[Fri Sep 23 19:21:19 2011] Detection parameters:
  Position = (946.8, 923.6) = 0 24 15.22 -72 4 43.1
  Extent = 0.7" x 0.5", rotation angle = 129 degrees
  Source counts = 23.8 +/- 5.1
  Background counts = 2.2
  Rate = 0.0008 +/- 0.0002

[Fri Sep 23 19:21:23 2011] Off-axis axis estimate = 1.64'
[Fri Sep 23 19:22:47 2011] Using EEF radius (= 0.40 ")to estimate initial spatial extent for simple fitting
[Fri Sep 23 19:22:47 2011] Initial guess for spatial extent in simple fitting = 0.40"
[Fri Sep 23 19:22:47 2011] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.869
[Fri Sep 23 19:22:47 2011] Giving source the simple spatial ID 28 for pass 0, mean size = 0.40"
[Fri Sep 23 19:22:48 2011] fullrun_ccd3_acisf00955_pi14-548_cl_pass0_src28.ximg exists
[Fri Sep 23 19:22:48 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf00955_pi14-548_cl_pass0_src28.csv
[Fri Sep 23 19:22:48 2011] fullrun_ccd3_acisf00955_pi14-548_cl_pass0_src28_1.ximg exists
[Fri Sep 23 19:22:48 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf00955_pi14-548_cl_pass0_src28.csv
[Fri Sep 23 19:22:48 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf00955_pi14-548_cl_pass0_src28_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf00955_pi14-548_cl_pass0_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 23 19:22:52 2011] fullrun_ccd3_acisf00955_pi14-548_cl_pass0_tfrozen_src28.ximg exists
[Fri Sep 23 19:22:52 2011] fullrun_ccd3_acisf00955_pi14-548_cl_pass0_tfrozen_src28_1.ximg exists
[Fri Sep 23 19:22:52 2011] Fit fullrun_ccd3_acisf00955_pi14-548_cl_pass0_tfrozen_src28 appears to have run properly
[Fri Sep 23 19:23:09 2011] Spatial fit model total counts = 27.035400, observed total counts = 28.000000
[Fri Sep 23 19:23:09 2011] Offset between fit and detection position for source 46 = 1.046716 pixels
[Fri Sep 23 19:23:09 2011] 27.014220 total counts/ 6.149420 bgd. counts: snr = 8.413896
Spatial fit parameters:
  Offset between fit and detection position for source 46 = 1.046716 pixels
  Position = (947.9, 923.6) = 0 24 15.16 -72 4 43.4
  Extent = 0.5 (0.4-0.8)", rotation angle = 0
  Source counts = 20.9 +/- 5.2
  Background counts = 6.1
  Rate = 0.0007 +/- 0.0002
[Fri Sep 23 19:23:09 2011] Vigneting correction estimate = 1.000000
[Fri Sep 23 19:23:09 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 23 19:23:09 2011] Assessing source extent using major axis lower bound
[Fri Sep 23 19:23:09 2011] Source does appear to be extended
[Fri Sep 23 19:23:09 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 23 19:23:37 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Sep 23 19:23:37 2011] Initial guess for spatial extent in simple fitting = 0.49"
[Fri Sep 23 19:23:37 2011] source mask rpix=1.0, npix_max = 8, mask sum = 9, frac = 1.008
[Fri Sep 23 19:23:37 2011] Giving source the simple spatial ID 28 for pass 1, mean size = 0.49"
[Fri Sep 23 19:23:38 2011] fullrun_ccd3_acisf00955_pi14-548_cl_pass1_src28.ximg exists
[Fri Sep 23 19:23:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf00955_pi14-548_cl_pass1_src28.csv
[Fri Sep 23 19:23:38 2011] fullrun_ccd3_acisf00955_pi14-548_cl_pass1_src28_1.ximg exists
[Fri Sep 23 19:23:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf00955_pi14-548_cl_pass1_src28.csv
[Fri Sep 23 19:23:38 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf00955_pi14-548_cl_pass1_src28_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf00955_pi14-548_cl_pass1_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 23 19:23:39 2011] fullrun_ccd3_acisf00955_pi14-548_cl_pass1_tfrozen_src28.ximg exists
[Fri Sep 23 19:23:39 2011] fullrun_ccd3_acisf00955_pi14-548_cl_pass1_tfrozen_src28_1.ximg exists
[Fri Sep 23 19:23:39 2011] Fit fullrun_ccd3_acisf00955_pi14-548_cl_pass1_tfrozen_src28 appears to have run properly
[Fri Sep 23 19:23:59 2011] Spatial fit model total counts = 27.075900, observed total counts = 29.000000
[Fri Sep 23 19:23:59 2011] Offset between fit and detection position for source 46 = 0.003567 pixels
[Fri Sep 23 19:23:59 2011] 26.675240 total counts/ 6.019540 bgd. counts: snr = 8.418956
Spatial fit parameters:
  Offset between fit and detection position for source 46 = 0.003567 pixels
  Position = (947.9, 923.6) = 0 24 15.16 -72 4 43.4
  Extent = 0.5 (0.4-0.7)", rotation angle = 0
  Source counts = 20.7 +/- 5.2
  Background counts = 6.0
  Rate = 0.0007 +/- 0.0002
[Fri Sep 23 19:23:59 2011] Vigneting correction estimate = 1.000000
[Fri Sep 23 19:23:59 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 23 19:23:59 2011] Assessing source extent using major axis lower bound
[Fri Sep 23 19:23:59 2011] Source does appear to be extended
[Fri Sep 23 19:23:59 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 23 19:27:55 2011] Not overwriting source region fullrun_ccd3_acisf00955_pi14-548_pass1_cl_src46_src.reg
[Fri Sep 23 19:27:55 2011] Extracting stamp from image fullrun_ccd3_acisf00955_pi14-548_cl_sm2.00.img.gz, (925, 901) - (971, 946)
[Fri Sep 23 19:27:55 2011] Writing fullrun_ccd3_acisf00955_pi14-548_pass1_cl_src46.gif
[Fri Sep 23 19:29:41 2011] ../../acisf00955/products/events/fullrun_ccd3_acisf00955_pi14-548_pass1_cl_src46_src.evt and ../../acisf00955/products/events/fullrun_ccd3_acisf00955_pi14-548_pass1_cl_src46_bgd.evt exist, delete to re-create
[Fri Sep 23 19:29:41 2011] Size of ../../acisf00955/products/events/fullrun_ccd3_acisf00955_pi14-548_pass1_cl_src46_src.evt.gz[events] = 23 counts
[Fri Sep 23 19:29:41 2011] Mean chipx,y = (893.43, 807.52)
[Fri Sep 23 19:29:41 2011] Mean tdetx,y = (4324.48, 3954.43)
[Fri Sep 23 19:29:41 2011] chipx,y range = (880.00-913.00, 793.00-828.00)
[Fri Sep 23 19:29:41 2011] Size of ../../acisf00955/products/events/fullrun_ccd3_acisf00955_pi14-548_pass1_cl_src46_bgd.evt.gz[events] = 20 counts
[Fri Sep 23 19:29:41 2011] ../../acisf00955/products/images/fullrun_ccd3_acisf00955_pi14-548_pass1_cl_src46_src.img and ../../acisf00955/products/images/fullrun_ccd3_acisf00955_pi14-548_pass1_cl_src46_bgd.img exist, delete to re-create
[Fri Sep 23 19:29:41 2011] ../../acisf00955/products/spectra/fullrun_ccd3_acisf00955_pi14-548_pass1_cl_src46_src.pi and ../../acisf00955/products/spectra/fullrun_ccd3_acisf00955_pi14-548_pass1_cl_src46_bgd.pi exist, delete to re-create
[Fri Sep 23 19:29:41 2011] Not generating rmf since there are only 20 counts
[Fri Sep 23 19:29:44 2011] ../../acisf00955/products/lightcurves/fullrun_ccd3_acisf00955_pi14-548_pass1_cl_src46_src.lc and ../../acisf00955/products/lightcurves/fullrun_ccd3_acisf00955_pi14-548_pass1_cl_src46_bgd.lc exist, delete to re-create
[Fri Sep 23 19:30:48 2011] 208.672
[Fri Sep 23 19:31:01 2011] Updating aperture counts using extracted products
[Fri Sep 23 19:31:01 2011] Error reading totcts from fullrun_ccd3_acisf00955_pi14-548_pass1_cl_src46_src.pi.gz
[Fri Sep 23 19:31:01 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 23 19:31:01 2011] Using photon index=1.80, rate=0.000652, arf fullrun_ccd3_acisf00955_pi14-548_pass1_cl_src46.arf
[Fri Sep 23 19:31:01 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Sep 23 19:31:01 2011] Updating source flux to 6.3e-15
[Fri Sep 23 19:31:15 2011] Source 46 has fewer than 100.000000 counts, skipping spectral fitting