[Sat Oct 22 15:14:07 2011] Detection parameters:
  Position = (1162.8, 918.2) = 11 50 23.46 -28 58 13.4
  Extent = 3.9" x 3.9", rotation angle = 102 degrees
  Source counts = 58.3 +/- 14.3
  Background counts = 145.7
  Rate = 0.0007 +/- 0.0002

[Sat Oct 22 15:14:08 2011] Off-axis axis estimate = 12.99'
[Sat Oct 22 15:15:52 2011] Using EEF radius (= 7.57 ")to estimate initial spatial extent for simple fitting
[Sat Oct 22 15:15:52 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Oct 22 15:15:52 2011] Initial guess for spatial extent in simple fitting = 7.57"
[Sat Oct 22 15:15:52 2011] source mask rpix=15.4, npix_max = 1010, mask sum = 1024, frac = 1.014
[Sat Oct 22 15:15:52 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 7.57"
[Sat Oct 22 15:15:53 2011] fullrun_ccd2_acisf09507_pi14-548_cl_pass0_src1.ximg exists
[Sat Oct 22 15:15:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf09507_pi14-548_cl_pass0_src1.csv
[Sat Oct 22 15:15:53 2011] fullrun_ccd2_acisf09507_pi14-548_cl_pass0_src1_1.ximg exists
[Sat Oct 22 15:15:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf09507_pi14-548_cl_pass0_src1.csv
[Sat Oct 22 15:15:53 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf09507_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf09507_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 22 15:15:53 2011] fullrun_ccd2_acisf09507_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Sat Oct 22 15:15:53 2011] fullrun_ccd2_acisf09507_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Oct 22 15:15:53 2011] Fit fullrun_ccd2_acisf09507_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Sat Oct 22 15:16:08 2011] Spatial fit model total counts = 533.077000, observed total counts = 536.000000
[Sat Oct 22 15:16:08 2011] Offset between fit and detection position for source 1 = 2.376539 pixels
[Sat Oct 22 15:16:08 2011] 531.864000 total counts/ 397.524000 bgd. counts: snr = 6.737886
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 2.376539 pixels
  Position = (1161.9, 920.4) = 11 50 23.51 -28 58 12.6
  Extent = 9.9 (6.6-15.1)", rotation angle = 0
  Source counts = 134.3 +/- 23.1
  Background counts = 397.5
  Rate = 0.002 +/- 0.0003
[Sat Oct 22 15:16:08 2011] Vigneting correction estimate = 1.000000
[Sat Oct 22 15:16:08 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 22 15:16:08 2011] Assessing source extent using major axis lower bound
[Sat Oct 22 15:16:08 2011] Source does appear to be extended
[Sat Oct 22 15:16:08 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 22 15:16:42 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Oct 22 15:16:42 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Oct 22 15:16:42 2011] Initial guess for spatial extent in simple fitting = 9.86"
[Sat Oct 22 15:16:42 2011] source mask rpix=20.0, npix_max = 1688, mask sum = 1681, frac = 0.996
[Sat Oct 22 15:16:42 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 9.86"
[Sat Oct 22 15:16:43 2011] fullrun_ccd2_acisf09507_pi14-548_cl_pass1_src1.ximg exists
[Sat Oct 22 15:16:43 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf09507_pi14-548_cl_pass1_src1.csv
[Sat Oct 22 15:16:43 2011] fullrun_ccd2_acisf09507_pi14-548_cl_pass1_src1_1.ximg exists
[Sat Oct 22 15:16:43 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf09507_pi14-548_cl_pass1_src1.csv
[Sat Oct 22 15:16:43 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf09507_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf09507_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 22 15:16:43 2011] fullrun_ccd2_acisf09507_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Sat Oct 22 15:16:43 2011] fullrun_ccd2_acisf09507_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Oct 22 15:16:43 2011] Fit fullrun_ccd2_acisf09507_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Sat Oct 22 15:16:56 2011] Spatial fit model total counts = 812.469000, observed total counts = 780.000000
[Sat Oct 22 15:16:56 2011] Offset between fit and detection position for source 1 = 3.317961 pixels
[Sat Oct 22 15:16:56 2011] 811.377000 total counts/ 663.047000 bgd. counts: snr = 5.760456
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 3.317961 pixels
  Position = (1158.6, 920.3) = 11 50 23.64 -28 58 12.7
  Extent = 10.5 (7.7-14.4)", rotation angle = 0
  Source counts = 148.3 +/- 28.5
  Background counts = 663.0
  Rate = 0.002 +/- 0.0004
[Sat Oct 22 15:16:56 2011] Vigneting correction estimate = 1.000000
[Sat Oct 22 15:16:56 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 22 15:16:56 2011] Assessing source extent using major axis lower bound
[Sat Oct 22 15:16:56 2011] Source does appear to be extended
[Sat Oct 22 15:16:56 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 22 15:17:27 2011] Not overwriting source region fullrun_ccd2_acisf09507_pi14-548_pass1_cl_src1_src.reg
[Sat Oct 22 15:17:27 2011] Extracting stamp from image fullrun_ccd2_acisf09507_pi14-548_cl_sm2.00.img.gz, (680, 441) - (1449, 1399)
[Sat Oct 22 15:17:27 2011] Writing fullrun_ccd2_acisf09507_pi14-548_pass1_cl_src1.gif
[Sat Oct 22 15:17:28 2011] ../../acisf09507/products/events/fullrun_ccd2_acisf09507_pi14-548_pass1_cl_src1_src.evt and ../../acisf09507/products/events/fullrun_ccd2_acisf09507_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Sat Oct 22 15:17:28 2011] Size of ../../acisf09507/products/events/fullrun_ccd2_acisf09507_pi14-548_pass1_cl_src1_src.evt.gz[events] = 730 counts
[Sat Oct 22 15:17:28 2011] Mean chipx,y = (305.04, 951.25)
[Sat Oct 22 15:17:28 2011] Mean tdetx,y = (4012.25, 3780.96)
[Sat Oct 22 15:17:28 2011] chipx,y range = (205.00-397.00, 857.00-1022.00)
[Sat Oct 22 15:17:28 2011] Size of ../../acisf09507/products/events/fullrun_ccd2_acisf09507_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 4134 counts
[Sat Oct 22 15:17:28 2011] ../../acisf09507/products/images/fullrun_ccd2_acisf09507_pi14-548_pass1_cl_src1_src.img and ../../acisf09507/products/images/fullrun_ccd2_acisf09507_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Sat Oct 22 15:17:28 2011] ../../acisf09507/products/spectra/fullrun_ccd2_acisf09507_pi14-548_pass1_cl_src1_src.pi and ../../acisf09507/products/spectra/fullrun_ccd2_acisf09507_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Sat Oct 22 15:17:30 2011] ../../acisf09507/products/lightcurves/fullrun_ccd2_acisf09507_pi14-548_pass1_cl_src1_src.lc and ../../acisf09507/products/lightcurves/fullrun_ccd2_acisf09507_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Sat Oct 22 15:17:43 2011] Keeping rmf generated by specextract
[Sat Oct 22 15:17:43 2011] 149.783
[Sat Oct 22 15:23:08 2011] Updating aperture counts using extracted products
[Sat Oct 22 15:23:08 2011] Error reading totcts from fullrun_ccd2_acisf09507_pi14-548_pass1_cl_src1_src.pi.gz
[Sat Oct 22 15:23:08 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct 22 15:23:08 2011] Using photon index=1.80, rate=0.00183, arf fullrun_ccd2_acisf09507_pi14-548_pass1_cl_src1.arf
[Sat Oct 22 15:23:08 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct 22 15:23:08 2011] Updating source flux to 2.5e-14
[Sat Oct 22 15:23:24 2011] Reading fit data from acisf09507/analysis//spectral/fullrun_ccd2_acisf09507_pi14-548_pass1_cl_src1_pl.csv
[Sat Oct 22 15:23:24 2011] Spectral fit parameter nH value = 2.00966e+12
[Sat Oct 22 15:23:24 2011] Spectral fit parameter PhoIndex value = 0.57135
[Sat Oct 22 15:23:24 2011] Failed to get F(0.3-8.0) from acisf09507/analysis//spectral/fullrun_ccd2_acisf09507_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sat Oct 22 15:23:24 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct 22 15:23:24 2011] Using Nh = 2e+12, photon index=0.57, rate=0.00183, arf fullrun_ccd2_acisf09507_pi14-548_pass1_cl_src1.arf
[Sat Oct 22 15:23:24 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct 22 15:23:24 2011] Updating source flux to 4.4e-14