[Tue Sep 27 13:44:46 2011] Detection parameters:
  Position = (507.4, 1159.3) = 15 0 52.12 1 54 53.3
  Extent = 5.2" x 4.3", rotation angle = 47 degrees
  Source counts = 934.6 +/- 38.4
  Background counts = 540.4
  Rate = 0.009 +/- 0.0004

[Tue Sep 27 13:44:47 2011] Off-axis axis estimate = 14.61'
[Tue Sep 27 13:47:28 2011] Using EEF radius (= 9.64 ")to estimate initial spatial extent for simple fitting
[Tue Sep 27 13:47:28 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Sep 27 13:47:28 2011] Initial guess for spatial extent in simple fitting = 9.64"
[Tue Sep 27 13:47:28 2011] source mask rpix=19.6, npix_max = 1613, mask sum = 1600, frac = 0.992
[Tue Sep 27 13:47:28 2011] Giving source the simple spatial ID 2 for pass 0, mean size = 9.64"
[Tue Sep 27 13:47:29 2011] fullrun_ccd3_acisf09517_pi14-548_cl_pass0_src2.ximg exists
[Tue Sep 27 13:47:29 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf09517_pi14-548_cl_pass0_src2.csv
[Tue Sep 27 13:47:29 2011] fullrun_ccd3_acisf09517_pi14-548_cl_pass0_src2_1.ximg exists
[Tue Sep 27 13:47:29 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf09517_pi14-548_cl_pass0_src2.csv
[Tue Sep 27 13:47:29 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf09517_pi14-548_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf09517_pi14-548_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep 27 13:47:30 2011] fullrun_ccd3_acisf09517_pi14-548_cl_pass0_tfrozen_src2.ximg exists
[Tue Sep 27 13:47:30 2011] fullrun_ccd3_acisf09517_pi14-548_cl_pass0_tfrozen_src2_1.ximg exists
[Tue Sep 27 13:47:30 2011] Fit fullrun_ccd3_acisf09517_pi14-548_cl_pass0_tfrozen_src2 appears to have run properly
[Tue Sep 27 13:47:58 2011] Spatial fit model total counts = 1705.870000, observed total counts = 1679.000000
[Tue Sep 27 13:47:58 2011] Offset between fit and detection position for source 2 = 1.229609 pixels
[Tue Sep 27 13:47:58 2011] 1706.174000 total counts/ 372.624000 bgd. counts: snr = 69.083430
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 1.229609 pixels
  Position = (508.0, 1160.4) = 15 0 52.12 1 54 53.6
  Extent = 8.6 (8.1-9.1)", rotation angle = 0
  Source counts = 1333.5 +/- 41.3
  Background counts = 372.6
  Rate = 0.01 +/- 0.0004
[Tue Sep 27 13:47:58 2011] Vigneting correction estimate = 1.000000
[Tue Sep 27 13:47:58 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep 27 13:47:58 2011] Assessing source extent using major axis lower bound
[Tue Sep 27 13:47:58 2011] Source does appear to be extended
[Tue Sep 27 13:47:58 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Sep 27 13:48:33 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Sep 27 13:48:33 2011] Initial guess for spatial extent in simple fitting = 8.61"
[Tue Sep 27 13:48:33 2011] source mask rpix=17.5, npix_max = 1296, mask sum = 1296, frac = 0.999
[Tue Sep 27 13:48:33 2011] Giving source the simple spatial ID 2 for pass 1, mean size = 8.61"
[Tue Sep 27 13:48:33 2011] fullrun_ccd3_acisf09517_pi14-548_cl_pass1_src2.ximg exists
[Tue Sep 27 13:48:33 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf09517_pi14-548_cl_pass1_src2.csv
[Tue Sep 27 13:48:33 2011] fullrun_ccd3_acisf09517_pi14-548_cl_pass1_src2_1.ximg exists
[Tue Sep 27 13:48:33 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf09517_pi14-548_cl_pass1_src2.csv
[Tue Sep 27 13:48:33 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf09517_pi14-548_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf09517_pi14-548_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep 27 13:48:33 2011] fullrun_ccd3_acisf09517_pi14-548_cl_pass1_tfrozen_src2.ximg exists
[Tue Sep 27 13:48:33 2011] fullrun_ccd3_acisf09517_pi14-548_cl_pass1_tfrozen_src2_1.ximg exists
[Tue Sep 27 13:48:33 2011] Fit fullrun_ccd3_acisf09517_pi14-548_cl_pass1_tfrozen_src2 appears to have run properly
[Tue Sep 27 13:48:53 2011] Spatial fit model total counts = 1651.650000, observed total counts = 1631.000000
[Tue Sep 27 13:48:53 2011] Offset between fit and detection position for source 2 = 0.077077 pixels
[Tue Sep 27 13:48:53 2011] 1651.573000 total counts/ 400.053000 bgd. counts: snr = 62.571855
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.077077 pixels
  Position = (508.0, 1160.5) = 15 0 52.12 1 54 53.7
  Extent = 8.3 (7.7-8.8)", rotation angle = 0
  Source counts = 1251.5 +/- 40.6
  Background counts = 400.1
  Rate = 0.01 +/- 0.0004
[Tue Sep 27 13:48:53 2011] Vigneting correction estimate = 1.000000
[Tue Sep 27 13:48:53 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep 27 13:48:53 2011] Assessing source extent using major axis lower bound
[Tue Sep 27 13:48:53 2011] Source does appear to be extended
[Tue Sep 27 13:48:53 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Sep 27 13:49:20 2011] Not overwriting source region fullrun_ccd3_acisf09517_pi14-548_pass1_cl_src2_src.reg
[Tue Sep 27 13:49:20 2011] Extracting stamp from image fullrun_ccd3_acisf09517_pi14-548_cl_sm2.00.img.gz, (130, 782) - (886, 1457)
[Tue Sep 27 13:49:20 2011] Writing fullrun_ccd3_acisf09517_pi14-548_pass1_cl_src2.gif
[Tue Sep 27 13:49:24 2011] ../../acisf09517/products/events/fullrun_ccd3_acisf09517_pi14-548_pass1_cl_src2_src.evt and ../../acisf09517/products/events/fullrun_ccd3_acisf09517_pi14-548_pass1_cl_src2_bgd.evt exist, delete to re-create
[Tue Sep 27 13:49:24 2011] Size of ../../acisf09517/products/events/fullrun_ccd3_acisf09517_pi14-548_pass1_cl_src2_src.evt.gz[events] = 1694 counts
[Tue Sep 27 13:49:24 2011] Mean chipx,y = (637.43, 50.00)
[Tue Sep 27 13:49:24 2011] Mean tdetx,y = (5082.00, 3698.43)
[Tue Sep 27 13:49:24 2011] chipx,y range = (562.00-718.00, 3.00-128.00)
[Tue Sep 27 13:49:24 2011] Size of ../../acisf09517/products/events/fullrun_ccd3_acisf09517_pi14-548_pass1_cl_src2_bgd.evt.gz[events] = 2809 counts
[Tue Sep 27 13:49:24 2011] ../../acisf09517/products/images/fullrun_ccd3_acisf09517_pi14-548_pass1_cl_src2_src.img and ../../acisf09517/products/images/fullrun_ccd3_acisf09517_pi14-548_pass1_cl_src2_bgd.img exist, delete to re-create
[Tue Sep 27 13:49:24 2011] ../../acisf09517/products/spectra/fullrun_ccd3_acisf09517_pi14-548_pass1_cl_src2_src.pi and ../../acisf09517/products/spectra/fullrun_ccd3_acisf09517_pi14-548_pass1_cl_src2_bgd.pi exist, delete to re-create
[Tue Sep 27 13:49:27 2011] ../../acisf09517/products/lightcurves/fullrun_ccd3_acisf09517_pi14-548_pass1_cl_src2_src.lc and ../../acisf09517/products/lightcurves/fullrun_ccd3_acisf09517_pi14-548_pass1_cl_src2_bgd.lc exist, delete to re-create
[Tue Sep 27 13:49:55 2011] Keeping rmf generated by specextract
[Tue Sep 27 13:49:56 2011] 139.904
[Tue Sep 27 13:54:43 2011] Updating aperture counts using extracted products
[Tue Sep 27 13:54:43 2011] Error reading totcts from fullrun_ccd3_acisf09517_pi14-548_pass1_cl_src2_src.pi.gz
[Tue Sep 27 13:54:43 2011] Calculating source flux in energy range 0.30-8.00
[Tue Sep 27 13:54:43 2011] Using photon index=1.80, rate=0.0127, arf fullrun_ccd3_acisf09517_pi14-548_pass1_cl_src2.arf
[Tue Sep 27 13:54:43 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Sep 27 13:54:43 2011] Updating source flux to 2e-13
[Tue Sep 27 13:54:54 2011] Reading fit data from acisf09517/analysis//spectral/fullrun_ccd3_acisf09517_pi14-548_pass1_cl_src2_pl.csv
[Tue Sep 27 13:54:54 2011] Spectral fit parameter nH value = 3.60534e+21
[Tue Sep 27 13:54:54 2011] Spectral fit parameter PhoIndex value = 4.5122
[Tue Sep 27 13:54:54 2011] Failed to get F(0.3-8.0) from acisf09517/analysis//spectral/fullrun_ccd3_acisf09517_pi14-548_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Tue Sep 27 13:54:54 2011] Calculating source flux in energy range 0.30-8.00
[Tue Sep 27 13:54:54 2011] Using Nh = 3.6e+21, photon index=4.51, rate=0.0127, arf fullrun_ccd3_acisf09517_pi14-548_pass1_cl_src2.arf
[Tue Sep 27 13:54:54 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Sep 27 13:54:54 2011] Updating source flux to 1.4e-13