[Tue Sep 27 13:44:53 2011] Detection parameters:
  Position = (616.2, 381.5) = 15 1 17.43 1 39 52.6
  Extent = 0.5" x 0.5", rotation angle = 110 degrees
  Source counts = 108.8 +/- 11.2
  Background counts = 16.2
  Rate = 0.001 +/- 0.0001

[Tue Sep 27 13:44:59 2011] Off-axis axis estimate = 2.80'
[Tue Sep 27 13:47:39 2011] Using EEF radius (= 0.54 ")to estimate initial spatial extent for simple fitting
[Tue Sep 27 13:47:39 2011] Initial guess for spatial extent in simple fitting = 0.54"
[Tue Sep 27 13:47:39 2011] source mask rpix=1.1, npix_max = 10, mask sum = 9, frac = 0.876
[Tue Sep 27 13:47:39 2011] Giving source the simple spatial ID 22 for pass 0, mean size = 0.54"
[Tue Sep 27 13:47:45 2011] fullrun_ccd7_acisf09517_pi14-548_cl_pass0_src22.ximg exists
[Tue Sep 27 13:47:45 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf09517_pi14-548_cl_pass0_src22.csv
[Tue Sep 27 13:47:45 2011] fullrun_ccd7_acisf09517_pi14-548_cl_pass0_src22_1.ximg exists
[Tue Sep 27 13:47:45 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf09517_pi14-548_cl_pass0_src22.csv
[Tue Sep 27 13:47:45 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf09517_pi14-548_cl_pass0_src22_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf09517_pi14-548_cl_pass0_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep 27 13:47:51 2011] fullrun_ccd7_acisf09517_pi14-548_cl_pass0_tfrozen_src22.ximg exists
[Tue Sep 27 13:47:51 2011] fullrun_ccd7_acisf09517_pi14-548_cl_pass0_tfrozen_src22_1.ximg exists
[Tue Sep 27 13:47:51 2011] Fit fullrun_ccd7_acisf09517_pi14-548_cl_pass0_tfrozen_src22 appears to have run properly
[Tue Sep 27 13:48:11 2011] Spatial fit model total counts = 152.665000, observed total counts = 154.000000
[Tue Sep 27 13:48:11 2011] Offset between fit and detection position for source 18 = 0.696565 pixels
[Tue Sep 27 13:48:11 2011] 152.070500 total counts/ 47.187500 bgd. counts: snr = 15.268333
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 0.696565 pixels
  Position = (616.6, 382.0) = 15 1 17.44 1 39 52.6
  Extent = 0.6 (0.5-0.7)", rotation angle = 0
  Source counts = 104.9 +/- 12.3
  Background counts = 47.2
  Rate = 0.001 +/- 0.0001
[Tue Sep 27 13:48:11 2011] Vigneting correction estimate = 1.000000
[Tue Sep 27 13:48:11 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep 27 13:48:11 2011] Assessing source extent using major axis lower bound
[Tue Sep 27 13:48:11 2011] Source does appear to be extended
[Tue Sep 27 13:48:11 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Sep 27 13:48:38 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Sep 27 13:48:38 2011] Initial guess for spatial extent in simple fitting = 0.59"
[Tue Sep 27 13:48:38 2011] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.049
[Tue Sep 27 13:48:38 2011] Giving source the simple spatial ID 22 for pass 1, mean size = 0.59"
[Tue Sep 27 13:48:42 2011] fullrun_ccd7_acisf09517_pi14-548_cl_pass1_src22.ximg exists
[Tue Sep 27 13:48:42 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf09517_pi14-548_cl_pass1_src22.csv
[Tue Sep 27 13:48:42 2011] fullrun_ccd7_acisf09517_pi14-548_cl_pass1_src22_1.ximg exists
[Tue Sep 27 13:48:42 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf09517_pi14-548_cl_pass1_src22.csv
[Tue Sep 27 13:48:42 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf09517_pi14-548_cl_pass1_src22_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf09517_pi14-548_cl_pass1_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep 27 13:48:46 2011] fullrun_ccd7_acisf09517_pi14-548_cl_pass1_tfrozen_src22.ximg exists
[Tue Sep 27 13:48:46 2011] fullrun_ccd7_acisf09517_pi14-548_cl_pass1_tfrozen_src22_1.ximg exists
[Tue Sep 27 13:48:46 2011] Fit fullrun_ccd7_acisf09517_pi14-548_cl_pass1_tfrozen_src22 appears to have run properly
[Tue Sep 27 13:49:04 2011] Spatial fit model total counts = 152.000000, observed total counts = 152.000000
[Tue Sep 27 13:49:04 2011] Offset between fit and detection position for source 18 = 0.002971 pixels
[Tue Sep 27 13:49:04 2011] 152.046600 total counts/ 46.057600 bgd. counts: snr = 15.617451
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 0.002971 pixels
  Position = (616.6, 382.0) = 15 1 17.44 1 39 52.6
  Extent = 0.6 (0.5-0.7)", rotation angle = 0
  Source counts = 106.0 +/- 12.3
  Background counts = 46.1
  Rate = 0.001 +/- 0.0001
[Tue Sep 27 13:49:04 2011] Vigneting correction estimate = 1.000000
[Tue Sep 27 13:49:04 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep 27 13:49:04 2011] Assessing source extent using major axis lower bound
[Tue Sep 27 13:49:04 2011] Source does appear to be extended
[Tue Sep 27 13:49:04 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Sep 27 13:51:16 2011] Not overwriting source region fullrun_ccd7_acisf09517_pi14-548_pass1_cl_src18_src.reg
[Tue Sep 27 13:51:16 2011] Extracting stamp from image fullrun_ccd7_acisf09517_pi14-548_cl_sm2.00.img.gz, (590, 355) - (643, 409)
[Tue Sep 27 13:51:16 2011] Writing fullrun_ccd7_acisf09517_pi14-548_pass1_cl_src18.gif
[Tue Sep 27 13:52:30 2011] ../../acisf09517/products/events/fullrun_ccd7_acisf09517_pi14-548_pass1_cl_src18_src.evt and ../../acisf09517/products/events/fullrun_ccd7_acisf09517_pi14-548_pass1_cl_src18_bgd.evt exist, delete to re-create
[Tue Sep 27 13:52:30 2011] Size of ../../acisf09517/products/events/fullrun_ccd7_acisf09517_pi14-548_pass1_cl_src18_src.evt.gz[events] = 119 counts
[Tue Sep 27 13:52:30 2011] Mean chipx,y = (330.70, 192.41)
[Tue Sep 27 13:52:30 2011] Mean tdetx,y = (4247.70, 1894.41)
[Tue Sep 27 13:52:30 2011] chipx,y range = (312.00-350.00, 173.00-209.00)
[Tue Sep 27 13:52:30 2011] Size of ../../acisf09517/products/events/fullrun_ccd7_acisf09517_pi14-548_pass1_cl_src18_bgd.evt.gz[events] = 142 counts
[Tue Sep 27 13:52:30 2011] ../../acisf09517/products/images/fullrun_ccd7_acisf09517_pi14-548_pass1_cl_src18_src.img and ../../acisf09517/products/images/fullrun_ccd7_acisf09517_pi14-548_pass1_cl_src18_bgd.img exist, delete to re-create
[Tue Sep 27 13:52:30 2011] ../../acisf09517/products/spectra/fullrun_ccd7_acisf09517_pi14-548_pass1_cl_src18_src.pi and ../../acisf09517/products/spectra/fullrun_ccd7_acisf09517_pi14-548_pass1_cl_src18_bgd.pi exist, delete to re-create
[Tue Sep 27 13:52:33 2011] ../../acisf09517/products/lightcurves/fullrun_ccd7_acisf09517_pi14-548_pass1_cl_src18_src.lc and ../../acisf09517/products/lightcurves/fullrun_ccd7_acisf09517_pi14-548_pass1_cl_src18_bgd.lc exist, delete to re-create
[Tue Sep 27 13:54:39 2011] Keeping rmf generated by specextract
[Tue Sep 27 13:54:39 2011] 228.425
[Tue Sep 27 13:54:44 2011] Updating aperture counts using extracted products
[Tue Sep 27 13:54:44 2011] Error reading totcts from fullrun_ccd7_acisf09517_pi14-548_pass1_cl_src18_src.pi.gz
[Tue Sep 27 13:54:45 2011] Calculating source flux in energy range 0.30-8.00
[Tue Sep 27 13:54:45 2011] Using photon index=1.80, rate=0.00107, arf fullrun_ccd7_acisf09517_pi14-548_pass1_cl_src18.arf
[Tue Sep 27 13:54:45 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Sep 27 13:54:45 2011] Updating source flux to 8.2e-15