[Wed Apr 11 02:02:22 2012] Detection parameters:
  Position = (911.4, 576.0) = 12 39 45.58 -11 39 32.7
  Extent = 1.5" x 1.2", rotation angle = 57 degrees
  Source counts = 37.3 +/- 6.9
  Background counts = 10.7
  Rate = 0.0004 +/- 8e-05

[Wed Apr 11 02:02:27 2012] Off-axis axis estimate = 6.00'
[Wed Apr 11 02:04:07 2012] Using EEF radius (= 1.63 ")to estimate initial spatial extent for simple fitting
[Wed Apr 11 02:04:07 2012] Initial guess for spatial extent in simple fitting = 1.63"
[Wed Apr 11 02:04:07 2012] source mask rpix=3.3, npix_max = 58, mask sum = 56, frac = 0.961
[Wed Apr 11 02:04:07 2012] Giving source the simple spatial ID 85 for pass 0, mean size = 1.63"
[Wed Apr 11 02:04:12 2012] fullrun_ccd3_acisf09533_pi14-548_cl_pass0_src85.ximg exists
[Wed Apr 11 02:04:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf09533_pi14-548_cl_pass0_src85.csv
[Wed Apr 11 02:04:12 2012] fullrun_ccd3_acisf09533_pi14-548_cl_pass0_src85_1.ximg exists
[Wed Apr 11 02:04:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf09533_pi14-548_cl_pass0_src85.csv
[Wed Apr 11 02:04:12 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf09533_pi14-548_cl_pass0_src85_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf09533_pi14-548_cl_pass0_src85.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Apr 11 02:04:23 2012] fullrun_ccd3_acisf09533_pi14-548_cl_pass0_tfrozen_src85.ximg exists
[Wed Apr 11 02:04:23 2012] fullrun_ccd3_acisf09533_pi14-548_cl_pass0_tfrozen_src85_1.ximg exists
[Wed Apr 11 02:04:23 2012] Fit fullrun_ccd3_acisf09533_pi14-548_cl_pass0_tfrozen_src85 appears to have run properly
[Wed Apr 11 02:05:02 2012] Spatial fit model total counts = 49.991100, observed total counts = 50.000000
[Wed Apr 11 02:05:02 2012] Offset between fit and detection position for source 201 = 0.642538 pixels
[Wed Apr 11 02:05:02 2012] 49.896800 total counts/ 20.366700 bgd. counts: snr = 6.543417
Spatial fit parameters:
  Offset between fit and detection position for source 201 = 0.642538 pixels
  Position = (911.5, 576.6) = 12 39 45.59 -11 39 32.6
  Extent = 1.1 (0.8-1.6)", rotation angle = 0
  Source counts = 29.5 +/- 7.1
  Background counts = 20.4
  Rate = 0.0003 +/- 8e-05
[Wed Apr 11 02:05:03 2012] Vigneting correction estimate = 1.000000
[Wed Apr 11 02:05:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Apr 11 02:05:03 2012] Assessing source extent using major axis lower bound
[Wed Apr 11 02:05:03 2012] Source does appear to be extended
[Wed Apr 11 02:05:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Apr 11 02:05:47 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Apr 11 02:05:47 2012] Initial guess for spatial extent in simple fitting = 1.08"
[Wed Apr 11 02:05:47 2012] source mask rpix=2.2, npix_max = 28, mask sum = 25, frac = 0.867
[Wed Apr 11 02:05:47 2012] Giving source the simple spatial ID 85 for pass 1, mean size = 1.08"
[Wed Apr 11 02:05:51 2012] fullrun_ccd3_acisf09533_pi14-548_cl_pass1_src85.ximg exists
[Wed Apr 11 02:05:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf09533_pi14-548_cl_pass1_src85.csv
[Wed Apr 11 02:05:51 2012] fullrun_ccd3_acisf09533_pi14-548_cl_pass1_src85_1.ximg exists
[Wed Apr 11 02:05:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf09533_pi14-548_cl_pass1_src85.csv
[Wed Apr 11 02:05:51 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf09533_pi14-548_cl_pass1_src85_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf09533_pi14-548_cl_pass1_src85.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Apr 11 02:06:01 2012] fullrun_ccd3_acisf09533_pi14-548_cl_pass1_tfrozen_src85.ximg exists
[Wed Apr 11 02:06:01 2012] fullrun_ccd3_acisf09533_pi14-548_cl_pass1_tfrozen_src85_1.ximg exists
[Wed Apr 11 02:06:01 2012] Fit fullrun_ccd3_acisf09533_pi14-548_cl_pass1_tfrozen_src85 appears to have run properly
[Wed Apr 11 02:06:36 2012] Spatial fit model total counts = 42.996400, observed total counts = 43.000000
[Wed Apr 11 02:06:36 2012] Offset between fit and detection position for source 201 = 0.149669 pixels
[Wed Apr 11 02:06:36 2012] 43.194500 total counts/ 14.535000 bgd. counts: snr = 7.517286
Spatial fit parameters:
  Offset between fit and detection position for source 201 = 0.149669 pixels
  Position = (911.5, 576.5) = 12 39 45.59 -11 39 32.7
  Extent = 1.1 (0.8-1.7)", rotation angle = 0
  Source counts = 28.7 +/- 6.6
  Background counts = 14.5
  Rate = 0.0003 +/- 7e-05
[Wed Apr 11 02:06:36 2012] Vigneting correction estimate = 1.000000
[Wed Apr 11 02:06:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Apr 11 02:06:36 2012] Assessing source extent using major axis lower bound
[Wed Apr 11 02:06:36 2012] Source does appear to be extended
[Wed Apr 11 02:06:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Apr 11 02:11:35 2012] Not overwriting source region fullrun_ccd3_acisf09533_pi14-548_pass1_cl_src201_src.reg
[Wed Apr 11 02:11:35 2012] Extracting stamp from image fullrun_ccd3_acisf09533_pi14-548_cl_sm2.00.img.gz, (863, 528) - (960, 624)
[Wed Apr 11 02:11:35 2012] Writing fullrun_ccd3_acisf09533_pi14-548_pass1_cl_src201.gif
[Wed Apr 11 02:15:54 2012] ../../acisf09533/products/events/fullrun_ccd3_acisf09533_pi14-548_pass1_cl_src201_src.evt and ../../acisf09533/products/events/fullrun_ccd3_acisf09533_pi14-548_pass1_cl_src201_bgd.evt exist, delete to re-create
[Wed Apr 11 02:15:54 2012] Size of ../../acisf09533/products/events/fullrun_ccd3_acisf09533_pi14-548_pass1_cl_src201_src.evt.gz[events] = 42 counts
[Wed Apr 11 02:15:54 2012] Mean chipx,y = (286.33, 358.83)
[Wed Apr 11 02:15:54 2012] Mean tdetx,y = (4773.17, 3347.33)
[Wed Apr 11 02:15:54 2012] chipx,y range = (264.00-308.00, 340.00-383.00)
[Wed Apr 11 02:15:54 2012] Size of ../../acisf09533/products/events/fullrun_ccd3_acisf09533_pi14-548_pass1_cl_src201_bgd.evt.gz[events] = 77 counts
[Wed Apr 11 02:15:54 2012] ../../acisf09533/products/images/fullrun_ccd3_acisf09533_pi14-548_pass1_cl_src201_src.img and ../../acisf09533/products/images/fullrun_ccd3_acisf09533_pi14-548_pass1_cl_src201_bgd.img exist, delete to re-create
[Wed Apr 11 02:15:54 2012] ../../acisf09533/products/spectra/fullrun_ccd3_acisf09533_pi14-548_pass1_cl_src201_src.pi and ../../acisf09533/products/spectra/fullrun_ccd3_acisf09533_pi14-548_pass1_cl_src201_bgd.pi exist, delete to re-create
[Wed Apr 11 02:15:54 2012] Not generating rmf since there are only 28 counts
[Wed Apr 11 02:15:57 2012] ../../acisf09533/products/lightcurves/fullrun_ccd3_acisf09533_pi14-548_pass1_cl_src201_src.lc and ../../acisf09533/products/lightcurves/fullrun_ccd3_acisf09533_pi14-548_pass1_cl_src201_bgd.lc exist, delete to re-create
[Wed Apr 11 02:20:02 2012] 180.703
[Wed Apr 11 02:20:38 2012] Updating aperture counts using extracted products
[Wed Apr 11 02:20:38 2012] Error reading totcts from fullrun_ccd3_acisf09533_pi14-548_pass1_cl_src201_src.pi.gz
[Wed Apr 11 02:20:40 2012] Calculating source flux in energy range 0.30-8.00
[Wed Apr 11 02:20:40 2012] Using photon index=1.80, rate=0.000322, arf fullrun_ccd3_acisf09533_pi14-548_pass1_cl_src201.arf
[Wed Apr 11 02:20:40 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Apr 11 02:20:40 2012] Updating source flux to 4.2e-15
[Wed Apr 11 02:21:19 2012] Source 201 has fewer than 100.000000 counts, skipping spectral fitting