[Tue Jan 17 22:12:32 2012] Detection parameters:
  Position = (1069.3, 934.6) = 3 32 26.99 -27 41 5.1
  Extent = 2.2" x 1.4", rotation angle = 158 degrees
  Source counts = 383.2 +/- 20.2
  Background counts = 26.8
  Rate = 0.01 +/- 0.0005

[Tue Jan 17 22:12:35 2012] Off-axis axis estimate = 7.22'
[Tue Jan 17 22:36:32 2012] Using EEF radius (= 2.31 ")to estimate initial spatial extent for simple fitting
[Tue Jan 17 22:36:32 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jan 17 22:36:32 2012] Initial guess for spatial extent in simple fitting = 2.31"
[Tue Jan 17 22:36:32 2012] source mask rpix=4.7, npix_max = 108, mask sum = 121, frac = 1.119
[Tue Jan 17 22:36:32 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 2.31"
[Tue Jan 17 23:00:29 2012] fullrun_ccd2_acisf09578_pi14-548_cl_pass0_src1.ximg exists
[Tue Jan 17 23:00:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf09578_pi14-548_cl_pass0_src1.csv
[Tue Jan 17 23:00:29 2012] fullrun_ccd2_acisf09578_pi14-548_cl_pass0_src1_1.ximg exists
[Tue Jan 17 23:00:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf09578_pi14-548_cl_pass0_src1.csv
[Tue Jan 17 23:00:29 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf09578_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf09578_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 17 23:00:29 2012] fullrun_ccd2_acisf09578_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Tue Jan 17 23:00:29 2012] fullrun_ccd2_acisf09578_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Jan 17 23:00:29 2012] Fit fullrun_ccd2_acisf09578_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Jan 17 23:30:33 2012] Spatial fit model total counts = 416.998000, observed total counts = 417.000000
[Tue Jan 17 23:30:33 2012] Offset between fit and detection position for source 4 = 0.664228 pixels
[Tue Jan 17 23:30:33 2012] 417.192500 total counts/ 47.471500 bgd. counts: snr = 53.660862
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.664228 pixels
  Position = (1069.6, 935.2) = 3 32 27.00 -27 41 5.1
  Extent = 2.1 (1.9-2.2)", rotation angle = 0
  Source counts = 369.7 +/- 20.4
  Background counts = 47.5
  Rate = 0.01 +/- 0.0005
[Tue Jan 17 23:30:33 2012] Vigneting correction estimate = 1.000000
[Tue Jan 17 23:30:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 17 23:30:33 2012] Assessing source extent using major axis lower bound
[Tue Jan 17 23:30:33 2012] Source does appear to be extended
[Tue Jan 17 23:30:33 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 17 23:51:17 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jan 17 23:51:17 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jan 17 23:51:17 2012] Initial guess for spatial extent in simple fitting = 2.06"
[Tue Jan 17 23:51:17 2012] source mask rpix=4.2, npix_max = 87, mask sum = 81, frac = 0.923
[Tue Jan 17 23:51:17 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 2.06"
[Wed Jan 18 00:14:52 2012] fullrun_ccd2_acisf09578_pi14-548_cl_pass1_src1.ximg exists
[Wed Jan 18 00:14:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf09578_pi14-548_cl_pass1_src1.csv
[Wed Jan 18 00:14:52 2012] fullrun_ccd2_acisf09578_pi14-548_cl_pass1_src1_1.ximg exists
[Wed Jan 18 00:14:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf09578_pi14-548_cl_pass1_src1.csv
[Wed Jan 18 00:14:52 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf09578_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf09578_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jan 18 00:14:52 2012] fullrun_ccd2_acisf09578_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Wed Jan 18 00:14:52 2012] fullrun_ccd2_acisf09578_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Jan 18 00:14:52 2012] Fit fullrun_ccd2_acisf09578_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Jan 18 00:44:45 2012] Spatial fit model total counts = 411.964000, observed total counts = 412.000000
[Wed Jan 18 00:44:45 2012] Offset between fit and detection position for source 4 = 0.007836 pixels
[Wed Jan 18 00:44:45 2012] 412.095100 total counts/ 51.224100 bgd. counts: snr = 50.421390
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.007836 pixels
  Position = (1069.6, 935.2) = 3 32 27.00 -27 41 5.1
  Extent = 2.0 (1.8-2.2)", rotation angle = 0
  Source counts = 360.9 +/- 20.3
  Background counts = 51.2
  Rate = 0.009 +/- 0.0005
[Wed Jan 18 00:44:45 2012] Vigneting correction estimate = 1.000000
[Wed Jan 18 00:44:45 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jan 18 00:44:45 2012] Assessing source extent using major axis lower bound
[Wed Jan 18 00:44:45 2012] Source does appear to be extended
[Wed Jan 18 00:44:45 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jan 18 00:58:17 2012] Writing source region out to fullrun_ccd2_acisf09578_pi14-548_pass1_cl_src4_src.reg
[Wed Jan 18 00:58:17 2012] Extracting stamp from image fullrun_ccd2_acisf09578_pi14-548_cl_sm2.00.img.gz, (978, 843) - (1162, 1027)
[Wed Jan 18 00:58:17 2012] Writing fullrun_ccd2_acisf09578_pi14-548_pass1_cl_src4.gif
[Wed Jan 18 00:58:21 2012] Size of ../../acisf09578/products/events/fullrun_ccd2_acisf09578_pi14-548_pass1_cl_src4_src.evt.gz[events] = 401 counts
[Wed Jan 18 00:58:21 2012] Mean chipx,y = (904.23, 760.59)
[Wed Jan 18 00:58:21 2012] Mean tdetx,y = (3821.59, 3181.77)
[Wed Jan 18 00:58:21 2012] chipx,y range = (877.00-924.00, 735.00-787.00)
[Wed Jan 18 00:58:21 2012] Size of ../../acisf09578/products/events/fullrun_ccd2_acisf09578_pi14-548_pass1_cl_src4_bgd.evt.gz[events] = 133 counts
[Wed Jan 18 00:58:22 2012] rmf not found, will run specextract
[Wed Jan 18 00:58:22 2012] arf not found, will run specextract
[Wed Jan 18 00:58:50 2012] ../../acisf09578/products/spectra/fullrun_ccd2_acisf09578_pi14-548_pass1_cl_src4.warf not found
[Wed Jan 18 00:58:50 2012] ../../acisf09578/products/spectra/fullrun_ccd2_acisf09578_pi14-548_pass1_cl_src4.wrmf not found
[Wed Jan 18 00:58:50 2012] Removal of ../../acisf09578/products/spectra/fullrun_ccd2_acisf09578_pi14-548_pass1_cl_src4.soff failed
[Wed Jan 18 01:13:02 2012] Keeping rmf generated by specextract
[Wed Jan 18 01:13:02 2012] 157.401
[Wed Jan 18 01:24:31 2012] Updating aperture counts using extracted products
[Wed Jan 18 01:24:31 2012] Error reading totcts from fullrun_ccd2_acisf09578_pi14-548_pass1_cl_src4_src.pi.gz
[Wed Jan 18 01:24:31 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jan 18 01:24:31 2012] Using photon index=1.80, rate=0.00936, arf fullrun_ccd2_acisf09578_pi14-548_pass1_cl_src4.arf
[Wed Jan 18 01:24:31 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Jan 18 01:24:31 2012] Updating source flux to 1.4e-13
[Wed Jan 18 01:24:48 2012] Reading fit data from acisf09578/analysis//spectral/fullrun_ccd2_acisf09578_pi14-548_pass1_cl_src4_pl.csv
[Wed Jan 18 01:24:48 2012] Spectral fit parameter nH value = 1.65043e+13
[Wed Jan 18 01:24:48 2012] Spectral fit parameter PhoIndex value = 1.99883
[Wed Jan 18 01:24:48 2012] Failed to get F(0.3-8.0) from acisf09578/analysis//spectral/fullrun_ccd2_acisf09578_pi14-548_pass1_cl_src4_pl.csv, possibly due to different flux energy range selected
[Wed Jan 18 01:24:48 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jan 18 01:24:48 2012] Using Nh = 1.7e+13, photon index=2.00, rate=0.00936, arf fullrun_ccd2_acisf09578_pi14-548_pass1_cl_src4.arf
[Wed Jan 18 01:24:48 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Jan 18 01:24:48 2012] Updating source flux to 1.4e-13