[Sat Oct 22 15:14:17 2011] Detection parameters:
  Position = (1303.9, 755.5) = 11 50 36.78 -28 47 5.9
  Extent = 0.9" x 0.6", rotation angle = 21 degrees
  Source counts = 25.6 +/- 6.9
  Background counts = 22.4
  Rate = 0.0003 +/- 9e-05

[Sat Oct 22 15:14:20 2011] Off-axis axis estimate = 6.81'
[Sat Oct 22 15:15:56 2011] Using EEF radius (= 2.07 ")to estimate initial spatial extent for simple fitting
[Sat Oct 22 15:15:56 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Oct 22 15:15:56 2011] Initial guess for spatial extent in simple fitting = 2.07"
[Sat Oct 22 15:15:56 2011] source mask rpix=4.2, npix_max = 88, mask sum = 90, frac = 1.017
[Sat Oct 22 15:15:56 2011] Giving source the simple spatial ID 48 for pass 0, mean size = 2.07"
[Sat Oct 22 15:15:59 2011] fullrun_ccd7_acisf09507_pi14-548_cl_pass0_src48.ximg exists
[Sat Oct 22 15:15:59 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf09507_pi14-548_cl_pass0_src48.csv
[Sat Oct 22 15:15:59 2011] fullrun_ccd7_acisf09507_pi14-548_cl_pass0_src48_1.ximg exists
[Sat Oct 22 15:15:59 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf09507_pi14-548_cl_pass0_src48.csv
[Sat Oct 22 15:15:59 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf09507_pi14-548_cl_pass0_src48_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf09507_pi14-548_cl_pass0_src48.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 22 15:16:01 2011] fullrun_ccd7_acisf09507_pi14-548_cl_pass0_tfrozen_src48.ximg exists
[Sat Oct 22 15:16:01 2011] fullrun_ccd7_acisf09507_pi14-548_cl_pass0_tfrozen_src48_1.ximg exists
[Sat Oct 22 15:16:01 2011] Fit fullrun_ccd7_acisf09507_pi14-548_cl_pass0_tfrozen_src48 appears to have run properly
[Sat Oct 22 15:16:25 2011] Spatial fit model total counts = 76.968600, observed total counts = 77.000000
[Sat Oct 22 15:16:25 2011] Offset between fit and detection position for source 74 = 0.885875 pixels
[Sat Oct 22 15:16:25 2011] 77.663800 total counts/ 66.065200 bgd. counts: snr = 1.426984
Spatial fit parameters:
  Offset between fit and detection position for source 74 = 0.885875 pixels
  Position = (1304.7, 756.0) = 11 50 36.77 -28 47 5.9
  Extent = 0.8 (0.5-1.5)", rotation angle = 0
  Source counts = 11.6 +/- 8.8
  Background counts = 66.1
  Rate = 0.0001 +/- 0.0001
  Deleting source due to low Poisson probability