[Fri Sep 23 19:21:10 2011] Detection parameters:
  Position = (1010.1, 888.6) = 0 24 8.48 -72 5 0.4
  Extent = 0.5" x 0.5", rotation angle = 79 degrees
  Source counts = 41.4 +/- 6.9
  Background counts = 5.6
  Rate = 0.001 +/- 0.0002

[Fri Sep 23 19:21:23 2011] Off-axis axis estimate = 1.25'
[Fri Sep 23 19:22:47 2011] Using EEF radius (= 0.38 ")to estimate initial spatial extent for simple fitting
[Fri Sep 23 19:22:47 2011] Initial guess for spatial extent in simple fitting = 0.38"
[Fri Sep 23 19:22:47 2011] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.917
[Fri Sep 23 19:22:47 2011] Giving source the simple spatial ID 17 for pass 0, mean size = 0.38"
[Fri Sep 23 19:22:48 2011] fullrun_ccd3_acisf00955_pi14-548_cl_pass0_src17.ximg exists
[Fri Sep 23 19:22:48 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf00955_pi14-548_cl_pass0_src17.csv
[Fri Sep 23 19:22:48 2011] fullrun_ccd3_acisf00955_pi14-548_cl_pass0_src17_1.ximg exists
[Fri Sep 23 19:22:48 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf00955_pi14-548_cl_pass0_src17.csv
[Fri Sep 23 19:22:48 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf00955_pi14-548_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf00955_pi14-548_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 23 19:22:50 2011] fullrun_ccd3_acisf00955_pi14-548_cl_pass0_tfrozen_src17.ximg exists
[Fri Sep 23 19:22:51 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf00955_pi14-548_cl_pass0_tfrozen_src17.csv
[Fri Sep 23 19:22:51 2011] fullrun_ccd3_acisf00955_pi14-548_cl_pass0_tfrozen_src17_1.ximg exists
[Fri Sep 23 19:22:51 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf00955_pi14-548_cl_pass0_tfrozen_src17.csv
[Fri Sep 23 19:22:51 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf00955_pi14-548_cl_pass0_tfrozen_src17_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf00955_pi14-548_cl_pass0_tfrozen_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 23 19:23:09 2011] Spatial fit model total counts = 46.683100, observed total counts = 52.000000
[Fri Sep 23 19:23:09 2011] Offset between fit and detection position for source 10 = 0.784075 pixels
[Fri Sep 23 19:23:09 2011] 48.410555 total counts/ 0.303055 bgd. counts: snr = 87.388053
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.784075 pixels
  Position = (1010.6, 889.2) = 0 24 8.48 -72 5 0.3
  Extent = 0.4 (0.3-0.4)", rotation angle = 0
  Source counts = 48.1 +/- 7.0
  Background counts = 0.3
  Rate = 0.002 +/- 0.0002
[Fri Sep 23 19:23:09 2011] Vigneting correction estimate = 1.000000
[Fri Sep 23 19:23:09 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 23 19:23:09 2011] Assessing source extent using major axis lower bound
[Fri Sep 23 19:23:09 2011] Source does appear to be extended
[Fri Sep 23 19:23:09 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 23 19:23:37 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Sep 23 19:23:37 2011] Initial guess for spatial extent in simple fitting = 0.37"
[Fri Sep 23 19:23:37 2011] source mask rpix=0.7, npix_max = 6, mask sum = 6, frac = 0.965
[Fri Sep 23 19:23:37 2011] Giving source the simple spatial ID 17 for pass 1, mean size = 0.37"
[Fri Sep 23 19:23:38 2011] fullrun_ccd3_acisf00955_pi14-548_cl_pass1_src17.ximg exists
[Fri Sep 23 19:23:38 2011] fullrun_ccd3_acisf00955_pi14-548_cl_pass1_src17_1.ximg exists
[Fri Sep 23 19:23:38 2011] Fit fullrun_ccd3_acisf00955_pi14-548_cl_pass1_src17 appears to have run properly
[Fri Sep 23 19:23:39 2011] fullrun_ccd3_acisf00955_pi14-548_cl_pass1_tfrozen_src17.ximg exists
[Fri Sep 23 19:23:39 2011] fullrun_ccd3_acisf00955_pi14-548_cl_pass1_tfrozen_src17_1.ximg exists
[Fri Sep 23 19:23:39 2011] Fit fullrun_ccd3_acisf00955_pi14-548_cl_pass1_tfrozen_src17 appears to have run properly
[Fri Sep 23 19:23:59 2011] Spatial fit model total counts = 48.307100, observed total counts = 51.000000
[Fri Sep 23 19:23:59 2011] Offset between fit and detection position for source 10 = 0.017233 pixels
[Fri Sep 23 19:23:59 2011] 49.449450 total counts/ 1.856750 bgd. counts: snr = 34.927188
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.017233 pixels
  Position = (1010.6, 889.2) = 0 24 8.48 -72 5 0.3
  Extent = 0.4 (0.3-0.4)", rotation angle = 0
  Source counts = 47.6 +/- 7.0
  Background counts = 1.9
  Rate = 0.002 +/- 0.0002
[Fri Sep 23 19:23:59 2011] Vigneting correction estimate = 1.000000
[Fri Sep 23 19:23:59 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 23 19:23:59 2011] Assessing source extent using major axis lower bound
[Fri Sep 23 19:23:59 2011] Source does appear to be extended
[Fri Sep 23 19:23:59 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 23 19:27:55 2011] Not overwriting source region fullrun_ccd3_acisf00955_pi14-548_pass1_cl_src10_src.reg
[Fri Sep 23 19:27:55 2011] Extracting stamp from image fullrun_ccd3_acisf00955_pi14-548_cl_sm2.00.img.gz, (994, 873) - (1027, 906)
[Fri Sep 23 19:27:55 2011] Writing fullrun_ccd3_acisf00955_pi14-548_pass1_cl_src10.gif
[Fri Sep 23 19:29:01 2011] ../../acisf00955/products/events/fullrun_ccd3_acisf00955_pi14-548_pass1_cl_src10_src.evt and ../../acisf00955/products/events/fullrun_ccd3_acisf00955_pi14-548_pass1_cl_src10_bgd.evt exist, delete to re-create
[Fri Sep 23 19:29:01 2011] Size of ../../acisf00955/products/events/fullrun_ccd3_acisf00955_pi14-548_pass1_cl_src10_src.evt.gz[events] = 47 counts
[Fri Sep 23 19:29:01 2011] Mean chipx,y = (874.85, 877.79)
[Fri Sep 23 19:29:01 2011] Mean tdetx,y = (4254.21, 3935.85)
[Fri Sep 23 19:29:01 2011] chipx,y range = (857.00-891.00, 862.00-896.00)
[Fri Sep 23 19:29:01 2011] Size of ../../acisf00955/products/events/fullrun_ccd3_acisf00955_pi14-548_pass1_cl_src10_bgd.evt.gz[events] = 10 counts
[Fri Sep 23 19:29:01 2011] ../../acisf00955/products/images/fullrun_ccd3_acisf00955_pi14-548_pass1_cl_src10_src.img and ../../acisf00955/products/images/fullrun_ccd3_acisf00955_pi14-548_pass1_cl_src10_bgd.img exist, delete to re-create
[Fri Sep 23 19:29:01 2011] ../../acisf00955/products/spectra/fullrun_ccd3_acisf00955_pi14-548_pass1_cl_src10_src.pi and ../../acisf00955/products/spectra/fullrun_ccd3_acisf00955_pi14-548_pass1_cl_src10_bgd.pi exist, delete to re-create
[Fri Sep 23 19:29:01 2011] Not generating rmf since there are only 47 counts
[Fri Sep 23 19:29:06 2011] ../../acisf00955/products/lightcurves/fullrun_ccd3_acisf00955_pi14-548_pass1_cl_src10_src.lc and ../../acisf00955/products/lightcurves/fullrun_ccd3_acisf00955_pi14-548_pass1_cl_src10_bgd.lc exist, delete to re-create
[Fri Sep 23 19:30:48 2011] 208.239
[Fri Sep 23 19:31:00 2011] Updating aperture counts using extracted products
[Fri Sep 23 19:31:00 2011] Error reading totcts from fullrun_ccd3_acisf00955_pi14-548_pass1_cl_src10_src.pi.gz
[Fri Sep 23 19:31:01 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 23 19:31:01 2011] Using photon index=1.80, rate=0.0015, arf fullrun_ccd3_acisf00955_pi14-548_pass1_cl_src10.arf
[Fri Sep 23 19:31:01 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Sep 23 19:31:01 2011] Updating source flux to 1.5e-14
[Fri Sep 23 19:31:15 2011] Source 10 has fewer than 100.000000 counts, skipping spectral fitting