[Tue Apr 10 22:24:34 2012] Detection parameters:
  Position = (370.5, 1045.5) = 12 41 42.56 41 22 59.6
  Extent = 0.5" x 0.5", rotation angle = 90 degrees
  Source counts = 168.8 +/- 13.6
  Background counts = 16.2
  Rate = 0.003 +/- 0.0002

[Tue Apr 10 22:24:35 2012] Off-axis axis estimate = 6.72'
[Tue Apr 10 22:25:30 2012] Using EEF radius (= 2.02 ")to estimate initial spatial extent for simple fitting
[Tue Apr 10 22:25:30 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Apr 10 22:25:30 2012] Initial guess for spatial extent in simple fitting = 2.02"
[Tue Apr 10 22:25:30 2012] source mask rpix=4.1, npix_max = 84, mask sum = 47, frac = 0.555
[Tue Apr 10 22:25:30 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 2.02"
[Tue Apr 10 22:25:31 2012] fullrun_ccd6_acisf09549_pi14-548_cl_pass0_src1.ximg exists
[Tue Apr 10 22:25:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf09549_pi14-548_cl_pass0_src1.csv
[Tue Apr 10 22:25:31 2012] fullrun_ccd6_acisf09549_pi14-548_cl_pass0_src1_1.ximg exists
[Tue Apr 10 22:25:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf09549_pi14-548_cl_pass0_src1.csv
[Tue Apr 10 22:25:31 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf09549_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf09549_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 22:25:31 2012] fullrun_ccd6_acisf09549_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Tue Apr 10 22:25:31 2012] fullrun_ccd6_acisf09549_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Apr 10 22:25:31 2012] Fit fullrun_ccd6_acisf09549_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Apr 10 22:25:38 2012] Spatial fit model total counts = 481.342000, observed total counts = 484.000000
[Tue Apr 10 22:25:38 2012] Offset between fit and detection position for source 3 = 2.053165 pixels
[Tue Apr 10 22:25:38 2012] 479.637000 total counts/ 14.951000 bgd. counts: snr = 120.177860
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 2.053165 pixels
  Position = (371.7, 1047.2) = 12 41 42.53 41 23 0.2
  Extent = 2.5 (2.3-2.7)", rotation angle = 0
  Source counts = 464.7 +/- 21.9
  Background counts = 15.0
  Rate = 0.008 +/- 0.0004
[Tue Apr 10 22:25:38 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 22:25:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 22:25:38 2012] Assessing source extent using major axis lower bound
[Tue Apr 10 22:25:38 2012] Source does appear to be extended
[Tue Apr 10 22:25:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Apr 10 22:26:00 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Apr 10 22:26:00 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Apr 10 22:26:00 2012] Initial guess for spatial extent in simple fitting = 2.53"
[Tue Apr 10 22:26:00 2012] source mask rpix=5.1, npix_max = 127, mask sum = 82, frac = 0.643
[Tue Apr 10 22:26:00 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 2.53"
[Tue Apr 10 22:26:00 2012] fullrun_ccd6_acisf09549_pi14-548_cl_pass1_src1.ximg exists
[Tue Apr 10 22:26:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf09549_pi14-548_cl_pass1_src1.csv
[Tue Apr 10 22:26:00 2012] fullrun_ccd6_acisf09549_pi14-548_cl_pass1_src1_1.ximg exists
[Tue Apr 10 22:26:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf09549_pi14-548_cl_pass1_src1.csv
[Tue Apr 10 22:26:00 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf09549_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf09549_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 22:26:00 2012] fullrun_ccd6_acisf09549_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Tue Apr 10 22:26:00 2012] fullrun_ccd6_acisf09549_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Apr 10 22:26:00 2012] Fit fullrun_ccd6_acisf09549_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Apr 10 22:26:08 2012] Spatial fit model total counts = 499.001000, observed total counts = 499.000000
[Tue Apr 10 22:26:08 2012] Offset between fit and detection position for source 3 = 0.162310 pixels
[Tue Apr 10 22:26:08 2012] 498.145000 total counts/ 41.735000 bgd. counts: snr = 70.648825
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.162310 pixels
  Position = (371.5, 1047.1) = 12 41 42.54 41 23 0.1
  Extent = 2.5 (2.3-2.6)", rotation angle = 0
  Source counts = 456.4 +/- 22.3
  Background counts = 41.7
  Rate = 0.008 +/- 0.0004
[Tue Apr 10 22:26:08 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 22:26:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 22:26:08 2012] Assessing source extent using major axis lower bound
[Tue Apr 10 22:26:08 2012] Source does appear to be extended
[Tue Apr 10 22:26:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Apr 10 22:26:48 2012] Not overwriting source region fullrun_ccd6_acisf09549_pi14-548_pass1_cl_src3_src.reg
[Tue Apr 10 22:26:48 2012] Extracting stamp from image fullrun_ccd6_acisf09549_pi14-548_cl_sm2.00.img.gz, (259, 935) - (484, 1160)
[Tue Apr 10 22:26:48 2012] Writing fullrun_ccd6_acisf09549_pi14-548_pass1_cl_src3.gif
[Tue Apr 10 22:26:50 2012] ../../acisf09549/products/events/fullrun_ccd6_acisf09549_pi14-548_pass1_cl_src3_src.evt and ../../acisf09549/products/events/fullrun_ccd6_acisf09549_pi14-548_pass1_cl_src3_bgd.evt exist, delete to re-create
[Tue Apr 10 22:26:50 2012] Size of ../../acisf09549/products/events/fullrun_ccd6_acisf09549_pi14-548_pass1_cl_src3_src.evt.gz[events] = 487 counts
[Tue Apr 10 22:26:50 2012] Mean chipx,y = (580.36, 1001.75)
[Tue Apr 10 22:26:50 2012] Mean tdetx,y = (3455.36, 2703.75)
[Tue Apr 10 22:26:50 2012] chipx,y range = (553.00-611.00, 975.00-1023.00)
[Tue Apr 10 22:26:50 2012] Size of ../../acisf09549/products/events/fullrun_ccd6_acisf09549_pi14-548_pass1_cl_src3_bgd.evt.gz[events] = 187 counts
[Tue Apr 10 22:26:50 2012] ../../acisf09549/products/images/fullrun_ccd6_acisf09549_pi14-548_pass1_cl_src3_src.img and ../../acisf09549/products/images/fullrun_ccd6_acisf09549_pi14-548_pass1_cl_src3_bgd.img exist, delete to re-create
[Tue Apr 10 22:26:50 2012] ../../acisf09549/products/spectra/fullrun_ccd6_acisf09549_pi14-548_pass1_cl_src3_src.pi and ../../acisf09549/products/spectra/fullrun_ccd6_acisf09549_pi14-548_pass1_cl_src3_bgd.pi exist, delete to re-create
[Tue Apr 10 22:26:53 2012] ../../acisf09549/products/lightcurves/fullrun_ccd6_acisf09549_pi14-548_pass1_cl_src3_src.lc and ../../acisf09549/products/lightcurves/fullrun_ccd6_acisf09549_pi14-548_pass1_cl_src3_bgd.lc exist, delete to re-create
[Tue Apr 10 22:27:38 2012] Keeping rmf generated by specextract
[Tue Apr 10 22:27:38 2012] 163.937
[Tue Apr 10 22:29:15 2012] Updating aperture counts using extracted products
[Tue Apr 10 22:29:15 2012] Error reading totcts from fullrun_ccd6_acisf09549_pi14-548_pass1_cl_src3_src.pi.gz
[Tue Apr 10 22:29:15 2012] Calculating source flux in energy range 0.30-8.00
[Tue Apr 10 22:29:15 2012] Using photon index=1.80, rate=0.00832, arf fullrun_ccd6_acisf09549_pi14-548_pass1_cl_src3.arf
[Tue Apr 10 22:29:15 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Apr 10 22:29:15 2012] Updating source flux to 1.2e-13
[Tue Apr 10 22:29:27 2012] Reading fit data from acisf09549/analysis//spectral/fullrun_ccd6_acisf09549_pi14-548_pass1_cl_src3_pl.csv
[Tue Apr 10 22:29:27 2012] Spectral fit parameter nH value = 5.62256e+12
[Tue Apr 10 22:29:27 2012] Spectral fit parameter PhoIndex value = 1.61103
[Tue Apr 10 22:29:27 2012] Failed to get F(0.3-8.0) from acisf09549/analysis//spectral/fullrun_ccd6_acisf09549_pi14-548_pass1_cl_src3_pl.csv, possibly due to different flux energy range selected
[Tue Apr 10 22:29:27 2012] Calculating source flux in energy range 0.30-8.00
[Tue Apr 10 22:29:27 2012] Using Nh = 5.6e+12, photon index=1.61, rate=0.00832, arf fullrun_ccd6_acisf09549_pi14-548_pass1_cl_src3.arf
[Tue Apr 10 22:29:27 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Apr 10 22:29:27 2012] Updating source flux to 1.3e-13