[Wed Oct  5 04:49:30 2011] Detection parameters:
  Position = (817.5, 506.9) = 12 37 6.87 62 17 2.0
  Extent = 0.7" x 0.6", rotation angle = 152 degrees
  Source counts = 242.5 +/- 15.7
  Background counts = 4.5
  Rate = 0.004 +/- 0.0003

[Wed Oct  5 04:49:35 2011] Off-axis axis estimate = 4.14'
[Wed Oct  5 04:52:29 2011] Using EEF radius (= 0.87 ")to estimate initial spatial extent for simple fitting
[Wed Oct  5 04:52:29 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Oct  5 04:52:29 2011] Initial guess for spatial extent in simple fitting = 0.87"
[Wed Oct  5 04:52:29 2011] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.968
[Wed Oct  5 04:52:29 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 0.87"
[Wed Oct  5 04:52:30 2011] fullrun_ccd2_acisf00966_pi14-548_cl_pass0_src1.ximg exists
[Wed Oct  5 04:52:30 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf00966_pi14-548_cl_pass0_src1.csv
[Wed Oct  5 04:52:30 2011] fullrun_ccd2_acisf00966_pi14-548_cl_pass0_src1_1.ximg exists
[Wed Oct  5 04:52:30 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf00966_pi14-548_cl_pass0_src1.csv
[Wed Oct  5 04:52:30 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf00966_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf00966_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct  5 04:52:31 2011] fullrun_ccd2_acisf00966_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Wed Oct  5 04:52:31 2011] fullrun_ccd2_acisf00966_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Oct  5 04:52:31 2011] Fit fullrun_ccd2_acisf00966_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Oct  5 04:52:59 2011] Spatial fit model total counts = 245.791000, observed total counts = 246.000000
[Wed Oct  5 04:52:59 2011] Offset between fit and detection position for source 1 = 0.708999 pixels
[Wed Oct  5 04:52:59 2011] 246.759300 total counts/ 14.797300 bgd. counts: snr = 60.301151
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.708999 pixels
  Position = (817.9, 507.5) = 12 37 6.88 62 17 2.0
  Extent = 0.8 (0.7-0.9)", rotation angle = 0
  Source counts = 232.0 +/- 15.7
  Background counts = 14.8
  Rate = 0.004 +/- 0.0003
[Wed Oct  5 04:52:59 2011] Vigneting correction estimate = 1.000000
[Wed Oct  5 04:52:59 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct  5 04:52:59 2011] Assessing source extent using major axis lower bound
[Wed Oct  5 04:52:59 2011] Source does appear to be extended
[Wed Oct  5 04:52:59 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct  5 04:53:49 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Oct  5 04:53:49 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Oct  5 04:53:49 2011] Initial guess for spatial extent in simple fitting = 0.83"
[Wed Oct  5 04:53:49 2011] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.036
[Wed Oct  5 04:53:49 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 0.83"
[Wed Oct  5 04:53:50 2011] fullrun_ccd2_acisf00966_pi14-548_cl_pass1_src1.ximg exists
[Wed Oct  5 04:53:50 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd2_acisf00966_pi14-548_cl_pass1_src1.csv
[Wed Oct  5 04:53:50 2011] fullrun_ccd2_acisf00966_pi14-548_cl_pass1_src1_1.ximg exists
[Wed Oct  5 04:53:50 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd2_acisf00966_pi14-548_cl_pass1_src1.csv
[Wed Oct  5 04:53:50 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf00966_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf00966_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct  5 04:53:50 2011] fullrun_ccd2_acisf00966_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Wed Oct  5 04:53:50 2011] fullrun_ccd2_acisf00966_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Oct  5 04:53:50 2011] Fit fullrun_ccd2_acisf00966_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Oct  5 04:54:15 2011] Spatial fit model total counts = 247.605000, observed total counts = 247.000000
[Wed Oct  5 04:54:15 2011] Offset between fit and detection position for source 1 = 0.010757 pixels
[Wed Oct  5 04:54:15 2011] 248.284400 total counts/ 14.679400 bgd. counts: snr = 60.971655
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.010757 pixels
  Position = (817.9, 507.5) = 12 37 6.88 62 17 2.0
  Extent = 0.8 (0.8-0.9)", rotation angle = 0
  Source counts = 233.6 +/- 15.8
  Background counts = 14.7
  Rate = 0.004 +/- 0.0003
[Wed Oct  5 04:54:15 2011] Vigneting correction estimate = 1.000000
[Wed Oct  5 04:54:15 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct  5 04:54:15 2011] Assessing source extent using major axis lower bound
[Wed Oct  5 04:54:15 2011] Source does appear to be extended
[Wed Oct  5 04:54:15 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct  5 06:03:08 2011] Not overwriting source region fullrun_ccd2_acisf00966_pi14-548_pass1_cl_src1_src.reg
[Wed Oct  5 06:03:08 2011] Extracting stamp from image fullrun_ccd2_acisf00966_pi14-548_cl_sm2.00.img.gz, (780, 469) - (856, 546)
[Wed Oct  5 06:03:08 2011] Writing fullrun_ccd2_acisf00966_pi14-548_pass1_cl_src1.gif
[Wed Oct  5 06:03:11 2011] ../../acisf00966/products/events/fullrun_ccd2_acisf00966_pi14-548_pass1_cl_src1_src.evt and ../../acisf00966/products/events/fullrun_ccd2_acisf00966_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Wed Oct  5 06:03:11 2011] Size of ../../acisf00966/products/events/fullrun_ccd2_acisf00966_pi14-548_pass1_cl_src1_src.evt.gz[events] = 244 counts
[Wed Oct  5 06:03:11 2011] Mean chipx,y = (415.90, 728.42)
[Wed Oct  5 06:03:11 2011] Mean tdetx,y = (3789.42, 3670.10)
[Wed Oct  5 06:03:11 2011] chipx,y range = (396.00-435.00, 707.00-747.00)
[Wed Oct  5 06:03:11 2011] Size of ../../acisf00966/products/events/fullrun_ccd2_acisf00966_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 33 counts
[Wed Oct  5 06:03:11 2011] ../../acisf00966/products/images/fullrun_ccd2_acisf00966_pi14-548_pass1_cl_src1_src.img and ../../acisf00966/products/images/fullrun_ccd2_acisf00966_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Wed Oct  5 06:03:11 2011] rmf not found, will run specextract
[Wed Oct  5 06:03:27 2011] ../../acisf00966/products/spectra/fullrun_ccd2_acisf00966_pi14-548_pass1_cl_src1_bkg.pi not found
[Wed Oct  5 06:03:27 2011] ../../acisf00966/products/spectra/fullrun_ccd2_acisf00966_pi14-548_pass1_cl_src1.warf not found
[Wed Oct  5 06:03:27 2011] ../../acisf00966/products/spectra/fullrun_ccd2_acisf00966_pi14-548_pass1_cl_src1.wrmf not found
[Wed Oct  5 06:03:27 2011] Removal of ../../acisf00966/products/spectra/fullrun_ccd2_acisf00966_pi14-548_pass1_cl_src1.soff failed
[Wed Oct  5 06:03:27 2011] Failed to rename ../../acisf00966/products/spectra/fullrun_ccd2_acisf00966_pi14-548_pass1_cl_src1_grp.pi to ../../acisf00966/products/spectra/fullrun_ccd2_acisf00966_pi14-548_pass1_cl_src1_src.pi
[Wed Oct  5 06:04:53 2011] ../../acisf00966/products/lightcurves/fullrun_ccd2_acisf00966_pi14-548_pass1_cl_src1_src.lc and ../../acisf00966/products/lightcurves/fullrun_ccd2_acisf00966_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Wed Oct  5 06:32:56 2011] 183.794
[Wed Oct  5 07:01:01 2011] Updating aperture counts using extracted products
[Wed Oct  5 07:01:01 2011] Error reading totcts from fullrun_ccd2_acisf00966_pi14-548_pass1_cl_src1_src.pi
[Wed Oct  5 07:01:02 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct  5 07:01:02 2011] Using photon index=1.80, rate=0.00407, arf fullrun_ccd2_acisf00966_pi14-548_pass1_cl_src1.arf
[Wed Oct  5 07:01:02 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Oct  5 07:01:02 2011] Updating source flux to 4.2e-14
[Wed Oct  5 07:01:11 2011] Source 1 has no response, skipping
[Wed Oct  5 07:01:12 2011] acisf00966/analysis//spectral/fullrun_ccd2_acisf00966_pi14-548_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete