[Sat Oct 22 15:14:07 2011] Detection parameters:
  Position = (813.4, 802.4) = 11 50 36.56 -28 59 10.6
  Extent = 2.7" x 2.0", rotation angle = 142 degrees
  Source counts = 92.8 +/- 14.2
  Background counts = 109.2
  Rate = 0.001 +/- 0.0002

[Sat Oct 22 15:14:08 2011] Off-axis axis estimate = 11.89'
[Sat Oct 22 15:15:52 2011] Using EEF radius (= 6.31 ")to estimate initial spatial extent for simple fitting
[Sat Oct 22 15:15:52 2011] Initial guess for spatial extent in simple fitting = 6.31"
[Sat Oct 22 15:15:52 2011] source mask rpix=12.8, npix_max = 709, mask sum = 729, frac = 1.027
[Sat Oct 22 15:15:52 2011] Giving source the simple spatial ID 4 for pass 0, mean size = 6.31"
[Sat Oct 22 15:15:53 2011] fullrun_ccd2_acisf09507_pi14-548_cl_pass0_src4.ximg exists
[Sat Oct 22 15:15:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf09507_pi14-548_cl_pass0_src4.csv
[Sat Oct 22 15:15:53 2011] fullrun_ccd2_acisf09507_pi14-548_cl_pass0_src4_1.ximg exists
[Sat Oct 22 15:15:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf09507_pi14-548_cl_pass0_src4.csv
[Sat Oct 22 15:15:53 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf09507_pi14-548_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf09507_pi14-548_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 22 15:15:53 2011] fullrun_ccd2_acisf09507_pi14-548_cl_pass0_tfrozen_src4.ximg exists
[Sat Oct 22 15:15:53 2011] fullrun_ccd2_acisf09507_pi14-548_cl_pass0_tfrozen_src4_1.ximg exists
[Sat Oct 22 15:15:53 2011] Fit fullrun_ccd2_acisf09507_pi14-548_cl_pass0_tfrozen_src4 appears to have run properly
[Sat Oct 22 15:16:08 2011] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 71.869164 pixels away
[Sat Oct 22 15:16:08 2011] Vigneting correction estimate = 1.000000
[Sat Oct 22 15:16:08 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 22 15:16:08 2011] Assessing source extent using major
[Sat Oct 22 15:16:08 2011] Source does appear to be extended
[Sat Oct 22 15:16:08 2011] Computing asymmetry using major and minor axis, asym = 1.35
[Sat Oct 22 15:16:42 2011] Using EEF radius (= 6.31 ")to estimate initial spatial extent for simple fitting
[Sat Oct 22 15:16:42 2011] Initial guess for spatial extent in simple fitting = 6.31"
[Sat Oct 22 15:16:42 2011] source mask rpix=12.8, npix_max = 709, mask sum = 729, frac = 1.027
[Sat Oct 22 15:16:42 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 6.31"
[Sat Oct 22 15:16:43 2011] fullrun_ccd2_acisf09507_pi14-548_cl_pass1_src3.ximg exists
[Sat Oct 22 15:16:43 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf09507_pi14-548_cl_pass1_src3.csv
[Sat Oct 22 15:16:43 2011] fullrun_ccd2_acisf09507_pi14-548_cl_pass1_src3_1.ximg exists
[Sat Oct 22 15:16:43 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf09507_pi14-548_cl_pass1_src3.csv
[Sat Oct 22 15:16:43 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf09507_pi14-548_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf09507_pi14-548_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 22 15:16:43 2011] fullrun_ccd2_acisf09507_pi14-548_cl_pass1_tfrozen_src3.ximg exists
[Sat Oct 22 15:16:43 2011] fullrun_ccd2_acisf09507_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists
[Sat Oct 22 15:16:43 2011] Fit fullrun_ccd2_acisf09507_pi14-548_cl_pass1_tfrozen_src3 appears to have run properly
[Sat Oct 22 15:16:56 2011] Spatial fit model total counts = 385.817000, observed total counts = 386.000000
[Sat Oct 22 15:16:56 2011] Offset between fit and detection position for source 5 = 4.454876 pixels
[Sat Oct 22 15:16:56 2011] 385.300000 total counts/ 250.829000 bgd. counts: snr = 8.490627
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 4.454876 pixels
  Position = (817.6, 800.9) = 11 50 36.42 -28 59 11.6
  Extent = 7.1 (5.7-9.6)", rotation angle = 0
  Source counts = 134.5 +/- 19.6
  Background counts = 250.8
  Rate = 0.002 +/- 0.0002
[Sat Oct 22 15:16:56 2011] Vigneting correction estimate = 1.000000
[Sat Oct 22 15:16:56 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 22 15:16:56 2011] Assessing source extent using major axis lower bound
[Sat Oct 22 15:16:56 2011] Source does appear to be extended
[Sat Oct 22 15:16:56 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 22 15:17:27 2011] Not overwriting source region fullrun_ccd2_acisf09507_pi14-548_pass1_cl_src5_src.reg
[Sat Oct 22 15:17:27 2011] Extracting stamp from image fullrun_ccd2_acisf09507_pi14-548_cl_sm2.00.img.gz, (492, 476) - (1143, 1126)
[Sat Oct 22 15:17:27 2011] Writing fullrun_ccd2_acisf09507_pi14-548_pass1_cl_src5.gif
[Sat Oct 22 15:17:36 2011] ../../acisf09507/products/events/fullrun_ccd2_acisf09507_pi14-548_pass1_cl_src5_src.evt and ../../acisf09507/products/events/fullrun_ccd2_acisf09507_pi14-548_pass1_cl_src5_bgd.evt exist, delete to re-create
[Sat Oct 22 15:17:36 2011] Size of ../../acisf09507/products/events/fullrun_ccd2_acisf09507_pi14-548_pass1_cl_src5_src.evt.gz[events] = 396 counts
[Sat Oct 22 15:17:36 2011] Mean chipx,y = (485.06, 640.77)
[Sat Oct 22 15:17:36 2011] Mean tdetx,y = (3701.77, 3600.94)
[Sat Oct 22 15:17:36 2011] chipx,y range = (417.00-550.00, 575.00-710.00)
[Sat Oct 22 15:17:36 2011] Size of ../../acisf09507/products/events/fullrun_ccd2_acisf09507_pi14-548_pass1_cl_src5_bgd.evt.gz[events] = 3140 counts
[Sat Oct 22 15:17:36 2011] ../../acisf09507/products/images/fullrun_ccd2_acisf09507_pi14-548_pass1_cl_src5_src.img and ../../acisf09507/products/images/fullrun_ccd2_acisf09507_pi14-548_pass1_cl_src5_bgd.img exist, delete to re-create
[Sat Oct 22 15:17:36 2011] ../../acisf09507/products/spectra/fullrun_ccd2_acisf09507_pi14-548_pass1_cl_src5_src.pi and ../../acisf09507/products/spectra/fullrun_ccd2_acisf09507_pi14-548_pass1_cl_src5_bgd.pi exist, delete to re-create
[Sat Oct 22 15:17:39 2011] ../../acisf09507/products/lightcurves/fullrun_ccd2_acisf09507_pi14-548_pass1_cl_src5_src.lc and ../../acisf09507/products/lightcurves/fullrun_ccd2_acisf09507_pi14-548_pass1_cl_src5_bgd.lc exist, delete to re-create
[Sat Oct 22 15:17:43 2011] Keeping rmf generated by specextract
[Sat Oct 22 15:17:43 2011] 154.279
[Sat Oct 22 15:23:08 2011] Updating aperture counts using extracted products
[Sat Oct 22 15:23:08 2011] Error reading totcts from fullrun_ccd2_acisf09507_pi14-548_pass1_cl_src5_src.pi.gz
[Sat Oct 22 15:23:08 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct 22 15:23:08 2011] Using photon index=1.80, rate=0.00166, arf fullrun_ccd2_acisf09507_pi14-548_pass1_cl_src5.arf
[Sat Oct 22 15:23:08 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct 22 15:23:08 2011] Updating source flux to 2.3e-14