = 22.9
  Rate = 0.2 +/- 0.002
[Mon Oct  3 06:59:33 2011] Vigneting correction estimate = 1.000000
[Mon Oct  3 06:59:33 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct  3 06:59:33 2011] Assessing source extent using major axis lower bound
[Mon Oct  3 06:59:33 2011] Source does appear to be extended
[Mon Oct  3 06:59:33 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct  3 07:21:37 2011] Not overwriting source region fullrun_ccd3_acisf00972_pi14-548_pass1_cl_src1_src.reg
[Mon Oct  3 07:21:37 2011] Extracting stamp from image fullrun_ccd3_acisf00972_pi14-548_cl_sm2.00.img.gz, (49, 945) - (120, 1015)
[Mon Oct  3 07:21:37 2011] Writing fullrun_ccd3_acisf00972_pi14-548_pass1_cl_src1.gif
[Mon Oct  3 07:22:07 2011] ../../acisf00972/products/events/fullrun_ccd3_acisf00972_pi14-548_pass1_cl_src1_src.evt and ../../acisf00972/products/events/fullrun_ccd3_acisf00972_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Mon Oct  3 07:22:07 2011] Size of ../../acisf00972/products/events/fullrun_ccd3_acisf00972_pi14-548_pass1_cl_src1_src.evt.gz[events] = 7509 counts
[Mon Oct  3 07:22:07 2011] Mean chipx,y = (954.43, 969.54)
[Mon Oct  3 07:22:07 2011] Mean tdetx,y = (4162.46, 4015.43)
[Mon Oct  3 07:22:07 2011] chipx,y range = (933.00-976.00, 948.00-992.00)
[Mon Oct  3 07:22:07 2011] Size of ../../acisf00972/products/events/fullrun_ccd3_acisf00972_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 474 counts
[Mon Oct  3 07:22:07 2011] ../../acisf00972/products/images/fullrun_ccd3_acisf00972_pi14-548_pass1_cl_src1_src.img and ../../acisf00972/products/images/fullrun_ccd3_acisf00972_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Mon Oct  3 07:22:07 2011] ../../acisf00972/products/spectra/fullrun_ccd3_acisf00972_pi14-548_pass1_cl_src1_src.pi and ../../acisf00972/products/spectra/fullrun_ccd3_acisf00972_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Mon Oct  3 07:22:13 2011] ../../acisf00972/products/lightcurves/fullrun_ccd3_acisf00972_pi14-548_pass1_cl_src1_src.lc and ../../acisf00972/products/lightcurves/fullrun_ccd3_acisf00972_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Mon Oct  3 07:33:08 2011] Keeping rmf generated by specextract
[Mon Oct  3 07:33:08 2011] 205.038
[Mon Oct  3 07:34:09 2011] Updating aperture counts using extracted products
[Mon Oct  3 07:34:09 2011] Error reading totcts from fullrun_ccd3_acisf00972_pi14-548_pass1_cl_src1_src.pi.gz
[Mon Oct  3 07:34:12 2011] Calculating source flux in energy range 0.30-8.00
[Mon Oct  3 07:34:12 2011] Using photon index=1.80, rate=0.187, arf fullrun_ccd3_acisf00972_pi14-548_pass1_cl_src1.arf
[Mon Oct  3 07:34:12 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Oct  3 07:34:12 2011] Updating source flux to 2.8e-12
[Mon Oct  3 07:37:38 2011] Reading fit data from acisf00972/analysis//spectral/fullrun_ccd3_acisf00972_pi14-548_pass1_cl_src1_pl.csv
[Mon Oct  3 07:37:38 2011] Spectral fit parameter nH value = 1.32373e+22
[Mon Oct  3 07:37:38 2011] Spectral fit parameter PhoIndex value = 2.13018
[Mon Oct  3 07:37:38 2011] Failed to get F(0.3-8.0) from acisf00972/analysis//spectral/fullrun_ccd3_acisf00972_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Mon Oct  3 07:37:38 2011] Calculating source flux in energy range 0.30-8.00
[Mon Oct  3 07:37:38 2011] Using Nh = 1.3e+22, photon index=2.13, rate=0.187, arf fullrun_ccd3_acisf00972_pi14-548_pass1_cl_src1.arf
[Mon Oct  3 07:37:38 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Oct  3 07:37:38 2011] Updating source flux to 2.6e-12