[Tue Sep 27 13:44:48 2011] Detection parameters:
  Position = (1122.4, 589.4) = 15 0 37.69 1 35 19.5
  Extent = 3.2" x 2.9", rotation angle = 161 degrees
  Source counts = 276.3 +/- 19.9
  Background counts = 119.7
  Rate = 0.003 +/- 0.0002

[Tue Sep 27 13:44:50 2011] Off-axis axis estimate = 9.07'
[Tue Sep 27 13:47:36 2011] Using EEF radius (= 3.64 ")to estimate initial spatial extent for simple fitting
[Tue Sep 27 13:47:36 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Sep 27 13:47:36 2011] Initial guess for spatial extent in simple fitting = 3.64"
[Tue Sep 27 13:47:36 2011] source mask rpix=7.4, npix_max = 249, mask sum = 225, frac = 0.903
[Tue Sep 27 13:47:36 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 3.64"
[Tue Sep 27 13:47:37 2011] fullrun_ccd6_acisf09517_pi14-548_cl_pass0_src1.ximg exists
[Tue Sep 27 13:47:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf09517_pi14-548_cl_pass0_src1.csv
[Tue Sep 27 13:47:37 2011] fullrun_ccd6_acisf09517_pi14-548_cl_pass0_src1_1.ximg exists
[Tue Sep 27 13:47:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf09517_pi14-548_cl_pass0_src1.csv
[Tue Sep 27 13:47:37 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf09517_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf09517_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep 27 13:47:38 2011] fullrun_ccd6_acisf09517_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Tue Sep 27 13:47:38 2011] fullrun_ccd6_acisf09517_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Sep 27 13:47:38 2011] Fit fullrun_ccd6_acisf09517_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Sep 27 13:48:01 2011] Spatial fit model total counts = 426.559000, observed total counts = 430.000000
[Tue Sep 27 13:48:01 2011] Offset between fit and detection position for source 1 = 0.291871 pixels
[Tue Sep 27 13:48:01 2011] 427.102000 total counts/ 119.034000 bgd. counts: snr = 28.236514
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.291871 pixels
  Position = (1122.2, 589.6) = 15 0 37.71 1 35 19.3
  Extent = 4.8 (4.3-5.5)", rotation angle = 0
  Source counts = 308.1 +/- 20.7
  Background counts = 119.0
  Rate = 0.003 +/- 0.0002
[Tue Sep 27 13:48:01 2011] Vigneting correction estimate = 1.000000
[Tue Sep 27 13:48:01 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep 27 13:48:01 2011] Assessing source extent using major axis lower bound
[Tue Sep 27 13:48:01 2011] Source does appear to be extended
[Tue Sep 27 13:48:01 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Sep 27 13:48:34 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Sep 27 13:48:34 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Sep 27 13:48:34 2011] Initial guess for spatial extent in simple fitting = 4.82"
[Tue Sep 27 13:48:34 2011] source mask rpix=9.8, npix_max = 423, mask sum = 420, frac = 0.991
[Tue Sep 27 13:48:34 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 4.82"
[Tue Sep 27 13:48:36 2011] fullrun_ccd6_acisf09517_pi14-548_cl_pass1_src1.ximg exists
[Tue Sep 27 13:48:36 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf09517_pi14-548_cl_pass1_src1.csv
[Tue Sep 27 13:48:36 2011] fullrun_ccd6_acisf09517_pi14-548_cl_pass1_src1_1.ximg exists
[Tue Sep 27 13:48:36 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf09517_pi14-548_cl_pass1_src1.csv
[Tue Sep 27 13:48:36 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf09517_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf09517_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep 27 13:48:37 2011] fullrun_ccd6_acisf09517_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Tue Sep 27 13:48:37 2011] fullrun_ccd6_acisf09517_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Sep 27 13:48:37 2011] Fit fullrun_ccd6_acisf09517_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Sep 27 13:48:56 2011] Spatial fit model total counts = 512.250000, observed total counts = 515.000000
[Tue Sep 27 13:48:56 2011] Offset between fit and detection position for source 1 = 0.567597 pixels
[Tue Sep 27 13:48:56 2011] 511.558000 total counts/ 195.631000 bgd. counts: snr = 22.587487
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.567597 pixels
  Position = (1122.6, 590.0) = 15 0 37.70 1 35 19.5
  Extent = 4.9 (4.4-5.4)", rotation angle = 0
  Source counts = 315.9 +/- 22.6
  Background counts = 195.6
  Rate = 0.003 +/- 0.0002
[Tue Sep 27 13:48:56 2011] Vigneting correction estimate = 1.000000
[Tue Sep 27 13:48:56 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep 27 13:48:56 2011] Assessing source extent using major axis lower bound
[Tue Sep 27 13:48:56 2011] Source does appear to be extended
[Tue Sep 27 13:48:56 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Sep 27 13:50:01 2011] Not overwriting source region fullrun_ccd6_acisf09517_pi14-548_pass1_cl_src1_src.reg
[Tue Sep 27 13:50:01 2011] Extracting stamp from image fullrun_ccd6_acisf09517_pi14-548_cl_sm2.00.img.gz, (900, 367) - (1345, 813)
[Tue Sep 27 13:50:01 2011] Writing fullrun_ccd6_acisf09517_pi14-548_pass1_cl_src1.gif
[Tue Sep 27 13:50:04 2011] ../../acisf09517/products/events/fullrun_ccd6_acisf09517_pi14-548_pass1_cl_src1_src.evt and ../../acisf09517/products/events/fullrun_ccd6_acisf09517_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Tue Sep 27 13:50:04 2011] Size of ../../acisf09517/products/events/fullrun_ccd6_acisf09517_pi14-548_pass1_cl_src1_src.evt.gz[events] = 477 counts
[Tue Sep 27 13:50:04 2011] Mean chipx,y = (147.92, 714.16)
[Tue Sep 27 13:50:04 2011] Mean tdetx,y = (3022.92, 2416.16)
[Tue Sep 27 13:50:04 2011] chipx,y range = (99.00-202.00, 662.00-764.00)
[Tue Sep 27 13:50:04 2011] Size of ../../acisf09517/products/events/fullrun_ccd6_acisf09517_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 1955 counts
[Tue Sep 27 13:50:04 2011] ../../acisf09517/products/images/fullrun_ccd6_acisf09517_pi14-548_pass1_cl_src1_src.img and ../../acisf09517/products/images/fullrun_ccd6_acisf09517_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Tue Sep 27 13:50:04 2011] ../../acisf09517/products/spectra/fullrun_ccd6_acisf09517_pi14-548_pass1_cl_src1_src.pi and ../../acisf09517/products/spectra/fullrun_ccd6_acisf09517_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Tue Sep 27 13:50:07 2011] ../../acisf09517/products/lightcurves/fullrun_ccd6_acisf09517_pi14-548_pass1_cl_src1_src.lc and ../../acisf09517/products/lightcurves/fullrun_ccd6_acisf09517_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Tue Sep 27 13:51:14 2011] Keeping rmf generated by specextract
[Tue Sep 27 13:51:14 2011] 174.274
[Tue Sep 27 13:54:43 2011] Updating aperture counts using extracted products
[Tue Sep 27 13:54:43 2011] Error reading totcts from fullrun_ccd6_acisf09517_pi14-548_pass1_cl_src1_src.pi.gz
[Tue Sep 27 13:54:43 2011] Calculating source flux in energy range 0.30-8.00
[Tue Sep 27 13:54:43 2011] Using photon index=1.80, rate=0.0032, arf fullrun_ccd6_acisf09517_pi14-548_pass1_cl_src1.arf
[Tue Sep 27 13:54:43 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Sep 27 13:54:43 2011] Updating source flux to 3.8e-14
[Tue Sep 27 13:55:24 2011] Reading fit data from acisf09517/analysis//spectral/fullrun_ccd6_acisf09517_pi14-548_pass1_cl_src1_pl.csv
[Tue Sep 27 13:55:24 2011] Spectral fit parameter nH value = 1.02478e+21
[Tue Sep 27 13:55:24 2011] Spectral fit parameter PhoIndex value = 2.06178
[Tue Sep 27 13:55:24 2011] Failed to get F(0.3-8.0) from acisf09517/analysis//spectral/fullrun_ccd6_acisf09517_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Tue Sep 27 13:55:24 2011] Calculating source flux in energy range 0.30-8.00
[Tue Sep 27 13:55:24 2011] Using Nh = 1e+21, photon index=2.06, rate=0.0032, arf fullrun_ccd6_acisf09517_pi14-548_pass1_cl_src1.arf
[Tue Sep 27 13:55:24 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Sep 27 13:55:24 2011] Updating source flux to 3.4e-14