[Mon Oct 10 07:24:53 2011] Detection parameters: Position = (645.7, 173.8) = 12 49 0.80 15 13 2.8 Extent = 2.6" x 2.1", rotation angle = 48 degrees Source counts = 17.7 +/- 5.1 Background counts = 8.3 Rate = 0.0006 +/- 0.0002 [Mon Oct 10 07:24:53 2011] Off-axis axis estimate = 9.66' [Mon Oct 10 07:25:40 2011] Using EEF radius (= 4.13 ")to estimate initial spatial extent for simple fitting [Mon Oct 10 07:25:40 2011] Initial guess for spatial extent in simple fitting = 4.13" [Mon Oct 10 07:25:40 2011] source mask rpix=8.4, npix_max = 315, mask sum = 315, frac = 0.997 [Mon Oct 10 07:25:40 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 4.13" [Mon Oct 10 07:25:45 2011] fullrun_ccd2_acisf09512_pi14-548_cl_pass0_src3.ximg exists [Mon Oct 10 07:25:45 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf09512_pi14-548_cl_pass0_src3.csv [Mon Oct 10 07:25:45 2011] fullrun_ccd2_acisf09512_pi14-548_cl_pass0_src3_1.ximg exists [Mon Oct 10 07:25:45 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf09512_pi14-548_cl_pass0_src3.csv [Mon Oct 10 07:25:45 2011] It looks like the fit did not converge You should probably delete fullrun_ccd2_acisf09512_pi14-548_cl_pass0_src3_1.ximg Either tweak this fit manually starting from fullrun_ccd2_acisf09512_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Mon Oct 10 07:25:45 2011] fullrun_ccd2_acisf09512_pi14-548_cl_pass0_tfrozen_src3.ximg exists [Mon Oct 10 07:25:45 2011] fullrun_ccd2_acisf09512_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists [Mon Oct 10 07:25:45 2011] Fit fullrun_ccd2_acisf09512_pi14-548_cl_pass0_tfrozen_src3 appears to have run properly [Mon Oct 10 07:25:59 2011] Spatial fit model total counts = 104.073000, observed total counts = 105.000000 [Mon Oct 10 07:25:59 2011] Offset between fit and detection position for source 3 = 2.167089 pixels [Mon Oct 10 07:25:59 2011] Warning, changing simple spatial fit ID from 3 to 1 [Mon Oct 10 07:25:59 2011] 103.526690 total counts/ 98.203900 bgd. counts: snr = 0.537125 Spatial fit parameters: Offset between fit and detection position for source 3 = 2.167089 pixels Position = (647.8, 174.2) = 12 49 0.74 15 13 2.7 Extent = 1.1" x 1.1", rotation angle = 0 Source counts = 5.3 +/- 10.2 Background counts = 98.2 Rate = 0.0002 +/- 0.0003 Deleting source due to low Poisson probability