[Tue Apr 10 17:43:55 2012] Detection parameters:
  Position = (897.3, 1239.7) = 3 38 21.66 -35 22 33.0
  Extent = 0.6" x 0.5", rotation angle = 105 degrees
  Source counts = 127.7 +/- 11.9
  Background counts = 14.3
  Rate = 0.002 +/- 0.0002

[Tue Apr 10 17:44:02 2012] Off-axis axis estimate = 3.43'
[Tue Apr 10 17:45:37 2012] Using EEF radius (= 0.68 ")to estimate initial spatial extent for simple fitting
[Tue Apr 10 17:45:37 2012] Initial guess for spatial extent in simple fitting = 0.68"
[Tue Apr 10 17:45:37 2012] source mask rpix=1.4, npix_max = 14, mask sum = 16, frac = 1.139
[Tue Apr 10 17:45:37 2012] Giving source the simple spatial ID 18 for pass 0, mean size = 0.68"
[Tue Apr 10 17:45:42 2012] fullrun_ccd7_acisf09530_pi14-548_cl_pass0_src18.ximg exists
[Tue Apr 10 17:45:42 2012] Warning: model total counts is not > 0 in csv/fullrun_ccd7_acisf09530_pi14-548_cl_pass0_src18.csv
[Tue Apr 10 17:45:42 2012] fullrun_ccd7_acisf09530_pi14-548_cl_pass0_src18_1.ximg exists
[Tue Apr 10 17:45:42 2012] Warning: model total counts is not > 0 in csv/fullrun_ccd7_acisf09530_pi14-548_cl_pass0_src18.csv
[Tue Apr 10 17:45:42 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf09530_pi14-548_cl_pass0_src18_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf09530_pi14-548_cl_pass0_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 17:45:46 2012] fullrun_ccd7_acisf09530_pi14-548_cl_pass0_tfrozen_src18.ximg exists
[Tue Apr 10 17:45:46 2012] fullrun_ccd7_acisf09530_pi14-548_cl_pass0_tfrozen_src18_1.ximg exists
[Tue Apr 10 17:45:46 2012] Fit fullrun_ccd7_acisf09530_pi14-548_cl_pass0_tfrozen_src18 appears to have run properly
[Tue Apr 10 17:46:15 2012] Spatial fit model total counts = 148.139000, observed total counts = 149.000000
[Tue Apr 10 17:46:15 2012] Offset between fit and detection position for source 55 = 0.736322 pixels
[Tue Apr 10 17:46:15 2012] 147.074000 total counts/ 32.833000 bgd. counts: snr = 19.937317
Spatial fit parameters:
  Offset between fit and detection position for source 55 = 0.736322 pixels
  Position = (897.8, 1240.3) = 3 38 21.66 -35 22 33.0
  Extent = 0.8 (0.7-0.9)", rotation angle = 0
  Source counts = 114.2 +/- 12.1
  Background counts = 32.8
  Rate = 0.002 +/- 0.0002
[Tue Apr 10 17:46:16 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 17:46:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 17:46:16 2012] Assessing source extent using major axis lower bound
[Tue Apr 10 17:46:16 2012] Source does appear to be extended
[Tue Apr 10 17:46:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Apr 10 17:46:41 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Apr 10 17:46:41 2012] Initial guess for spatial extent in simple fitting = 0.77"
[Tue Apr 10 17:46:41 2012] source mask rpix=1.6, npix_max = 16, mask sum = 16, frac = 0.945
[Tue Apr 10 17:46:41 2012] Giving source the simple spatial ID 18 for pass 1, mean size = 0.77"
[Tue Apr 10 17:46:43 2012] fullrun_ccd7_acisf09530_pi14-548_cl_pass1_src18.ximg exists
[Tue Apr 10 17:46:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf09530_pi14-548_cl_pass1_src18.csv
[Tue Apr 10 17:46:43 2012] fullrun_ccd7_acisf09530_pi14-548_cl_pass1_src18_1.ximg exists
[Tue Apr 10 17:46:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf09530_pi14-548_cl_pass1_src18.csv
[Tue Apr 10 17:46:43 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf09530_pi14-548_cl_pass1_src18_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf09530_pi14-548_cl_pass1_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 17:46:44 2012] fullrun_ccd7_acisf09530_pi14-548_cl_pass1_tfrozen_src18.ximg exists
[Tue Apr 10 17:46:44 2012] fullrun_ccd7_acisf09530_pi14-548_cl_pass1_tfrozen_src18_1.ximg exists
[Tue Apr 10 17:46:44 2012] Fit fullrun_ccd7_acisf09530_pi14-548_cl_pass1_tfrozen_src18 appears to have run properly
[Tue Apr 10 17:47:06 2012] Spatial fit model total counts = 150.998000, observed total counts = 151.000000
[Tue Apr 10 17:47:06 2012] Offset between fit and detection position for source 55 = 0.018077 pixels
[Tue Apr 10 17:47:06 2012] 149.992700 total counts/ 37.652700 bgd. counts: snr = 18.307808
Spatial fit parameters:
  Offset between fit and detection position for source 55 = 0.018077 pixels
  Position = (897.8, 1240.3) = 3 38 21.66 -35 22 33.0
  Extent = 0.7 (0.7-0.9)", rotation angle = 0
  Source counts = 112.3 +/- 12.2
  Background counts = 37.7
  Rate = 0.002 +/- 0.0002
[Tue Apr 10 17:47:06 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 17:47:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 17:47:06 2012] Assessing source extent using major axis lower bound
[Tue Apr 10 17:47:06 2012] Source does appear to be extended
[Tue Apr 10 17:47:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Apr 10 17:49:00 2012] Not overwriting source region fullrun_ccd7_acisf09530_pi14-548_pass1_cl_src55_src.reg
[Tue Apr 10 17:49:00 2012] Extracting stamp from image fullrun_ccd7_acisf09530_pi14-548_cl_sm2.00.img.gz, (864, 1206) - (932, 1274)
[Tue Apr 10 17:49:00 2012] Writing fullrun_ccd7_acisf09530_pi14-548_pass1_cl_src55.gif
[Tue Apr 10 17:50:22 2012] ../../acisf09530/products/events/fullrun_ccd7_acisf09530_pi14-548_pass1_cl_src55_src.evt and ../../acisf09530/products/events/fullrun_ccd7_acisf09530_pi14-548_pass1_cl_src55_bgd.evt exist, delete to re-create
[Tue Apr 10 17:50:22 2012] Size of ../../acisf09530/products/events/fullrun_ccd7_acisf09530_pi14-548_pass1_cl_src55_src.evt.gz[events] = 129 counts
[Tue Apr 10 17:50:22 2012] Mean chipx,y = (80.66, 899.74)
[Tue Apr 10 17:50:22 2012] Mean tdetx,y = (3997.66, 2601.74)
[Tue Apr 10 17:50:22 2012] chipx,y range = (61.00-96.00, 881.00-924.00)
[Tue Apr 10 17:50:23 2012] Size of ../../acisf09530/products/events/fullrun_ccd7_acisf09530_pi14-548_pass1_cl_src55_bgd.evt.gz[events] = 115 counts
[Tue Apr 10 17:50:23 2012] ../../acisf09530/products/images/fullrun_ccd7_acisf09530_pi14-548_pass1_cl_src55_src.img and ../../acisf09530/products/images/fullrun_ccd7_acisf09530_pi14-548_pass1_cl_src55_bgd.img exist, delete to re-create
[Tue Apr 10 17:50:23 2012] ../../acisf09530/products/spectra/fullrun_ccd7_acisf09530_pi14-548_pass1_cl_src55_src.pi and ../../acisf09530/products/spectra/fullrun_ccd7_acisf09530_pi14-548_pass1_cl_src55_bgd.pi exist, delete to re-create
[Tue Apr 10 17:50:26 2012] ../../acisf09530/products/lightcurves/fullrun_ccd7_acisf09530_pi14-548_pass1_cl_src55_src.lc and ../../acisf09530/products/lightcurves/fullrun_ccd7_acisf09530_pi14-548_pass1_cl_src55_bgd.lc exist, delete to re-create
[Tue Apr 10 17:54:09 2012] Keeping rmf generated by specextract
[Tue Apr 10 17:54:09 2012] 210.242
[Tue Apr 10 17:54:16 2012] Updating aperture counts using extracted products
[Tue Apr 10 17:54:16 2012] Error reading totcts from fullrun_ccd7_acisf09530_pi14-548_pass1_cl_src55_src.pi.gz
[Tue Apr 10 17:54:17 2012] Calculating source flux in energy range 0.30-8.00
[Tue Apr 10 17:54:17 2012] Using photon index=1.80, rate=0.00189, arf fullrun_ccd7_acisf09530_pi14-548_pass1_cl_src55.arf
[Tue Apr 10 17:54:17 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Apr 10 17:54:17 2012] Updating source flux to 1.6e-14