[Wed Apr 11 02:02:02 2012] Detection parameters:
  Position = (763.6, 614.6) = 12 39 50.53 -11 39 13.7
  Extent = 0.9" x 0.8", rotation angle = 89 degrees
  Source counts = 112.0 +/- 11.0
  Background counts = 8.0
  Rate = 0.001 +/- 0.0001

[Wed Apr 11 02:02:27 2012] Off-axis axis estimate = 4.97'
[Wed Apr 11 02:04:07 2012] Using EEF radius (= 1.17 ")to estimate initial spatial extent for simple fitting
[Wed Apr 11 02:04:07 2012] Initial guess for spatial extent in simple fitting = 1.17"
[Wed Apr 11 02:04:07 2012] source mask rpix=2.4, npix_max = 33, mask sum = 25, frac = 0.757
[Wed Apr 11 02:04:07 2012] Giving source the simple spatial ID 31 for pass 0, mean size = 1.17"
[Wed Apr 11 02:04:10 2012] fullrun_ccd3_acisf09533_pi14-548_cl_pass0_src31.ximg exists
[Wed Apr 11 02:04:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf09533_pi14-548_cl_pass0_src31.csv
[Wed Apr 11 02:04:10 2012] fullrun_ccd3_acisf09533_pi14-548_cl_pass0_src31_1.ximg exists
[Wed Apr 11 02:04:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf09533_pi14-548_cl_pass0_src31.csv
[Wed Apr 11 02:04:10 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf09533_pi14-548_cl_pass0_src31_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf09533_pi14-548_cl_pass0_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Apr 11 02:04:21 2012] fullrun_ccd3_acisf09533_pi14-548_cl_pass0_tfrozen_src31.ximg exists
[Wed Apr 11 02:04:21 2012] fullrun_ccd3_acisf09533_pi14-548_cl_pass0_tfrozen_src31_1.ximg exists
[Wed Apr 11 02:04:21 2012] Fit fullrun_ccd3_acisf09533_pi14-548_cl_pass0_tfrozen_src31 appears to have run properly
[Wed Apr 11 02:05:02 2012] Spatial fit model total counts = 124.998000, observed total counts = 125.000000
[Wed Apr 11 02:05:02 2012] Offset between fit and detection position for source 46 = 0.641088 pixels
[Wed Apr 11 02:05:02 2012] 125.535800 total counts/ 29.422000 bgd. counts: snr = 17.719426
Spatial fit parameters:
  Offset between fit and detection position for source 46 = 0.641088 pixels
  Position = (764.0, 615.1) = 12 39 50.53 -11 39 13.7
  Extent = 0.8 (0.7-1.0)", rotation angle = 0
  Source counts = 96.1 +/- 11.2
  Background counts = 29.4
  Rate = 0.001 +/- 0.0001
[Wed Apr 11 02:05:03 2012] Vigneting correction estimate = 1.000000
[Wed Apr 11 02:05:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Apr 11 02:05:03 2012] Assessing source extent using major axis lower bound
[Wed Apr 11 02:05:03 2012] Source does appear to be extended
[Wed Apr 11 02:05:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Apr 11 02:05:47 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Apr 11 02:05:47 2012] Initial guess for spatial extent in simple fitting = 0.80"
[Wed Apr 11 02:05:47 2012] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.888
[Wed Apr 11 02:05:47 2012] Giving source the simple spatial ID 31 for pass 1, mean size = 0.80"
[Wed Apr 11 02:05:50 2012] fullrun_ccd3_acisf09533_pi14-548_cl_pass1_src31.ximg exists
[Wed Apr 11 02:05:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf09533_pi14-548_cl_pass1_src31.csv
[Wed Apr 11 02:05:50 2012] fullrun_ccd3_acisf09533_pi14-548_cl_pass1_src31_1.ximg exists
[Wed Apr 11 02:05:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf09533_pi14-548_cl_pass1_src31.csv
[Wed Apr 11 02:05:50 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf09533_pi14-548_cl_pass1_src31_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf09533_pi14-548_cl_pass1_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Apr 11 02:05:53 2012] fullrun_ccd3_acisf09533_pi14-548_cl_pass1_tfrozen_src31.ximg exists
[Wed Apr 11 02:05:53 2012] fullrun_ccd3_acisf09533_pi14-548_cl_pass1_tfrozen_src31_1.ximg exists
[Wed Apr 11 02:05:53 2012] Fit fullrun_ccd3_acisf09533_pi14-548_cl_pass1_tfrozen_src31 appears to have run properly
[Wed Apr 11 02:06:36 2012] Spatial fit model total counts = 122.993000, observed total counts = 123.000000
[Wed Apr 11 02:06:36 2012] Offset between fit and detection position for source 46 = 0.052983 pixels
[Wed Apr 11 02:06:36 2012] 123.400700 total counts/ 23.505200 bgd. counts: snr = 20.604589
Spatial fit parameters:
  Offset between fit and detection position for source 46 = 0.052983 pixels
  Position = (764.0, 615.0) = 12 39 50.53 -11 39 13.7
  Extent = 0.8 (0.7-1.0)", rotation angle = 0
  Source counts = 99.9 +/- 11.1
  Background counts = 23.5
  Rate = 0.001 +/- 0.0001
[Wed Apr 11 02:06:36 2012] Vigneting correction estimate = 1.000000
[Wed Apr 11 02:06:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Apr 11 02:06:36 2012] Assessing source extent using major axis lower bound
[Wed Apr 11 02:06:36 2012] Source does appear to be extended
[Wed Apr 11 02:06:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Apr 11 02:11:34 2012] Not overwriting source region fullrun_ccd3_acisf09533_pi14-548_pass1_cl_src46_src.reg
[Wed Apr 11 02:11:34 2012] Extracting stamp from image fullrun_ccd3_acisf09533_pi14-548_cl_sm2.00.img.gz, (726, 577) - (802, 653)
[Wed Apr 11 02:11:34 2012] Writing fullrun_ccd3_acisf09533_pi14-548_pass1_cl_src46.gif
[Wed Apr 11 02:13:15 2012] ../../acisf09533/products/events/fullrun_ccd3_acisf09533_pi14-548_pass1_cl_src46_src.evt and ../../acisf09533/products/events/fullrun_ccd3_acisf09533_pi14-548_pass1_cl_src46_bgd.evt exist, delete to re-create
[Wed Apr 11 02:13:15 2012] Size of ../../acisf09533/products/events/fullrun_ccd3_acisf09533_pi14-548_pass1_cl_src46_src.evt.gz[events] = 116 counts
[Wed Apr 11 02:13:15 2012] Mean chipx,y = (414.37, 445.72)
[Wed Apr 11 02:13:15 2012] Mean tdetx,y = (4686.28, 3475.37)
[Wed Apr 11 02:13:15 2012] chipx,y range = (393.00-434.00, 425.00-467.00)
[Wed Apr 11 02:13:15 2012] Size of ../../acisf09533/products/events/fullrun_ccd3_acisf09533_pi14-548_pass1_cl_src46_bgd.evt.gz[events] = 46 counts
[Wed Apr 11 02:13:15 2012] ../../acisf09533/products/images/fullrun_ccd3_acisf09533_pi14-548_pass1_cl_src46_src.img and ../../acisf09533/products/images/fullrun_ccd3_acisf09533_pi14-548_pass1_cl_src46_bgd.img exist, delete to re-create
[Wed Apr 11 02:13:15 2012] ../../acisf09533/products/spectra/fullrun_ccd3_acisf09533_pi14-548_pass1_cl_src46_src.pi and ../../acisf09533/products/spectra/fullrun_ccd3_acisf09533_pi14-548_pass1_cl_src46_bgd.pi exist, delete to re-create
[Wed Apr 11 02:13:15 2012] Not generating rmf since there are only 99 counts
[Wed Apr 11 02:13:18 2012] ../../acisf09533/products/lightcurves/fullrun_ccd3_acisf09533_pi14-548_pass1_cl_src46_src.lc and ../../acisf09533/products/lightcurves/fullrun_ccd3_acisf09533_pi14-548_pass1_cl_src46_bgd.lc exist, delete to re-create
[Wed Apr 11 02:20:00 2012] 187.218
[Wed Apr 11 02:20:37 2012] Updating aperture counts using extracted products
[Wed Apr 11 02:20:37 2012] Error reading totcts from fullrun_ccd3_acisf09533_pi14-548_pass1_cl_src46_src.pi.gz
[Wed Apr 11 02:20:39 2012] Calculating source flux in energy range 0.30-8.00
[Wed Apr 11 02:20:39 2012] Using photon index=1.80, rate=0.00112, arf fullrun_ccd3_acisf09533_pi14-548_pass1_cl_src46.arf
[Wed Apr 11 02:20:39 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Apr 11 02:20:39 2012] Updating source flux to 1.4e-14
[Wed Apr 11 02:21:19 2012] Source 46 has fewer than 100.000000 counts, skipping spectral fitting