[Tue Jan 17 22:12:28 2012] Detection parameters:
  Position = (864.2, 434.6) = 3 32 50.18 -27 52 52.5
  Extent = 1.8" x 1.3", rotation angle = 25 degrees
  Source counts = 24.0 +/- 5.5
  Background counts = 6.0
  Rate = 0.0006 +/- 0.0001

[Tue Jan 17 22:12:29 2012] Off-axis axis estimate = 6.44'
[Tue Jan 17 22:14:44 2012] Using EEF radius (= 1.86 ")to estimate initial spatial extent for simple fitting
[Tue Jan 17 22:14:44 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jan 17 22:14:44 2012] Initial guess for spatial extent in simple fitting = 1.86"
[Tue Jan 17 22:14:44 2012] source mask rpix=3.8, npix_max = 73, mask sum = 81, frac = 1.107
[Tue Jan 17 22:14:44 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 1.86"
[Tue Jan 17 22:28:13 2012] fullrun_ccd0_acisf09578_pi14-548_cl_pass0_src1.ximg exists
[Tue Jan 17 22:28:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf09578_pi14-548_cl_pass0_src1.csv
[Tue Jan 17 22:28:13 2012] fullrun_ccd0_acisf09578_pi14-548_cl_pass0_src1_1.ximg exists
[Tue Jan 17 22:28:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf09578_pi14-548_cl_pass0_src1.csv
[Tue Jan 17 22:28:13 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf09578_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf09578_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 17 22:28:14 2012] fullrun_ccd0_acisf09578_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Tue Jan 17 22:28:14 2012] fullrun_ccd0_acisf09578_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Jan 17 22:28:14 2012] Fit fullrun_ccd0_acisf09578_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Jan 17 23:30:30 2012] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 21.463397 pixels away
[Tue Jan 17 23:30:30 2012] Vigneting correction estimate = 1.000000
[Tue Jan 17 23:30:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 17 23:30:30 2012] Assessing source extent using major
[Tue Jan 17 23:30:30 2012] Source does appear to be extended
[Tue Jan 17 23:30:30 2012] Computing asymmetry using major and minor axis, asym = 1.41
[Tue Jan 17 23:30:53 2012] Using EEF radius (= 1.86 ")to estimate initial spatial extent for simple fitting
[Tue Jan 17 23:30:53 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jan 17 23:30:53 2012] Initial guess for spatial extent in simple fitting = 1.86"
[Tue Jan 17 23:30:53 2012] source mask rpix=3.8, npix_max = 73, mask sum = 81, frac = 1.107
[Tue Jan 17 23:30:53 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 1.86"
[Tue Jan 17 23:43:41 2012] fullrun_ccd0_acisf09578_pi14-548_cl_pass1_src1.ximg exists
[Tue Jan 17 23:43:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf09578_pi14-548_cl_pass1_src1.csv
[Tue Jan 17 23:43:41 2012] fullrun_ccd0_acisf09578_pi14-548_cl_pass1_src1_1.ximg exists
[Tue Jan 17 23:43:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf09578_pi14-548_cl_pass1_src1.csv
[Tue Jan 17 23:43:41 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf09578_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf09578_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 17 23:43:41 2012] fullrun_ccd0_acisf09578_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Tue Jan 17 23:43:41 2012] fullrun_ccd0_acisf09578_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Jan 17 23:43:41 2012] Fit fullrun_ccd0_acisf09578_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Jan 18 00:44:42 2012] Spatial fit model total counts = 34.794100, observed total counts = 35.000000
[Wed Jan 18 00:44:42 2012] Offset between fit and detection position for source 1 = 0.803032 pixels
[Wed Jan 18 00:44:42 2012] 34.612700 total counts/ 3.801500 bgd. counts: snr = 15.802693
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.803032 pixels
  Position = (865.0, 434.9) = 3 32 50.17 -27 52 52.7
  Extent = 2.3 (0.8-3.1)", rotation angle = 0
  Source counts = 30.8 +/- 5.9
  Background counts = 3.8
  Rate = 0.0008 +/- 0.0002
[Wed Jan 18 00:44:42 2012] Vigneting correction estimate = 1.000000
[Wed Jan 18 00:44:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jan 18 00:44:42 2012] Assessing source extent using major axis lower bound
[Wed Jan 18 00:44:42 2012] Source does appear to be extended
[Wed Jan 18 00:44:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jan 18 00:45:03 2012] Writing source region out to fullrun_ccd0_acisf09578_pi14-548_pass1_cl_src1_src.reg
[Wed Jan 18 00:45:03 2012] Extracting stamp from image fullrun_ccd0_acisf09578_pi14-548_cl_sm2.00.img.gz, (759, 329) - (971, 541)
[Wed Jan 18 00:45:03 2012] Writing fullrun_ccd0_acisf09578_pi14-548_pass1_cl_src1.gif
[Wed Jan 18 00:45:06 2012] Size of ../../acisf09578/products/events/fullrun_ccd0_acisf09578_pi14-548_pass1_cl_src1_src.evt.gz[events] = 36 counts
[Wed Jan 18 00:45:06 2012] Mean chipx,y = (377.81, 777.00)
[Wed Jan 18 00:45:06 2012] Mean tdetx,y = (3838.00, 4754.19)
[Wed Jan 18 00:45:06 2012] chipx,y range = (355.00-408.00, 754.00-807.00)
[Wed Jan 18 00:45:06 2012] Size of ../../acisf09578/products/events/fullrun_ccd0_acisf09578_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 183 counts
[Wed Jan 18 00:45:07 2012] Not generating rmf since there are only 30 counts
[Wed Jan 18 00:45:07 2012] arf not found, will run specextract
[Wed Jan 18 00:45:33 2012] ../../acisf09578/products/spectra/fullrun_ccd0_acisf09578_pi14-548_pass1_cl_src1.warf not found
[Wed Jan 18 00:45:33 2012] ../../acisf09578/products/spectra/fullrun_ccd0_acisf09578_pi14-548_pass1_cl_src1.wrmf not found
[Wed Jan 18 00:45:33 2012] Removal of ../../acisf09578/products/spectra/fullrun_ccd0_acisf09578_pi14-548_pass1_cl_src1.soff failed
[Wed Jan 18 00:52:16 2012] Spectrum 1 has only 31 counts, deleting rmf
[Wed Jan 18 00:52:16 2012] 181.26
[Wed Jan 18 01:24:30 2012] Updating aperture counts using extracted products
[Wed Jan 18 01:24:30 2012] Error reading totcts from fullrun_ccd0_acisf09578_pi14-548_pass1_cl_src1_src.pi.gz
[Wed Jan 18 01:24:30 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jan 18 01:24:30 2012] Using photon index=1.80, rate=0.000799, arf fullrun_ccd0_acisf09578_pi14-548_pass1_cl_src1.arf
[Wed Jan 18 01:24:30 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Jan 18 01:24:30 2012] Updating source flux to 1e-14
[Wed Jan 18 01:24:35 2012] Source 1 has fewer than 100.000000 counts, skipping spectral fitting
[Wed Jan 18 01:24:36 2012] acisf09578/analysis//spectral/fullrun_ccd0_acisf09578_pi14-548_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete