[Sat Oct 29 02:35:48 2011] Detection parameters:
  Position = (474.9, 259.2) = 17 47 14.62 -29 32 17.6
  Extent = 2.3" x 1.3", rotation angle = 43 degrees
  Source counts = 128.7 +/- 11.7
  Background counts = 8.3
  Rate = 0.009 +/- 0.0008

[Sat Oct 29 02:35:48 2011] Off-axis axis estimate = 7.09'
[Sat Oct 29 02:36:18 2011] Using EEF radius (= 2.24 ")to estimate initial spatial extent for simple fitting
[Sat Oct 29 02:36:18 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Oct 29 02:36:18 2011] Initial guess for spatial extent in simple fitting = 2.24"
[Sat Oct 29 02:36:18 2011] source mask rpix=4.5, npix_max = 101, mask sum = 100, frac = 0.981
[Sat Oct 29 02:36:18 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 2.24"
[Sat Oct 29 02:36:18 2011] fullrun_ccd3_acisf09560_pi14-548_cl_pass0_src1.ximg exists
[Sat Oct 29 02:36:18 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf09560_pi14-548_cl_pass0_src1.csv
[Sat Oct 29 02:36:18 2011] fullrun_ccd3_acisf09560_pi14-548_cl_pass0_src1_1.ximg exists
[Sat Oct 29 02:36:18 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf09560_pi14-548_cl_pass0_src1.csv
[Sat Oct 29 02:36:18 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf09560_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf09560_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 29 02:36:18 2011] fullrun_ccd3_acisf09560_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Sat Oct 29 02:36:18 2011] fullrun_ccd3_acisf09560_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Oct 29 02:36:18 2011] Fit fullrun_ccd3_acisf09560_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Sat Oct 29 02:36:23 2011] Spatial fit model total counts = 139.878000, observed total counts = 141.000000
[Sat Oct 29 02:36:23 2011] Offset between fit and detection position for source 15 = 0.917729 pixels
[Sat Oct 29 02:36:23 2011] 139.509500 total counts/ 22.553500 bgd. counts: snr = 24.627228
Spatial fit parameters:
  Offset between fit and detection position for source 15 = 0.917729 pixels
  Position = (475.8, 259.5) = 17 47 14.60 -29 32 17.7
  Extent = 1.9 (1.6-2.2)", rotation angle = 0
  Source counts = 117.0 +/- 11.8
  Background counts = 22.6
  Rate = 0.008 +/- 0.0008
[Sat Oct 29 02:36:23 2011] Vigneting correction estimate = 1.000000
[Sat Oct 29 02:36:23 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 29 02:36:23 2011] Assessing source extent using major axis lower bound
[Sat Oct 29 02:36:23 2011] Source does appear to be extended
[Sat Oct 29 02:36:23 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 29 02:36:36 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Oct 29 02:36:36 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Oct 29 02:36:36 2011] Initial guess for spatial extent in simple fitting = 1.86"
[Sat Oct 29 02:36:36 2011] source mask rpix=3.8, npix_max = 73, mask sum = 81, frac = 1.104
[Sat Oct 29 02:36:36 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 1.86"
[Sat Oct 29 02:36:36 2011] fullrun_ccd3_acisf09560_pi14-548_cl_pass1_src1.ximg exists
[Sat Oct 29 02:36:36 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf09560_pi14-548_cl_pass1_src1.csv
[Sat Oct 29 02:36:36 2011] fullrun_ccd3_acisf09560_pi14-548_cl_pass1_src1_1.ximg exists
[Sat Oct 29 02:36:36 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf09560_pi14-548_cl_pass1_src1.csv
[Sat Oct 29 02:36:36 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf09560_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf09560_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 29 02:36:37 2011] fullrun_ccd3_acisf09560_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Sat Oct 29 02:36:37 2011] fullrun_ccd3_acisf09560_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Oct 29 02:36:37 2011] Fit fullrun_ccd3_acisf09560_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Sat Oct 29 02:36:41 2011] Spatial fit model total counts = 134.697000, observed total counts = 135.000000
[Sat Oct 29 02:36:41 2011] Offset between fit and detection position for source 15 = 0.185998 pixels
[Sat Oct 29 02:36:41 2011] 134.751800 total counts/ 24.073800 bgd. counts: snr = 22.557397
Spatial fit parameters:
  Offset between fit and detection position for source 15 = 0.185998 pixels
  Position = (475.7, 259.3) = 17 47 14.61 -29 32 17.8
  Extent = 1.7 (1.4-2.1)", rotation angle = 0
  Source counts = 110.7 +/- 11.6
  Background counts = 24.1
  Rate = 0.008 +/- 0.0008
[Sat Oct 29 02:36:41 2011] Vigneting correction estimate = 1.000000
[Sat Oct 29 02:36:41 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 29 02:36:41 2011] Assessing source extent using major axis lower bound
[Sat Oct 29 02:36:41 2011] Source does appear to be extended
[Sat Oct 29 02:36:41 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 29 02:38:29 2011] Not overwriting source region fullrun_ccd3_acisf09560_pi14-548_pass1_cl_src15_src.reg
[Sat Oct 29 02:38:29 2011] Extracting stamp from image fullrun_ccd3_acisf09560_pi14-548_cl_sm2.00.img.gz, (396, 180) - (555, 339)
[Sat Oct 29 02:38:29 2011] Writing fullrun_ccd3_acisf09560_pi14-548_pass1_cl_src15.gif
[Sat Oct 29 02:38:29 2011] ../../acisf09560/products/events/fullrun_ccd3_acisf09560_pi14-548_pass1_cl_src15_src.evt and ../../acisf09560/products/events/fullrun_ccd3_acisf09560_pi14-548_pass1_cl_src15_bgd.evt exist, delete to re-create
[Sat Oct 29 02:38:29 2011] Size of ../../acisf09560/products/events/fullrun_ccd3_acisf09560_pi14-548_pass1_cl_src15_src.evt.gz[events] = 131 counts
[Sat Oct 29 02:38:29 2011] Mean chipx,y = (615.25, 224.47)
[Sat Oct 29 02:38:29 2011] Mean tdetx,y = (4907.53, 3676.25)
[Sat Oct 29 02:38:29 2011] chipx,y range = (590.00-639.00, 203.00-247.00)
[Sat Oct 29 02:38:29 2011] Size of ../../acisf09560/products/events/fullrun_ccd3_acisf09560_pi14-548_pass1_cl_src15_bgd.evt.gz[events] = 52 counts
[Sat Oct 29 02:38:29 2011] ../../acisf09560/products/images/fullrun_ccd3_acisf09560_pi14-548_pass1_cl_src15_src.img and ../../acisf09560/products/images/fullrun_ccd3_acisf09560_pi14-548_pass1_cl_src15_bgd.img exist, delete to re-create
[Sat Oct 29 02:38:29 2011] ../../acisf09560/products/spectra/fullrun_ccd3_acisf09560_pi14-548_pass1_cl_src15_src.pi and ../../acisf09560/products/spectra/fullrun_ccd3_acisf09560_pi14-548_pass1_cl_src15_bgd.pi exist, delete to re-create
[Sat Oct 29 02:38:32 2011] ../../acisf09560/products/lightcurves/fullrun_ccd3_acisf09560_pi14-548_pass1_cl_src15_src.lc and ../../acisf09560/products/lightcurves/fullrun_ccd3_acisf09560_pi14-548_pass1_cl_src15_bgd.lc exist, delete to re-create
[Sat Oct 29 02:38:57 2011] Keeping rmf generated by specextract
[Sat Oct 29 02:38:57 2011] 176.968
[Sat Oct 29 02:39:00 2011] Updating aperture counts using extracted products
[Sat Oct 29 02:39:00 2011] Error reading totcts from fullrun_ccd3_acisf09560_pi14-548_pass1_cl_src15_src.pi.gz
[Sat Oct 29 02:39:00 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct 29 02:39:00 2011] Using photon index=1.80, rate=0.00757, arf fullrun_ccd3_acisf09560_pi14-548_pass1_cl_src15.arf
[Sat Oct 29 02:39:00 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct 29 02:39:00 2011] Updating source flux to 1.3e-13
[Sat Oct 29 02:39:10 2011] Reading fit data from acisf09560/analysis//spectral/fullrun_ccd3_acisf09560_pi14-548_pass1_cl_src15_pl.csv
[Sat Oct 29 02:39:10 2011] Spectral fit parameter nH value = 2.19175e+22
[Sat Oct 29 02:39:10 2011] Spectral fit parameter PhoIndex value = 2.72473
[Sat Oct 29 02:39:10 2011] Failed to get F(0.3-8.0) from acisf09560/analysis//spectral/fullrun_ccd3_acisf09560_pi14-548_pass1_cl_src15_pl.csv, possibly due to different flux energy range selected
[Sat Oct 29 02:39:10 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct 29 02:39:10 2011] Using Nh = 2.2e+22, photon index=2.72, rate=0.00757, arf fullrun_ccd3_acisf09560_pi14-548_pass1_cl_src15.arf
[Sat Oct 29 02:39:10 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct 29 02:39:10 2011] Updating source flux to 1.1e-13