[Tue Apr 10 17:43:50 2012] Detection parameters:
  Position = (637.7, 673.0) = 3 37 55.21 -35 23 12.6
  Extent = 0.9" x 0.7", rotation angle = 30 degrees
  Source counts = 22.3 +/- 5.0
  Background counts = 2.7
  Rate = 0.0004 +/- 8e-05

[Tue Apr 10 17:43:51 2012] Off-axis axis estimate = 5.37'
[Tue Apr 10 17:45:36 2012] Using EEF radius (= 1.33 ")to estimate initial spatial extent for simple fitting
[Tue Apr 10 17:45:36 2012] Initial guess for spatial extent in simple fitting = 1.33"
[Tue Apr 10 17:45:36 2012] source mask rpix=2.7, npix_max = 41, mask sum = 34, frac = 0.824
[Tue Apr 10 17:45:36 2012] Giving source the simple spatial ID 12 for pass 0, mean size = 1.33"
[Tue Apr 10 17:45:36 2012] fullrun_ccd6_acisf09530_pi14-548_cl_pass0_src12.ximg exists
[Tue Apr 10 17:45:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf09530_pi14-548_cl_pass0_src12.csv
[Tue Apr 10 17:45:36 2012] fullrun_ccd6_acisf09530_pi14-548_cl_pass0_src12_1.ximg exists
[Tue Apr 10 17:45:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf09530_pi14-548_cl_pass0_src12.csv
[Tue Apr 10 17:45:36 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf09530_pi14-548_cl_pass0_src12_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf09530_pi14-548_cl_pass0_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 17:45:37 2012] fullrun_ccd6_acisf09530_pi14-548_cl_pass0_tfrozen_src12.ximg exists
[Tue Apr 10 17:45:37 2012] fullrun_ccd6_acisf09530_pi14-548_cl_pass0_tfrozen_src12_1.ximg exists
[Tue Apr 10 17:45:37 2012] Fit fullrun_ccd6_acisf09530_pi14-548_cl_pass0_tfrozen_src12 appears to have run properly
[Tue Apr 10 17:46:02 2012] Spatial fit model total counts = 83.761400, observed total counts = 84.000000
[Tue Apr 10 17:46:02 2012] Offset between fit and detection position for source 10 = 1.136701 pixels
[Tue Apr 10 17:46:02 2012] 82.761060 total counts/ 4.762560 bgd. counts: snr = 35.740944
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 1.136701 pixels
  Position = (636.9, 673.8) = 3 37 55.26 -35 23 12.5
  Extent = 1.8 (1.3-2.2)", rotation angle = 0
  Source counts = 78.0 +/- 9.1
  Background counts = 4.8
  Rate = 0.001 +/- 0.0002
[Tue Apr 10 17:46:02 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 17:46:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 17:46:02 2012] Assessing source extent using major axis lower bound
[Tue Apr 10 17:46:02 2012] Source does appear to be extended
[Tue Apr 10 17:46:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Apr 10 17:46:39 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Apr 10 17:46:39 2012] Initial guess for spatial extent in simple fitting = 1.78"
[Tue Apr 10 17:46:39 2012] source mask rpix=3.6, npix_max = 68, mask sum = 50, frac = 0.735
[Tue Apr 10 17:46:39 2012] Giving source the simple spatial ID 10 for pass 1, mean size = 1.78"
[Tue Apr 10 17:46:40 2012] fullrun_ccd6_acisf09530_pi14-548_cl_pass1_src10.ximg exists
[Tue Apr 10 17:46:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf09530_pi14-548_cl_pass1_src10.csv
[Tue Apr 10 17:46:40 2012] fullrun_ccd6_acisf09530_pi14-548_cl_pass1_src10_1.ximg exists
[Tue Apr 10 17:46:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf09530_pi14-548_cl_pass1_src10.csv
[Tue Apr 10 17:46:40 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf09530_pi14-548_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf09530_pi14-548_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 17:46:41 2012] fullrun_ccd6_acisf09530_pi14-548_cl_pass1_tfrozen_src10.ximg exists
[Tue Apr 10 17:46:41 2012] fullrun_ccd6_acisf09530_pi14-548_cl_pass1_tfrozen_src10_1.ximg exists
[Tue Apr 10 17:46:41 2012] Fit fullrun_ccd6_acisf09530_pi14-548_cl_pass1_tfrozen_src10 appears to have run properly
[Tue Apr 10 17:46:54 2012] Spatial fit model total counts = 96.996400, observed total counts = 97.000000
[Tue Apr 10 17:46:54 2012] Offset between fit and detection position for source 10 = 0.394998 pixels
[Tue Apr 10 17:46:54 2012] 97.013200 total counts/ 26.908900 bgd. counts: snr = 13.514397
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.394998 pixels
  Position = (636.6, 673.5) = 3 37 55.28 -35 23 12.6
  Extent = 1.6 (1.2-1.7)", rotation angle = 0
  Source counts = 70.1 +/- 9.8
  Background counts = 26.9
  Rate = 0.001 +/- 0.0002
[Tue Apr 10 17:46:54 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 17:46:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 17:46:54 2012] Assessing source extent using major axis lower bound
[Tue Apr 10 17:46:54 2012] Source does appear to be extended
[Tue Apr 10 17:46:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Apr 10 17:48:01 2012] Not overwriting source region fullrun_ccd6_acisf09530_pi14-548_pass1_cl_src10_src.reg
[Tue Apr 10 17:48:01 2012] Extracting stamp from image fullrun_ccd6_acisf09530_pi14-548_cl_sm2.00.img.gz, (562, 599) - (712, 749)
[Tue Apr 10 17:48:01 2012] Writing fullrun_ccd6_acisf09530_pi14-548_pass1_cl_src10.gif
[Tue Apr 10 17:48:31 2012] ../../acisf09530/products/events/fullrun_ccd6_acisf09530_pi14-548_pass1_cl_src10_src.evt and ../../acisf09530/products/events/fullrun_ccd6_acisf09530_pi14-548_pass1_cl_src10_bgd.evt exist, delete to re-create
[Tue Apr 10 17:48:31 2012] Size of ../../acisf09530/products/events/fullrun_ccd6_acisf09530_pi14-548_pass1_cl_src10_src.evt.gz[events] = 97 counts
[Tue Apr 10 17:48:31 2012] Mean chipx,y = (580.37, 522.12)
[Tue Apr 10 17:48:31 2012] Mean tdetx,y = (3455.37, 2224.12)
[Tue Apr 10 17:48:31 2012] chipx,y range = (553.00-607.00, 499.00-547.00)
[Tue Apr 10 17:48:32 2012] Size of ../../acisf09530/products/events/fullrun_ccd6_acisf09530_pi14-548_pass1_cl_src10_bgd.evt.gz[events] = 266 counts
[Tue Apr 10 17:48:32 2012] ../../acisf09530/products/images/fullrun_ccd6_acisf09530_pi14-548_pass1_cl_src10_src.img and ../../acisf09530/products/images/fullrun_ccd6_acisf09530_pi14-548_pass1_cl_src10_bgd.img exist, delete to re-create
[Tue Apr 10 17:48:32 2012] ../../acisf09530/products/spectra/fullrun_ccd6_acisf09530_pi14-548_pass1_cl_src10_src.pi and ../../acisf09530/products/spectra/fullrun_ccd6_acisf09530_pi14-548_pass1_cl_src10_bgd.pi exist, delete to re-create
[Tue Apr 10 17:48:32 2012] Not generating rmf since there are only 70 counts
[Tue Apr 10 17:48:35 2012] ../../acisf09530/products/lightcurves/fullrun_ccd6_acisf09530_pi14-548_pass1_cl_src10_src.lc and ../../acisf09530/products/lightcurves/fullrun_ccd6_acisf09530_pi14-548_pass1_cl_src10_bgd.lc exist, delete to re-create
[Tue Apr 10 17:48:59 2012] 174.871
[Tue Apr 10 17:54:15 2012] Updating aperture counts using extracted products
[Tue Apr 10 17:54:15 2012] Error reading totcts from fullrun_ccd6_acisf09530_pi14-548_pass1_cl_src10_src.pi.gz
[Tue Apr 10 17:54:15 2012] Calculating source flux in energy range 0.30-8.00
[Tue Apr 10 17:54:15 2012] Using photon index=1.80, rate=0.00118, arf fullrun_ccd6_acisf09530_pi14-548_pass1_cl_src10.arf
[Tue Apr 10 17:54:15 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Apr 10 17:54:15 2012] Updating source flux to 1.5e-14
[Tue Apr 10 17:54:49 2012] Source 10 has fewer than 100.000000 counts, skipping spectral fitting