[Wed Sep 28 03:58:06 2011] Detection parameters:
  Position = (277.1, 521.9) = 17 39 30.44 69 2 0.0
  Extent = 0.6" x 0.5", rotation angle = 20 degrees
  Source counts = 119.2 +/- 11.0
  Background counts = 1.8
  Rate = 0.004 +/- 0.0004

[Wed Sep 28 03:58:07 2011] Off-axis axis estimate = 4.06'
[Wed Sep 28 03:59:04 2011] Using EEF radius (= 0.85 ")to estimate initial spatial extent for simple fitting
[Wed Sep 28 03:59:04 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Sep 28 03:59:04 2011] Initial guess for spatial extent in simple fitting = 0.85"
[Wed Sep 28 03:59:04 2011] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.811
[Wed Sep 28 03:59:04 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 0.85"
[Wed Sep 28 03:59:04 2011] fullrun_ccd1_acisf09595_pi14-548_cl_pass0_src1.ximg exists
[Wed Sep 28 03:59:04 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf09595_pi14-548_cl_pass0_src1.csv
[Wed Sep 28 03:59:04 2011] fullrun_ccd1_acisf09595_pi14-548_cl_pass0_src1_1.ximg exists
[Wed Sep 28 03:59:04 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf09595_pi14-548_cl_pass0_src1.csv
[Wed Sep 28 03:59:04 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf09595_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf09595_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 28 03:59:04 2011] fullrun_ccd1_acisf09595_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Wed Sep 28 03:59:05 2011] fullrun_ccd1_acisf09595_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Sep 28 03:59:05 2011] Fit fullrun_ccd1_acisf09595_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Sep 28 03:59:13 2011] Spatial fit model total counts = 124.952000, observed total counts = 123.000000
[Wed Sep 28 03:59:13 2011] Offset between fit and detection position for source 8 = 0.637207 pixels
[Wed Sep 28 03:59:13 2011] 125.756130 total counts/ 7.978130 bgd. counts: snr = 41.697846
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 0.637207 pixels
  Position = (277.5, 522.4) = 17 39 30.45 69 2 0.0
  Extent = 0.7 (0.6-0.8)", rotation angle = 0
  Source counts = 117.8 +/- 11.2
  Background counts = 8.0
  Rate = 0.004 +/- 0.0004
[Wed Sep 28 03:59:13 2011] Vigneting correction estimate = 1.000000
[Wed Sep 28 03:59:13 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 28 03:59:13 2011] Assessing source extent using major axis lower bound
[Wed Sep 28 03:59:13 2011] Source does appear to be extended
[Wed Sep 28 03:59:13 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 28 03:59:37 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Sep 28 03:59:37 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Sep 28 03:59:37 2011] Initial guess for spatial extent in simple fitting = 0.73"
[Wed Sep 28 03:59:37 2011] source mask rpix=1.5, npix_max = 15, mask sum = 16, frac = 1.008
[Wed Sep 28 03:59:37 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 0.73"
[Wed Sep 28 03:59:37 2011] fullrun_ccd1_acisf09595_pi14-548_cl_pass1_src1.ximg exists
[Wed Sep 28 03:59:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf09595_pi14-548_cl_pass1_src1.csv
[Wed Sep 28 03:59:37 2011] fullrun_ccd1_acisf09595_pi14-548_cl_pass1_src1_1.ximg exists
[Wed Sep 28 03:59:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf09595_pi14-548_cl_pass1_src1.csv
[Wed Sep 28 03:59:37 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf09595_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf09595_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 28 03:59:37 2011] fullrun_ccd1_acisf09595_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Wed Sep 28 03:59:37 2011] fullrun_ccd1_acisf09595_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Sep 28 03:59:37 2011] Fit fullrun_ccd1_acisf09595_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Sep 28 03:59:46 2011] Spatial fit model total counts = 121.962000, observed total counts = 123.000000
[Wed Sep 28 03:59:46 2011] Offset between fit and detection position for source 8 = 0.012616 pixels
[Wed Sep 28 03:59:46 2011] 122.771890 total counts/ 8.066890 bgd. counts: snr = 40.385855
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 0.012616 pixels
  Position = (277.5, 522.4) = 17 39 30.45 69 2 0.0
  Extent = 0.7 (0.6-0.8)", rotation angle = 0
  Source counts = 114.7 +/- 11.1
  Background counts = 8.1
  Rate = 0.004 +/- 0.0004
[Wed Sep 28 03:59:46 2011] Vigneting correction estimate = 1.000000
[Wed Sep 28 03:59:46 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 28 03:59:46 2011] Assessing source extent using major axis lower bound
[Wed Sep 28 03:59:46 2011] Source does appear to be extended
[Wed Sep 28 03:59:46 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 28 04:01:21 2011] Not overwriting source region fullrun_ccd1_acisf09595_pi14-548_pass1_cl_src8_src.reg
[Wed Sep 28 04:01:21 2011] Extracting stamp from image fullrun_ccd1_acisf09595_pi14-548_cl_sm2.00.img.gz, (244, 489) - (311, 556)
[Wed Sep 28 04:01:21 2011] Writing fullrun_ccd1_acisf09595_pi14-548_pass1_cl_src8.gif
[Wed Sep 28 04:01:23 2011] ../../acisf09595/products/events/fullrun_ccd1_acisf09595_pi14-548_pass1_cl_src8_src.evt and ../../acisf09595/products/events/fullrun_ccd1_acisf09595_pi14-548_pass1_cl_src8_bgd.evt exist, delete to re-create
[Wed Sep 28 04:01:23 2011] Size of ../../acisf09595/products/events/fullrun_ccd1_acisf09595_pi14-548_pass1_cl_src8_src.evt.gz[events] = 121 counts
[Wed Sep 28 04:01:23 2011] Mean chipx,y = (212.82, 636.60)
[Wed Sep 28 04:01:23 2011] Mean tdetx,y = (4495.40, 4319.82)
[Wed Sep 28 04:01:23 2011] chipx,y range = (194.00-231.00, 617.00-656.00)
[Wed Sep 28 04:01:23 2011] Size of ../../acisf09595/products/events/fullrun_ccd1_acisf09595_pi14-548_pass1_cl_src8_bgd.evt.gz[events] = 14 counts
[Wed Sep 28 04:01:23 2011] ../../acisf09595/products/images/fullrun_ccd1_acisf09595_pi14-548_pass1_cl_src8_src.img and ../../acisf09595/products/images/fullrun_ccd1_acisf09595_pi14-548_pass1_cl_src8_bgd.img exist, delete to re-create
[Wed Sep 28 04:01:23 2011] ../../acisf09595/products/spectra/fullrun_ccd1_acisf09595_pi14-548_pass1_cl_src8_src.pi and ../../acisf09595/products/spectra/fullrun_ccd1_acisf09595_pi14-548_pass1_cl_src8_bgd.pi exist, delete to re-create
[Wed Sep 28 04:01:25 2011] ../../acisf09595/products/lightcurves/fullrun_ccd1_acisf09595_pi14-548_pass1_cl_src8_src.lc and ../../acisf09595/products/lightcurves/fullrun_ccd1_acisf09595_pi14-548_pass1_cl_src8_bgd.lc exist, delete to re-create
[Wed Sep 28 04:02:34 2011] Keeping rmf generated by specextract
[Wed Sep 28 04:02:34 2011] 197.128
[Wed Sep 28 04:05:21 2011] Updating aperture counts using extracted products
[Wed Sep 28 04:05:21 2011] Error reading totcts from fullrun_ccd1_acisf09595_pi14-548_pass1_cl_src8_src.pi.gz
[Wed Sep 28 04:05:21 2011] Calculating source flux in energy range 0.30-8.00
[Wed Sep 28 04:05:21 2011] Using photon index=1.80, rate=0.00419, arf fullrun_ccd1_acisf09595_pi14-548_pass1_cl_src8.arf
[Wed Sep 28 04:05:21 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Sep 28 04:05:21 2011] Updating source flux to 4.9e-14
[Wed Sep 28 04:05:33 2011] Reading fit data from acisf09595/analysis//spectral/fullrun_ccd1_acisf09595_pi14-548_pass1_cl_src8_pl.csv
[Wed Sep 28 04:05:33 2011] Spectral fit parameter nH value = 1.09796e+22
[Wed Sep 28 04:05:33 2011] Spectral fit parameter PhoIndex value = 1.64356
[Wed Sep 28 04:05:33 2011] Failed to get F(0.3-8.0) from acisf09595/analysis//spectral/fullrun_ccd1_acisf09595_pi14-548_pass1_cl_src8_pl.csv, possibly due to different flux energy range selected
[Wed Sep 28 04:05:33 2011] Calculating source flux in energy range 0.30-8.00
[Wed Sep 28 04:05:33 2011] Using Nh = 1.1e+22, photon index=1.64, rate=0.00419, arf fullrun_ccd1_acisf09595_pi14-548_pass1_cl_src8.arf
[Wed Sep 28 04:05:33 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Sep 28 04:05:33 2011] Updating source flux to 6.8e-14