[Sat Oct 22 15:14:17 2011] Detection parameters:
  Position = (1063.5, 1042.8) = 11 50 45.79 -28 44 44.7
  Extent = 1.0" x 1.0", rotation angle = 4 degrees
  Source counts = 30.5 +/- 7.5
  Background counts = 25.5
  Rate = 0.0004 +/- 9e-05

[Sat Oct 22 15:14:20 2011] Off-axis axis estimate = 6.35'
[Sat Oct 22 15:15:56 2011] Using EEF radius (= 1.81 ")to estimate initial spatial extent for simple fitting
[Sat Oct 22 15:15:56 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Oct 22 15:15:56 2011] Initial guess for spatial extent in simple fitting = 1.81"
[Sat Oct 22 15:15:56 2011] source mask rpix=3.7, npix_max = 69, mask sum = 72, frac = 1.029
[Sat Oct 22 15:15:56 2011] Giving source the simple spatial ID 39 for pass 0, mean size = 1.81"
[Sat Oct 22 15:15:59 2011] fullrun_ccd7_acisf09507_pi14-548_cl_pass0_src39.ximg exists
[Sat Oct 22 15:15:59 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf09507_pi14-548_cl_pass0_src39.csv
[Sat Oct 22 15:15:59 2011] fullrun_ccd7_acisf09507_pi14-548_cl_pass0_src39_1.ximg exists
[Sat Oct 22 15:15:59 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf09507_pi14-548_cl_pass0_src39.csv
[Sat Oct 22 15:15:59 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf09507_pi14-548_cl_pass0_src39_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf09507_pi14-548_cl_pass0_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 22 15:16:01 2011] fullrun_ccd7_acisf09507_pi14-548_cl_pass0_tfrozen_src39.ximg exists
[Sat Oct 22 15:16:01 2011] fullrun_ccd7_acisf09507_pi14-548_cl_pass0_tfrozen_src39_1.ximg exists
[Sat Oct 22 15:16:01 2011] Fit fullrun_ccd7_acisf09507_pi14-548_cl_pass0_tfrozen_src39 appears to have run properly
[Sat Oct 22 15:16:25 2011] Spatial fit model total counts = 62.804400, observed total counts = 63.000000
[Sat Oct 22 15:16:25 2011] Offset between fit and detection position for source 72 = 0.375372 pixels
[Sat Oct 22 15:16:25 2011] 63.717300 total counts/ 37.091800 bgd. counts: snr = 4.371785
Spatial fit parameters:
  Offset between fit and detection position for source 72 = 0.375372 pixels
  Position = (1063.6, 1043.1) = 11 50 45.80 -28 44 44.7
  Extent = 1.3 (0.6-2.0)", rotation angle = 0
  Source counts = 26.6 +/- 8.0
  Background counts = 37.1
  Rate = 0.0003 +/- 0.0001
[Sat Oct 22 15:16:25 2011] Vigneting correction estimate = 1.000000
[Sat Oct 22 15:16:25 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 22 15:16:25 2011] Assessing source extent using major axis lower bound
[Sat Oct 22 15:16:25 2011] Source does appear to be extended
[Sat Oct 22 15:16:25 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 22 15:16:46 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Oct 22 15:16:46 2011] Initial guess for spatial extent in simple fitting = 1.27"
[Sat Oct 22 15:16:46 2011] source mask rpix=2.6, npix_max = 37, mask sum = 36, frac = 0.950
[Sat Oct 22 15:16:46 2011] Giving source the simple spatial ID 36 for pass 1, mean size = 1.27"
[Sat Oct 22 15:16:49 2011] fullrun_ccd7_acisf09507_pi14-548_cl_pass1_src36.ximg exists
[Sat Oct 22 15:16:49 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf09507_pi14-548_cl_pass1_src36.csv
[Sat Oct 22 15:16:49 2011] fullrun_ccd7_acisf09507_pi14-548_cl_pass1_src36_1.ximg exists
[Sat Oct 22 15:16:49 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf09507_pi14-548_cl_pass1_src36.csv
[Sat Oct 22 15:16:49 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf09507_pi14-548_cl_pass1_src36_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf09507_pi14-548_cl_pass1_src36.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 22 15:16:51 2011] fullrun_ccd7_acisf09507_pi14-548_cl_pass1_tfrozen_src36.ximg exists
[Sat Oct 22 15:16:51 2011] fullrun_ccd7_acisf09507_pi14-548_cl_pass1_tfrozen_src36_1.ximg exists
[Sat Oct 22 15:16:51 2011] Fit fullrun_ccd7_acisf09507_pi14-548_cl_pass1_tfrozen_src36 appears to have run properly
[Sat Oct 22 15:17:10 2011] Spatial fit model total counts = 44.974600, observed total counts = 45.000000
[Sat Oct 22 15:17:10 2011] Offset between fit and detection position for source 72 = 0.851264 pixels
[Sat Oct 22 15:17:10 2011] 46.882900 total counts/ 28.034300 bgd. counts: snr = 3.559871
Spatial fit parameters:
  Offset between fit and detection position for source 72 = 0.851264 pixels
  Position = (1062.8, 1043.1) = 11 50 45.83 -28 44 44.7
  Extent = 0.9 (0.4-2.2)", rotation angle = 0
  Source counts = 18.8 +/- 6.8
  Background counts = 28.0
  Rate = 0.0002 +/- 8e-05
[Sat Oct 22 15:17:10 2011] Vigneting correction estimate = 1.000000
[Sat Oct 22 15:17:10 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 22 15:17:10 2011] Assessing source extent using major axis lower bound
[Sat Oct 22 15:17:10 2011] Source does appear to be extended
[Sat Oct 22 15:17:10 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 22 15:19:06 2011] Not overwriting source region fullrun_ccd7_acisf09507_pi14-548_pass1_cl_src72_src.reg
[Sat Oct 22 15:19:06 2011] Extracting stamp from image fullrun_ccd7_acisf09507_pi14-548_cl_sm2.00.img.gz, (1021, 1002) - (1104, 1084)
[Sat Oct 22 15:19:06 2011] Writing fullrun_ccd7_acisf09507_pi14-548_pass1_cl_src72.gif
[Sat Oct 22 15:20:54 2011] ../../acisf09507/products/events/fullrun_ccd7_acisf09507_pi14-548_pass1_cl_src72_src.evt and ../../acisf09507/products/events/fullrun_ccd7_acisf09507_pi14-548_pass1_cl_src72_bgd.evt exist, delete to re-create
[Sat Oct 22 15:20:54 2011] Size of ../../acisf09507/products/events/fullrun_ccd7_acisf09507_pi14-548_pass1_cl_src72_src.evt.gz[events] = 40 counts
[Sat Oct 22 15:20:54 2011] Mean chipx,y = (962.58, 564.85)
[Sat Oct 22 15:20:54 2011] Mean tdetx,y = (4879.57, 2266.85)
[Sat Oct 22 15:20:54 2011] chipx,y range = (944.00-979.00, 543.00-581.00)
[Sat Oct 22 15:20:54 2011] Size of ../../acisf09507/products/events/fullrun_ccd7_acisf09507_pi14-548_pass1_cl_src72_bgd.evt.gz[events] = 162 counts
[Sat Oct 22 15:20:54 2011] ../../acisf09507/products/images/fullrun_ccd7_acisf09507_pi14-548_pass1_cl_src72_src.img and ../../acisf09507/products/images/fullrun_ccd7_acisf09507_pi14-548_pass1_cl_src72_bgd.img exist, delete to re-create
[Sat Oct 22 15:20:54 2011] ../../acisf09507/products/spectra/fullrun_ccd7_acisf09507_pi14-548_pass1_cl_src72_src.pi and ../../acisf09507/products/spectra/fullrun_ccd7_acisf09507_pi14-548_pass1_cl_src72_bgd.pi exist, delete to re-create
[Sat Oct 22 15:20:54 2011] Not generating rmf since there are only 18 counts
[Sat Oct 22 15:20:56 2011] ../../acisf09507/products/lightcurves/fullrun_ccd7_acisf09507_pi14-548_pass1_cl_src72_src.lc and ../../acisf09507/products/lightcurves/fullrun_ccd7_acisf09507_pi14-548_pass1_cl_src72_bgd.lc exist, delete to re-create
[Sat Oct 22 15:23:03 2011] 208.031
[Sat Oct 22 15:23:10 2011] Updating aperture counts using extracted products
[Sat Oct 22 15:23:10 2011] Error reading totcts from fullrun_ccd7_acisf09507_pi14-548_pass1_cl_src72_src.pi.gz
[Sat Oct 22 15:23:10 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct 22 15:23:10 2011] Using photon index=1.80, rate=0.000233, arf fullrun_ccd7_acisf09507_pi14-548_pass1_cl_src72.arf
[Sat Oct 22 15:23:10 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct 22 15:23:10 2011] Updating source flux to 1.9e-15
[Sat Oct 22 15:23:33 2011] Source 72 has fewer than 100.000000 counts, skipping spectral fitting