[Wed Apr 11 02:02:04 2012] Detection parameters:
  Position = (862.5, 735.6) = 12 39 47.22 -11 38 14.1
  Extent = 0.8" x 0.6", rotation angle = 61 degrees
  Source counts = 45.1 +/- 7.0
  Background counts = 3.9
  Rate = 0.0005 +/- 8e-05

[Wed Apr 11 02:02:27 2012] Off-axis axis estimate = 4.83'
[Wed Apr 11 02:04:07 2012] Using EEF radius (= 1.11 ")to estimate initial spatial extent for simple fitting
[Wed Apr 11 02:04:07 2012] Initial guess for spatial extent in simple fitting = 1.11"
[Wed Apr 11 02:04:07 2012] source mask rpix=2.3, npix_max = 30, mask sum = 25, frac = 0.818
[Wed Apr 11 02:04:07 2012] Giving source the simple spatial ID 71 for pass 0, mean size = 1.11"
[Wed Apr 11 02:04:11 2012] fullrun_ccd3_acisf09533_pi14-548_cl_pass0_src71.ximg exists
[Wed Apr 11 02:04:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf09533_pi14-548_cl_pass0_src71.csv
[Wed Apr 11 02:04:12 2012] fullrun_ccd3_acisf09533_pi14-548_cl_pass0_src71_1.ximg exists
[Wed Apr 11 02:04:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf09533_pi14-548_cl_pass0_src71.csv
[Wed Apr 11 02:04:12 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf09533_pi14-548_cl_pass0_src71_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf09533_pi14-548_cl_pass0_src71.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Apr 11 02:04:22 2012] fullrun_ccd3_acisf09533_pi14-548_cl_pass0_tfrozen_src71.ximg exists
[Wed Apr 11 02:04:22 2012] fullrun_ccd3_acisf09533_pi14-548_cl_pass0_tfrozen_src71_1.ximg exists
[Wed Apr 11 02:04:22 2012] Fit fullrun_ccd3_acisf09533_pi14-548_cl_pass0_tfrozen_src71 appears to have run properly
[Wed Apr 11 02:05:02 2012] Spatial fit model total counts = 51.008500, observed total counts = 52.000000
[Wed Apr 11 02:05:02 2012] Offset between fit and detection position for source 64 = 0.767981 pixels
[Wed Apr 11 02:05:02 2012] 50.889370 total counts/ 5.706170 bgd. counts: snr = 18.914925
Spatial fit parameters:
  Offset between fit and detection position for source 64 = 0.767981 pixels
  Position = (863.1, 736.1) = 12 39 47.21 -11 38 14.2
  Extent = 0.8 (0.7-1.0)", rotation angle = 0
  Source counts = 45.2 +/- 7.1
  Background counts = 5.7
  Rate = 0.0005 +/- 8e-05
[Wed Apr 11 02:05:03 2012] Vigneting correction estimate = 1.000000
[Wed Apr 11 02:05:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Apr 11 02:05:03 2012] Assessing source extent using major axis lower bound
[Wed Apr 11 02:05:03 2012] Source does appear to be extended
[Wed Apr 11 02:05:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Apr 11 02:05:47 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Apr 11 02:05:47 2012] Initial guess for spatial extent in simple fitting = 0.80"
[Wed Apr 11 02:05:47 2012] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.878
[Wed Apr 11 02:05:47 2012] Giving source the simple spatial ID 71 for pass 1, mean size = 0.80"
[Wed Apr 11 02:05:51 2012] fullrun_ccd3_acisf09533_pi14-548_cl_pass1_src71.ximg exists
[Wed Apr 11 02:05:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf09533_pi14-548_cl_pass1_src71.csv
[Wed Apr 11 02:05:51 2012] fullrun_ccd3_acisf09533_pi14-548_cl_pass1_src71_1.ximg exists
[Wed Apr 11 02:05:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf09533_pi14-548_cl_pass1_src71.csv
[Wed Apr 11 02:05:51 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf09533_pi14-548_cl_pass1_src71_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf09533_pi14-548_cl_pass1_src71.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Apr 11 02:06:00 2012] fullrun_ccd3_acisf09533_pi14-548_cl_pass1_tfrozen_src71.ximg exists
[Wed Apr 11 02:06:00 2012] fullrun_ccd3_acisf09533_pi14-548_cl_pass1_tfrozen_src71_1.ximg exists
[Wed Apr 11 02:06:00 2012] Fit fullrun_ccd3_acisf09533_pi14-548_cl_pass1_tfrozen_src71 appears to have run properly
[Wed Apr 11 02:06:36 2012] Spatial fit model total counts = 53.782500, observed total counts = 54.000000
[Wed Apr 11 02:06:36 2012] Offset between fit and detection position for source 64 = 0.075134 pixels
[Wed Apr 11 02:06:36 2012] 53.877080 total counts/ 9.937580 bgd. counts: snr = 13.938460
Spatial fit parameters:
  Offset between fit and detection position for source 64 = 0.075134 pixels
  Position = (863.1, 736.0) = 12 39 47.22 -11 38 14.2
  Extent = 0.8 (0.6-1.0)", rotation angle = 0
  Source counts = 43.9 +/- 7.3
  Background counts = 9.9
  Rate = 0.0005 +/- 8e-05
[Wed Apr 11 02:06:36 2012] Vigneting correction estimate = 1.000000
[Wed Apr 11 02:06:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Apr 11 02:06:36 2012] Assessing source extent using major axis lower bound
[Wed Apr 11 02:06:36 2012] Source does appear to be extended
[Wed Apr 11 02:06:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Apr 11 02:11:35 2012] Not overwriting source region fullrun_ccd3_acisf09533_pi14-548_pass1_cl_src64_src.reg
[Wed Apr 11 02:11:35 2012] Extracting stamp from image fullrun_ccd3_acisf09533_pi14-548_cl_sm2.00.img.gz, (828, 700) - (899, 772)
[Wed Apr 11 02:11:35 2012] Writing fullrun_ccd3_acisf09533_pi14-548_pass1_cl_src64.gif
[Wed Apr 11 02:15:11 2012] ../../acisf09533/products/events/fullrun_ccd3_acisf09533_pi14-548_pass1_cl_src64_src.evt and ../../acisf09533/products/events/fullrun_ccd3_acisf09533_pi14-548_pass1_cl_src64_bgd.evt exist, delete to re-create
[Wed Apr 11 02:15:11 2012] Size of ../../acisf09533/products/events/fullrun_ccd3_acisf09533_pi14-548_pass1_cl_src64_src.evt.gz[events] = 47 counts
[Wed Apr 11 02:15:11 2012] Mean chipx,y = (279.70, 526.94)
[Wed Apr 11 02:15:11 2012] Mean tdetx,y = (4605.06, 3340.70)
[Wed Apr 11 02:15:11 2012] chipx,y range = (264.00-299.00, 511.00-546.00)
[Wed Apr 11 02:15:11 2012] Size of ../../acisf09533/products/events/fullrun_ccd3_acisf09533_pi14-548_pass1_cl_src64_bgd.evt.gz[events] = 51 counts
[Wed Apr 11 02:15:11 2012] ../../acisf09533/products/images/fullrun_ccd3_acisf09533_pi14-548_pass1_cl_src64_src.img and ../../acisf09533/products/images/fullrun_ccd3_acisf09533_pi14-548_pass1_cl_src64_bgd.img exist, delete to re-create
[Wed Apr 11 02:15:11 2012] ../../acisf09533/products/spectra/fullrun_ccd3_acisf09533_pi14-548_pass1_cl_src64_src.pi and ../../acisf09533/products/spectra/fullrun_ccd3_acisf09533_pi14-548_pass1_cl_src64_bgd.pi exist, delete to re-create
[Wed Apr 11 02:15:11 2012] Not generating rmf since there are only 43 counts
[Wed Apr 11 02:15:14 2012] ../../acisf09533/products/lightcurves/fullrun_ccd3_acisf09533_pi14-548_pass1_cl_src64_src.lc and ../../acisf09533/products/lightcurves/fullrun_ccd3_acisf09533_pi14-548_pass1_cl_src64_bgd.lc exist, delete to re-create
[Wed Apr 11 02:20:01 2012] 185.791
[Wed Apr 11 02:20:38 2012] Updating aperture counts using extracted products
[Wed Apr 11 02:20:38 2012] Error reading totcts from fullrun_ccd3_acisf09533_pi14-548_pass1_cl_src64_src.pi.gz
[Wed Apr 11 02:20:40 2012] Calculating source flux in energy range 0.30-8.00
[Wed Apr 11 02:20:40 2012] Using photon index=1.80, rate=0.000494, arf fullrun_ccd3_acisf09533_pi14-548_pass1_cl_src64.arf
[Wed Apr 11 02:20:40 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Apr 11 02:20:40 2012] Updating source flux to 6.3e-15
[Wed Apr 11 02:21:19 2012] Source 64 has fewer than 100.000000 counts, skipping spectral fitting