[Sat Oct 29 02:35:45 2011] Detection parameters:
  Position = (602.8, 1051.8) = 17 47 49.06 -29 26 24.5
  Extent = 0.5" x 0.5", rotation angle = 148 degrees
  Source counts = 18.5 +/- 4.4
  Background counts = 0.5
  Rate = 0.001 +/- 0.0003

[Sat Oct 29 02:35:46 2011] Off-axis axis estimate = 4.26'
[Sat Oct 29 02:36:17 2011] Using EEF radius (= 0.91 ")to estimate initial spatial extent for simple fitting
[Sat Oct 29 02:36:17 2011] Initial guess for spatial extent in simple fitting = 0.91"
[Sat Oct 29 02:36:17 2011] source mask rpix=1.9, npix_max = 22, mask sum = 25, frac = 1.128
[Sat Oct 29 02:36:17 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 0.91"
[Sat Oct 29 02:36:17 2011] fullrun_ccd1_acisf09560_pi14-548_cl_pass0_src3.ximg exists
[Sat Oct 29 02:36:17 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf09560_pi14-548_cl_pass0_src3.csv
[Sat Oct 29 02:36:17 2011] fullrun_ccd1_acisf09560_pi14-548_cl_pass0_src3_1.ximg exists
[Sat Oct 29 02:36:17 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf09560_pi14-548_cl_pass0_src3.csv
[Sat Oct 29 02:36:17 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf09560_pi14-548_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf09560_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 29 02:36:17 2011] fullrun_ccd1_acisf09560_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Sat Oct 29 02:36:17 2011] fullrun_ccd1_acisf09560_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Sat Oct 29 02:36:17 2011] Fit fullrun_ccd1_acisf09560_pi14-548_cl_pass0_tfrozen_src3 appears to have run properly
[Sat Oct 29 02:36:21 2011] Spatial fit model total counts = 22.619400, observed total counts = 24.000000
[Sat Oct 29 02:36:21 2011] Offset between fit and detection position for source 3 = 0.536016 pixels
[Sat Oct 29 02:36:21 2011] 22.782300 total counts/ 0.000000 bgd. counts: snr = 241033961264902.281250
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.536016 pixels
  Position = (603.3, 1051.9) = 17 47 49.06 -29 26 24.7
  Extent = 0.9 (0.7-1.1)", rotation angle = 0
  Source counts = 22.8 +/- 4.8
  Background counts = 0.0
  Rate = 0.002 +/- 0.0003
[Sat Oct 29 02:36:21 2011] Vigneting correction estimate = 1.000000
[Sat Oct 29 02:36:21 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 29 02:36:21 2011] Assessing source extent using major axis lower bound
[Sat Oct 29 02:36:21 2011] Source does appear to be extended
[Sat Oct 29 02:36:21 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 29 02:36:35 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Oct 29 02:36:35 2011] Initial guess for spatial extent in simple fitting = 0.91"
[Sat Oct 29 02:36:35 2011] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.912
[Sat Oct 29 02:36:35 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 0.91"
[Sat Oct 29 02:36:36 2011] fullrun_ccd1_acisf09560_pi14-548_cl_pass1_src3.ximg exists
[Sat Oct 29 02:36:36 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf09560_pi14-548_cl_pass1_src3.csv
[Sat Oct 29 02:36:36 2011] fullrun_ccd1_acisf09560_pi14-548_cl_pass1_src3_1.ximg exists
[Sat Oct 29 02:36:36 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf09560_pi14-548_cl_pass1_src3.csv
[Sat Oct 29 02:36:36 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf09560_pi14-548_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf09560_pi14-548_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 29 02:36:36 2011] fullrun_ccd1_acisf09560_pi14-548_cl_pass1_tfrozen_src3.ximg exists
[Sat Oct 29 02:36:36 2011] fullrun_ccd1_acisf09560_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists
[Sat Oct 29 02:36:36 2011] Fit fullrun_ccd1_acisf09560_pi14-548_cl_pass1_tfrozen_src3 appears to have run properly
[Sat Oct 29 02:36:40 2011] Spatial fit model total counts = 22.036900, observed total counts = 24.000000
[Sat Oct 29 02:36:40 2011] Offset between fit and detection position for source 3 = 0.046456 pixels
[Sat Oct 29 02:36:40 2011] 22.087000 total counts/ 0.000000 bgd. counts: snr = 143084613741690.843750
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.046456 pixels
  Position = (603.3, 1051.9) = 17 47 49.06 -29 26 24.7
  Extent = 0.9 (0.7-1.1)", rotation angle = 0
  Source counts = 22.1 +/- 4.7
  Background counts = 0.0
  Rate = 0.002 +/- 0.0003
[Sat Oct 29 02:36:40 2011] Vigneting correction estimate = 1.000000
[Sat Oct 29 02:36:40 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 29 02:36:40 2011] Assessing source extent using major axis lower bound
[Sat Oct 29 02:36:40 2011] Source does appear to be extended
[Sat Oct 29 02:36:40 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 29 02:37:29 2011] Not overwriting source region fullrun_ccd1_acisf09560_pi14-548_pass1_cl_src3_src.reg
[Sat Oct 29 02:37:29 2011] Extracting stamp from image fullrun_ccd1_acisf09560_pi14-548_cl_sm2.00.img.gz, (561, 1010) - (645, 1094)
[Sat Oct 29 02:37:29 2011] Writing fullrun_ccd1_acisf09560_pi14-548_pass1_cl_src3.gif
[Sat Oct 29 02:37:35 2011] ../../acisf09560/products/events/fullrun_ccd1_acisf09560_pi14-548_pass1_cl_src3_src.evt and ../../acisf09560/products/events/fullrun_ccd1_acisf09560_pi14-548_pass1_cl_src3_bgd.evt exist, delete to re-create
[Sat Oct 29 02:37:35 2011] Size of ../../acisf09560/products/events/fullrun_ccd1_acisf09560_pi14-548_pass1_cl_src3_src.evt.gz[events] = 23 counts
[Sat Oct 29 02:37:35 2011] Mean chipx,y = (430.17, 1007.61)
[Sat Oct 29 02:37:35 2011] Mean tdetx,y = (4124.39, 4537.17)
[Sat Oct 29 02:37:35 2011] chipx,y range = (411.00-447.00, 995.00-1022.00)
[Sat Oct 29 02:37:35 2011] Size of ../../acisf09560/products/events/fullrun_ccd1_acisf09560_pi14-548_pass1_cl_src3_bgd.evt.gz[events] = 5 counts
[Sat Oct 29 02:37:35 2011] ../../acisf09560/products/images/fullrun_ccd1_acisf09560_pi14-548_pass1_cl_src3_src.img and ../../acisf09560/products/images/fullrun_ccd1_acisf09560_pi14-548_pass1_cl_src3_bgd.img exist, delete to re-create
[Sat Oct 29 02:37:35 2011] ../../acisf09560/products/spectra/fullrun_ccd1_acisf09560_pi14-548_pass1_cl_src3_src.pi and ../../acisf09560/products/spectra/fullrun_ccd1_acisf09560_pi14-548_pass1_cl_src3_bgd.pi exist, delete to re-create
[Sat Oct 29 02:37:35 2011] Not generating rmf since there are only 22 counts
[Sat Oct 29 02:37:39 2011] ../../acisf09560/products/lightcurves/fullrun_ccd1_acisf09560_pi14-548_pass1_cl_src3_src.lc and ../../acisf09560/products/lightcurves/fullrun_ccd1_acisf09560_pi14-548_pass1_cl_src3_bgd.lc exist, delete to re-create
[Sat Oct 29 02:37:59 2011] 139.443
[Sat Oct 29 02:39:00 2011] Updating aperture counts using extracted products
[Sat Oct 29 02:39:00 2011] Error reading totcts from fullrun_ccd1_acisf09560_pi14-548_pass1_cl_src3_src.pi.gz
[Sat Oct 29 02:39:00 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct 29 02:39:00 2011] Using photon index=1.80, rate=0.00151, arf fullrun_ccd1_acisf09560_pi14-548_pass1_cl_src3.arf
[Sat Oct 29 02:39:00 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct 29 02:39:00 2011] Updating source flux to 3.2e-14
[Sat Oct 29 02:39:03 2011] Source 3 has fewer than 100.000000 counts, skipping spectral fitting
[Sat Oct 29 02:39:04 2011] acisf09560/analysis//spectral/fullrun_ccd1_acisf09560_pi14-548_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete