[Wed Sep 28 03:58:09 2011] Detection parameters:
  Position = (925.8, 227.6) = 17 40 5.76 69 1 2.5
  Extent = 0.7" x 0.5", rotation angle = 104 degrees
  Source counts = 14.1 +/- 3.9
  Background counts = 0.9
  Rate = 0.0005 +/- 0.0001

[Wed Sep 28 03:58:10 2011] Off-axis axis estimate = 1.72'
[Wed Sep 28 03:59:05 2011] Using EEF radius (= 0.41 ")to estimate initial spatial extent for simple fitting
[Wed Sep 28 03:59:05 2011] Initial guess for spatial extent in simple fitting = 0.41"
[Wed Sep 28 03:59:05 2011] source mask rpix=0.8, npix_max = 7, mask sum = 9, frac = 1.281
[Wed Sep 28 03:59:05 2011] Giving source the simple spatial ID 10 for pass 0, mean size = 0.41"
[Wed Sep 28 03:59:06 2011] fullrun_ccd3_acisf09595_pi14-548_cl_pass0_src10.ximg exists
[Wed Sep 28 03:59:06 2011] fullrun_ccd3_acisf09595_pi14-548_cl_pass0_src10_1.ximg exists
[Wed Sep 28 03:59:06 2011] Fit fullrun_ccd3_acisf09595_pi14-548_cl_pass0_src10 appears to have run properly
[Wed Sep 28 03:59:06 2011] fullrun_ccd3_acisf09595_pi14-548_cl_pass0_tfrozen_src10.ximg exists
[Wed Sep 28 03:59:06 2011] fullrun_ccd3_acisf09595_pi14-548_cl_pass0_tfrozen_src10_1.ximg exists
[Wed Sep 28 03:59:06 2011] Fit fullrun_ccd3_acisf09595_pi14-548_cl_pass0_tfrozen_src10 appears to have run properly
[Wed Sep 28 03:59:16 2011] Spatial fit model total counts = 15.050700, observed total counts = 16.000000
[Wed Sep 28 03:59:16 2011] Offset between fit and detection position for source 10 = 0.628331 pixels
[Wed Sep 28 03:59:16 2011] 15.839610 total counts/ 2.440110 bgd. counts: snr = 8.577958
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.628331 pixels
  Position = (926.4, 227.4) = 17 40 5.75 69 1 2.2
  Extent = 0.5 (0.4-0.6)", rotation angle = 0
  Source counts = 13.4 +/- 4.0
  Background counts = 2.4
  Rate = 0.0005 +/- 0.0001
[Wed Sep 28 03:59:16 2011] Vigneting correction estimate = 1.000000
[Wed Sep 28 03:59:16 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 28 03:59:16 2011] Assessing source extent using major axis lower bound
[Wed Sep 28 03:59:16 2011] Source does appear to be extended
[Wed Sep 28 03:59:16 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 28 03:59:38 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Sep 28 03:59:38 2011] Initial guess for spatial extent in simple fitting = 0.50"
[Wed Sep 28 03:59:38 2011] source mask rpix=1.0, npix_max = 9, mask sum = 9, frac = 0.981
[Wed Sep 28 03:59:38 2011] Giving source the simple spatial ID 10 for pass 1, mean size = 0.50"
[Wed Sep 28 03:59:38 2011] fullrun_ccd3_acisf09595_pi14-548_cl_pass1_src10.ximg exists
[Wed Sep 28 03:59:39 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf09595_pi14-548_cl_pass1_src10.csv
[Wed Sep 28 03:59:39 2011] fullrun_ccd3_acisf09595_pi14-548_cl_pass1_src10_1.ximg exists
[Wed Sep 28 03:59:39 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf09595_pi14-548_cl_pass1_src10.csv
[Wed Sep 28 03:59:39 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf09595_pi14-548_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf09595_pi14-548_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 28 03:59:39 2011] fullrun_ccd3_acisf09595_pi14-548_cl_pass1_tfrozen_src10.ximg exists
[Wed Sep 28 03:59:39 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf09595_pi14-548_cl_pass1_tfrozen_src10.csv
[Wed Sep 28 03:59:39 2011] fullrun_ccd3_acisf09595_pi14-548_cl_pass1_tfrozen_src10_1.ximg exists
[Wed Sep 28 03:59:39 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf09595_pi14-548_cl_pass1_tfrozen_src10.csv
[Wed Sep 28 03:59:39 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf09595_pi14-548_cl_pass1_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf09595_pi14-548_cl_pass1_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 28 03:59:48 2011] Spatial fit model total counts = 13.512200, observed total counts = 16.000000
[Wed Sep 28 03:59:48 2011] Offset between fit and detection position for source 10 = 0.012403 pixels
[Wed Sep 28 03:59:48 2011] 14.711418 total counts/ 0.938218 bgd. counts: snr = 14.219456
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.012403 pixels
  Position = (926.4, 227.5) = 17 40 5.75 69 1 2.2
  Extent = 0.5 (0.4-0.6)", rotation angle = 0
  Source counts = 13.8 +/- 3.8
  Background counts = 0.9
  Rate = 0.0005 +/- 0.0001
[Wed Sep 28 03:59:48 2011] Vigneting correction estimate = 1.000000
[Wed Sep 28 03:59:48 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 28 03:59:48 2011] Assessing source extent using major axis lower bound
[Wed Sep 28 03:59:48 2011] Source does appear to be extended
[Wed Sep 28 03:59:48 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 28 04:03:50 2011] Not overwriting source region fullrun_ccd3_acisf09595_pi14-548_pass1_cl_src10_src.reg
[Wed Sep 28 04:03:50 2011] Extracting stamp from image fullrun_ccd3_acisf09595_pi14-548_cl_sm2.00.img.gz, (905, 207) - (947, 248)
[Wed Sep 28 04:03:50 2011] Writing fullrun_ccd3_acisf09595_pi14-548_pass1_cl_src10.gif
[Wed Sep 28 04:04:25 2011] ../../acisf09595/products/events/fullrun_ccd3_acisf09595_pi14-548_pass1_cl_src10_src.evt and ../../acisf09595/products/events/fullrun_ccd3_acisf09595_pi14-548_pass1_cl_src10_bgd.evt exist, delete to re-create
[Wed Sep 28 04:04:25 2011] Size of ../../acisf09595/products/events/fullrun_ccd3_acisf09595_pi14-548_pass1_cl_src10_src.evt.gz[events] = 13 counts
[Wed Sep 28 04:04:25 2011] Mean chipx,y = (898.54, 814.69)
[Wed Sep 28 04:04:25 2011] Mean tdetx,y = (4317.31, 3959.54)
[Wed Sep 28 04:04:25 2011] chipx,y range = (883.00-915.00, 805.00-837.00)
[Wed Sep 28 04:04:25 2011] Size of ../../acisf09595/products/events/fullrun_ccd3_acisf09595_pi14-548_pass1_cl_src10_bgd.evt.gz[events] = 2 counts
[Wed Sep 28 04:04:25 2011] ../../acisf09595/products/images/fullrun_ccd3_acisf09595_pi14-548_pass1_cl_src10_src.img and ../../acisf09595/products/images/fullrun_ccd3_acisf09595_pi14-548_pass1_cl_src10_bgd.img exist, delete to re-create
[Wed Sep 28 04:04:25 2011] ../../acisf09595/products/spectra/fullrun_ccd3_acisf09595_pi14-548_pass1_cl_src10_src.pi and ../../acisf09595/products/spectra/fullrun_ccd3_acisf09595_pi14-548_pass1_cl_src10_bgd.pi exist, delete to re-create
[Wed Sep 28 04:04:25 2011] Not generating rmf since there are only 13 counts
[Wed Sep 28 04:04:31 2011] ../../acisf09595/products/lightcurves/fullrun_ccd3_acisf09595_pi14-548_pass1_cl_src10_src.lc and ../../acisf09595/products/lightcurves/fullrun_ccd3_acisf09595_pi14-548_pass1_cl_src10_bgd.lc exist, delete to re-create
[Wed Sep 28 04:04:49 2011] 201.794
[Wed Sep 28 04:05:22 2011] Updating aperture counts using extracted products
[Wed Sep 28 04:05:22 2011] Error reading totcts from fullrun_ccd3_acisf09595_pi14-548_pass1_cl_src10_src.pi.gz
[Wed Sep 28 04:05:22 2011] Calculating source flux in energy range 0.30-8.00
[Wed Sep 28 04:05:22 2011] Using photon index=1.80, rate=0.000503, arf fullrun_ccd3_acisf09595_pi14-548_pass1_cl_src10.arf
[Wed Sep 28 04:05:22 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Sep 28 04:05:22 2011] Updating source flux to 5.7e-15
[Wed Sep 28 04:05:34 2011] Source 10 has fewer than 100.000000 counts, skipping spectral fitting