[Fri Sep 23 19:21:16 2011] Detection parameters:
  Position = (1007.2, 873.9) = 0 24 8.79 -72 5 7.6
  Extent = 0.5" x 0.5", rotation angle = 5 degrees
  Source counts = 28.5 +/- 5.8
  Background counts = 5.5
  Rate = 0.0009 +/- 0.0002

[Fri Sep 23 19:21:23 2011] Off-axis axis estimate = 1.34'
[Fri Sep 23 19:22:47 2011] Using EEF radius (= 0.39 ")to estimate initial spatial extent for simple fitting
[Fri Sep 23 19:22:47 2011] Initial guess for spatial extent in simple fitting = 0.39"
[Fri Sep 23 19:22:47 2011] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.910
[Fri Sep 23 19:22:47 2011] Giving source the simple spatial ID 23 for pass 0, mean size = 0.39"
[Fri Sep 23 19:22:48 2011] fullrun_ccd3_acisf00955_pi14-548_cl_pass0_src23.ximg exists
[Fri Sep 23 19:22:48 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf00955_pi14-548_cl_pass0_src23.csv
[Fri Sep 23 19:22:48 2011] fullrun_ccd3_acisf00955_pi14-548_cl_pass0_src23_1.ximg exists
[Fri Sep 23 19:22:48 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf00955_pi14-548_cl_pass0_src23.csv
[Fri Sep 23 19:22:48 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf00955_pi14-548_cl_pass0_src23_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf00955_pi14-548_cl_pass0_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 23 19:22:52 2011] fullrun_ccd3_acisf00955_pi14-548_cl_pass0_tfrozen_src23.ximg exists
[Fri Sep 23 19:22:52 2011] fullrun_ccd3_acisf00955_pi14-548_cl_pass0_tfrozen_src23_1.ximg exists
[Fri Sep 23 19:22:52 2011] Fit fullrun_ccd3_acisf00955_pi14-548_cl_pass0_tfrozen_src23 appears to have run properly
[Fri Sep 23 19:23:09 2011] Spatial fit model total counts = 38.768300, observed total counts = 39.000000
[Fri Sep 23 19:23:09 2011] Offset between fit and detection position for source 33 = 0.730121 pixels
[Fri Sep 23 19:23:09 2011] 39.306500 total counts/ 10.969900 bgd. counts: snr = 8.555520
Spatial fit parameters:
  Offset between fit and detection position for source 33 = 0.730121 pixels
  Position = (1007.7, 874.5) = 0 24 8.79 -72 5 7.6
  Extent = 0.4 (0.3-0.6)", rotation angle = 0
  Source counts = 28.3 +/- 6.3
  Background counts = 11.0
  Rate = 0.0009 +/- 0.0002
[Fri Sep 23 19:23:09 2011] Vigneting correction estimate = 1.000000
[Fri Sep 23 19:23:09 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 23 19:23:09 2011] Assessing source extent using major axis lower bound
[Fri Sep 23 19:23:09 2011] Source does appear to be extended
[Fri Sep 23 19:23:09 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 23 19:23:37 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Sep 23 19:23:37 2011] Initial guess for spatial extent in simple fitting = 0.42"
[Fri Sep 23 19:23:37 2011] source mask rpix=0.9, npix_max = 7, mask sum = 9, frac = 1.218
[Fri Sep 23 19:23:37 2011] Giving source the simple spatial ID 23 for pass 1, mean size = 0.42"
[Fri Sep 23 19:23:38 2011] fullrun_ccd3_acisf00955_pi14-548_cl_pass1_src23.ximg exists
[Fri Sep 23 19:23:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf00955_pi14-548_cl_pass1_src23.csv
[Fri Sep 23 19:23:38 2011] fullrun_ccd3_acisf00955_pi14-548_cl_pass1_src23_1.ximg exists
[Fri Sep 23 19:23:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf00955_pi14-548_cl_pass1_src23.csv
[Fri Sep 23 19:23:38 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf00955_pi14-548_cl_pass1_src23_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf00955_pi14-548_cl_pass1_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 23 19:23:39 2011] fullrun_ccd3_acisf00955_pi14-548_cl_pass1_tfrozen_src23.ximg exists
[Fri Sep 23 19:23:39 2011] fullrun_ccd3_acisf00955_pi14-548_cl_pass1_tfrozen_src23_1.ximg exists
[Fri Sep 23 19:23:39 2011] Fit fullrun_ccd3_acisf00955_pi14-548_cl_pass1_tfrozen_src23 appears to have run properly
[Fri Sep 23 19:23:59 2011] Spatial fit model total counts = 38.800500, observed total counts = 39.000000
[Fri Sep 23 19:23:59 2011] Offset between fit and detection position for source 33 = 0.031378 pixels
[Fri Sep 23 19:23:59 2011] 38.935300 total counts/ 10.864000 bgd. counts: snr = 8.516627
Spatial fit parameters:
  Offset between fit and detection position for source 33 = 0.031378 pixels
  Position = (1007.7, 874.5) = 0 24 8.79 -72 5 7.6
  Extent = 0.4 (0.3-0.6)", rotation angle = 0
  Source counts = 28.1 +/- 6.2
  Background counts = 10.9
  Rate = 0.0009 +/- 0.0002
[Fri Sep 23 19:23:59 2011] Vigneting correction estimate = 1.000000
[Fri Sep 23 19:23:59 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 23 19:23:59 2011] Assessing source extent using major axis lower bound
[Fri Sep 23 19:23:59 2011] Source does appear to be extended
[Fri Sep 23 19:23:59 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 23 19:27:55 2011] Not overwriting source region fullrun_ccd3_acisf00955_pi14-548_pass1_cl_src33_src.reg
[Fri Sep 23 19:27:55 2011] Extracting stamp from image fullrun_ccd3_acisf00955_pi14-548_cl_sm2.00.img.gz, (989, 856) - (1026, 893)
[Fri Sep 23 19:27:55 2011] Writing fullrun_ccd3_acisf00955_pi14-548_pass1_cl_src33.gif
[Fri Sep 23 19:29:23 2011] ../../acisf00955/products/events/fullrun_ccd3_acisf00955_pi14-548_pass1_cl_src33_src.evt and ../../acisf00955/products/events/fullrun_ccd3_acisf00955_pi14-548_pass1_cl_src33_bgd.evt exist, delete to re-create
[Fri Sep 23 19:29:23 2011] Size of ../../acisf00955/products/events/fullrun_ccd3_acisf00955_pi14-548_pass1_cl_src33_src.evt.gz[events] = 31 counts
[Fri Sep 23 19:29:23 2011] Mean chipx,y = (859.58, 881.58)
[Fri Sep 23 19:29:23 2011] Mean tdetx,y = (4250.42, 3920.58)
[Fri Sep 23 19:29:23 2011] chipx,y range = (843.00-876.00, 862.00-895.00)
[Fri Sep 23 19:29:23 2011] Size of ../../acisf00955/products/events/fullrun_ccd3_acisf00955_pi14-548_pass1_cl_src33_bgd.evt.gz[events] = 7 counts
[Fri Sep 23 19:29:23 2011] ../../acisf00955/products/images/fullrun_ccd3_acisf00955_pi14-548_pass1_cl_src33_src.img and ../../acisf00955/products/images/fullrun_ccd3_acisf00955_pi14-548_pass1_cl_src33_bgd.img exist, delete to re-create
[Fri Sep 23 19:29:23 2011] ../../acisf00955/products/spectra/fullrun_ccd3_acisf00955_pi14-548_pass1_cl_src33_src.pi and ../../acisf00955/products/spectra/fullrun_ccd3_acisf00955_pi14-548_pass1_cl_src33_bgd.pi exist, delete to re-create
[Fri Sep 23 19:29:23 2011] Not generating rmf since there are only 28 counts
[Fri Sep 23 19:29:27 2011] ../../acisf00955/products/lightcurves/fullrun_ccd3_acisf00955_pi14-548_pass1_cl_src33_src.lc and ../../acisf00955/products/lightcurves/fullrun_ccd3_acisf00955_pi14-548_pass1_cl_src33_bgd.lc exist, delete to re-create
[Fri Sep 23 19:30:48 2011] 207.975
[Fri Sep 23 19:31:00 2011] Updating aperture counts using extracted products
[Fri Sep 23 19:31:00 2011] Error reading totcts from fullrun_ccd3_acisf00955_pi14-548_pass1_cl_src33_src.pi.gz
[Fri Sep 23 19:31:01 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 23 19:31:01 2011] Using photon index=1.80, rate=0.000886, arf fullrun_ccd3_acisf00955_pi14-548_pass1_cl_src33.arf
[Fri Sep 23 19:31:01 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Sep 23 19:31:01 2011] Updating source flux to 8.6e-15
[Fri Sep 23 19:31:15 2011] Source 33 has fewer than 100.000000 counts, skipping spectral fitting